2023 New Upgrade WiFi Extender Booster Repeater, Up to 8000sq.ft and 45+ Devices, 2.4&5GHz Dual Band Wireless Internet Repeater and Signal Amplifier for Home & Outdoor, Supports Ethernet Port
-
Mustafa Ceylan
> 3 dayIch hatte erst bei einem anderem Verkäufer bestellt aber das Produkt hat nicht funktioniert.
-
JOYCE
> 3 dayGood piece of equipment. I bought this because my room did not have a good connection to the main wifi since it is on the other end of the house. As long as you follow the instruction booklet that comes, and register correctly online, it works perfectly.
-
Magister Curie
Greater than one weekSchönes, stabiles und saugünstiges Kabel und die günstigste Lösung für alle, die z.B. wie ich diese bis zu 32.000 kbit-Leitung von KD ihr eigen nennen können/dürfen/müssen!
-
Oswald Brotschinsky
> 3 dayEin wirklich sehr gutes Kabel, das ich in meinem Gigabit Netzwerk benutze. Ich habe bereits vom selben Hersteller ein solches Kabel in der Länge 50m gekauft und bin sehr zufrieden damit.
-
JW
> 3 dayIch lasse kein Gigabit drüber laufen, sondern nur DMX... und da tut das Kabel was es soll!
-
yhguhbg
> 3 dayPerfect! We love this and it serves our two roku boxes at the back of the house. Works as stated and was incredibly easy to set up.
-
CHRISTINE
Greater than one weekThe router is in the basement and was getting 3 bars on the Apple TV upstairs. I put this in the room next to the apple tv and am now getting 5 bars reception.
-
Marysol
> 3 dayKabel sehr anfällig zu Knicke.
-
JERRY
> 3 daypretty easy enough to setup. Could be more intuitive but not too bad...just take a bit of focus.Like the flexibility of using wifi or cat 5 cable to connect. Great item - did a great job at creating a secondary wifi signal. I was hoping it would help strengthen the existing signal but this works as great.
-
CHRISTINE
Greater than one weekIt was very pretty easy to set up and works as I hoped it would.Works really great. The wifi connection is awesome. It boosted it and I went from 5.2 Mbps to 25. I am very satisfied with this product and would highly highly recommend it. I plugged it in 30 feet away and around a corner from the source, and it had no problem connecting. Great product!!
|
|
|
|
|---|---|---|
4*3 dBi External Antennas180° and 90° rotating antennas can eliminate dead area and improve your existing WiFi coverage. For better performance and stable WiFi network with speeds of up to 867Mbps, 2.4GHz has farther penetration while 5GHz has faster speed. |
Smart Signal IndicatorsSignal LED indicates wireless signal strength between WiFi extender and your existing router. After initial setup, you can move your WiFi extender to any electrical outlets by reading the color of signal LED. |
With Vent Hole & WAN / LAN PortAir vents on both sides enhance heat dissipation capacity of the WiFi extender and ensure a safe working environment. Its WAN / LAN Port allows the WiFi extender to act as a wireless adapter to turn a wired device into a wireless one. |
|
|
|
|
|---|---|---|
Repeater Mode - Wireless to WirelessAmplify the WiFi signal of the wireless router, extend the coverage of the WiFi signal, and effectively solve the problem of weak WiFi signal and WiFi dead zone. (Suitable for home, office use) |
Repeater Mode - Wireless to WiredConvert wifi signals into wired signals through network cables to meet the network requirements of wired electronic devices, such as TVs, desktop computers, etc., reduce the distance of network cables, and avoid cluttered network wiring. |
Access Point Mode- Wired to WirelessUse Ethernet cable to connect this WiFi booster range extender to any Internet enabled Ethernet port in your room or Ethernet port of existing router, you can create a new dual band wireless network. Excellent for using at home or when travelling in hotel rooms. |
Reminder:
- The working status of the repeater can refer to its smart indicator light.
- WiFi signal booster is only limited to increase the coverage of the wireless signal, but not to increase the speed of the network.
- When the repeater expands the signal, it does not need to plug in the network cable. It can receive the signal of the router directly by plugging it into the socket, and transmit the wireless signal.
- When the repeater is unplugged or powered off after the setting is completed, it does not need to be reset. The original configuration information has been saved, unless you manually restore the factory state.
