Zalman I3 NEO Black Edition Airflow ATX Computer Case with Mesh Front Panel, Magnetic Swing-Open Tempered Glass Side Panel, 4X RGB 120mm Fans Pre-Installed, Mid Tower for Gaming or Office Work

I got the case its perfect just had a fan that would make noise every so often I smack it and it temporarily fixes it I dont recommend my methods of repair

In 25 yrs I built over 400 units, I have completed a computer in 30 minutes and other times 1 hour. This case is CASE FROM HELL!!!! After doing all my connections, unable to mount in case. Standoffs DEFECTIVE!!, SCREWS WOULDNT FIT, OR GO IN AT AN ANGLE AND WOULDNT COME OUT. HAD TO UNWIRE BOARD take out, replace all standoffs, and new screws. Waste of over 4 hours wiring and un wiring , and still hard time to install, Im GREAT at what I do. This case made me look like a 1st NOVICE TOOK AND THREW OUT THE WINDOW WHILE FOING 80MPH, JUST PUNISHMENT FOR THIS CASE!!!!! Thank God Amazon REFUNDED MY MONEY, and was able to get new case, and 30 minutes later computer was done. John F from New York

So some people did point out its not the best material which I guess Is fair but for 70 some dollars its a fantastic if not one of the best budget options it as long as you dont like bend the metal its not super flimsy but the fans keep your system cool and its got a nice bit of space I personally dont really like the front part thing (the thing in front of the 3 fans) but its definitely a fantastic option would recommend Also the fans arent noisy but I dont like the static rgb vomit not my thing thats all but they perform great plus the gave a connecter thing so you only have to plug it one thing for the front and one for the back And again for the third time fantastic choice

i would buy this case again

Very easy to work in. Cable management was easy. Included all the accessory. I removed the drive cage because it was not needed. The last few cases I have bought in the past were NZXT, Thermaltake, and Phantek. I built a AMD R5 3600 with a RX5700xt (ASUS strix motherboard) for my son. I would recommend this case. The RGB led fan are static which be a negative for some people. I dont mind since but I dont like loading unnecessary LED control software on my computer. I would also recommend the M3 (white led).

Cable management is easy, lots of room for a relatively compact case, can fit a 4070ti no problem. Definitely worth the price!

Let me start off with the packaging, this case came in a normal PC case box but what threw me off was that it came with this squishy foam-like material which in my experience was great. Unlike most cases that come in squeaky foam, this one does not break off easily and protects the case very well. Let me start off with the things I like most about this case. 1) The glass is on hinges which is very nice for convenience when switching out parts or even adding a little figure inside the PC. 2) The case comes with four RGB fans that are included so you dont have to buy fans would work perfectly fine with putting one of the front fans on top. 3) This case has a very nice hard drive and SSD tray that you can pull out without having to use any screwdrivers. 4) On the back where it comes with screws, it includes a glass cleaner wipe, USB plugs so dust doesnt accumulate, and extra GPU brackets so if you decide you want to switch out your motherboard it wont have a hole on the back. 5) This case also has a big spot on the top so you can mount bigger or smaller fans. 6) It also has very good airflow because of the mesh front. 7) Has enough space in the front of the PSU and the glass to put a sensor panel if you wanted to add one because I personally have not seen this on another product. The market doesnt have this design leading people to put the sensor panel on top of the PSU shroud or on the back exhaust fan spot. Now for the things I wish this case has. 1) A bigger space to put more hard drives or SSD because even though the spot for the hard drive, there is only one so the max amount of hhd and SSD you could fit is three. One on the back of the motherboard, two on the hard drive case near the PSU, and two in the front but for the ones in the front, those are a bit harder for the cables to reach and the cable management for the cables wouldnt be as pleasant to see. 2) The other thing is that when routing the cables in the back, it was a little difficult because the cutouts are very close to each other so this leave holes and if you have some cables that are not long enough, then youd have to run it up against the holes. Overall, other than these two things that I have listed above, this case is amazing to build and look at and doesnt feel cheap. If you are buying a case/ or looking for a case for your next build consider this one to be one of your top PC cases.

I knew better then to cheap out on a case. Been building PCs forever and I did like this case but Ill tell you this. Do not buy this case. None of the holes for the rear aka GPU brackets allowed any screwed to be threaded to secure my GPU. Next the stand offs on the motherboard seemed off. If you lined up some others would be slightly off. Next this case is made with super thin metal. You can literally bend and flex everything by hand. Super cheap and thin metal. Never again will I buy a cheap case

The quality of the metal is better than cases that I have paid twice as much for was packed up for shipping really good and even showed up a day early was really nice building in it plenty of room and the door is pretty cool the only flaw that I have found so far is that one of the fans makes some noticeable noise but I just didnt use that one and case still has really good air flow

If your shopping for a PC case on a budget this is it!