2023 New Upgrade WiFi Extender Booster Repeater, Up to 8000sq.ft and 45+ Devices, 2.4&5GHz Dual Band Wireless Internet Repeater and Signal Amplifier for Home & Outdoor, Supports Ethernet Port
-
PATRICIA
> 24 hourHave the internet connected upstairs so even though it worked downstairs, it was slow and sometimes signal was not that strong. I used the TP-link downstairs and it solved all my problems, Fast/strong signal.
-
JERRY
> 24 hourIt was a little painful getting set up, but works excellently! I needed it to extend my wifi to my garage for an IP camera and the router was on the opposite end of the house through 4 walls and it still performs beautifully!
-
nkDN
> 24 hour...kann man nicht zufrieden sein.
-
JOYCE
> 24 hourMy love affair with started with their Smart Mini-Plugs and Smart Dimmable Lightbulbs. I have already set up 9 of them and will do several more now that my dead zones are active. There is no hub to fool with and set-up is a breeze. I also set up some groups so I can control whole areas if I want to. This is all so much FUN!
-
Kiki
> 24 hourMaterial ist klasse und kommt genug leistung an. Bis jetzt hatten wir keine Probleme mit dem Kabel. Also nur weiter zuempfehlen..
-
MARGARET
> 24 hourUsing it in the basement, router is on the other side of my house and upstairs. The device works good, amazing wifi signal to the Roku on the basement TV. I can now use my Kindle on the outside deck.
-
KEITH
> 24 hourI got this Wifi extender so I could make my signal from the living room reach to the FROG. Well it did the trick. Setup was decently easy, no super mumbo jumbo computer technical stuff. Is simple and delivers.
-
R.Hermann Prudlik
> 24 hourTop
-
Olli
> 24 hourAufgrund steter Disconnects der Playstation 3 über WLAN, sollte beim Erscheinen der PS4 kein Risiko eingegangen werden. Das Kabel hat eine perfekte Länge von 10 Metern im meinem Fall und auch die Verbindung ist einwandfrei.
-
David
> 24 hourSchnelle Lieferung, qualitativ gut verarbeitet.
|
|
|
|
|---|---|---|
4*3 dBi External Antennas180° and 90° rotating antennas can eliminate dead area and improve your existing WiFi coverage. For better performance and stable WiFi network with speeds of up to 867Mbps, 2.4GHz has farther penetration while 5GHz has faster speed. |
Smart Signal IndicatorsSignal LED indicates wireless signal strength between WiFi extender and your existing router. After initial setup, you can move your WiFi extender to any electrical outlets by reading the color of signal LED. |
With Vent Hole & WAN / LAN PortAir vents on both sides enhance heat dissipation capacity of the WiFi extender and ensure a safe working environment. Its WAN / LAN Port allows the WiFi extender to act as a wireless adapter to turn a wired device into a wireless one. |
|
|
|
|
|---|---|---|
Repeater Mode - Wireless to WirelessAmplify the WiFi signal of the wireless router, extend the coverage of the WiFi signal, and effectively solve the problem of weak WiFi signal and WiFi dead zone. (Suitable for home, office use) |
Repeater Mode - Wireless to WiredConvert wifi signals into wired signals through network cables to meet the network requirements of wired electronic devices, such as TVs, desktop computers, etc., reduce the distance of network cables, and avoid cluttered network wiring. |
Access Point Mode- Wired to WirelessUse Ethernet cable to connect this WiFi booster range extender to any Internet enabled Ethernet port in your room or Ethernet port of existing router, you can create a new dual band wireless network. Excellent for using at home or when travelling in hotel rooms. |
Reminder:
- The working status of the repeater can refer to its smart indicator light.
- WiFi signal booster is only limited to increase the coverage of the wireless signal, but not to increase the speed of the network.
- When the repeater expands the signal, it does not need to plug in the network cable. It can receive the signal of the router directly by plugging it into the socket, and transmit the wireless signal.
- When the repeater is unplugged or powered off after the setting is completed, it does not need to be reset. The original configuration information has been saved, unless you manually restore the factory state.
Related products
