2023 New Upgrade WiFi Extender Booster Repeater, Up to 8000sq.ft and 45+ Devices, 2.4&5GHz Dual Band Wireless Internet Repeater and Signal Amplifier for Home & Outdoor, Supports Ethernet Port
-
BENJAMIN
> 3 dayThis is easy to set up and good for ps4 download speeds. A must have because I almost got rid of my ps4.
-
Majid C.
Greater than one weekIch musste mir mal ein solches Kabel zulegen um eine Direktverbindung zwischen PC und dem Modem zu gewährleisten.
-
JEREMY
> 3 dayI had a Smart TV that had poor connection. As the distance between the two is over 80ft. I bought it and used as directed. The result was a good wifi connection for the TV.The setup is as easy as it could be, clear step-by-step instructions.
-
Philipp E.
> 3 dayHohe Flexibilität, guter Clips am Stecker
-
BENJAMIN
> 3 dayGot it to extend our signal to the first floor of our house (our router is in our bedroom on the 2nd floor) and so far it has done the job really well. Recommended.
-
W. Hantsche
> 3 dayDas Kabel hat stabile Stecker und sie sitzen fest im Anschluß.Es ist gut ummantelt und flexibel.Es läßst sich gut um Ecken verlegen.Außerdem eine schnelle Lieferung.
-
Huhu
> 3 dayUnd es macht nocht etwas mehr. Es ist nicht grau oder weiß oder sonstwie, sondern in schwarz. Das war mir wichtig. Alle Kabel hinter dem TV-Rack sollen zukünftig in Schwarz sein, damit es einheitlich Ausschaut.
-
ALBERT
> 3 daySuper easy to install, works excellent! Highly recommend this product. I was having poor signal from my wifi to my Amazon Stick... now that the extender is installed I have great signal.
-
REBECCA
> 3 dayIm still waiting for something to go wrong. But so far everything has worked perfectly. I can now access wifi on my porch without any difficulty mainly with Apple products. Set up couldnt be easier. Just push two buttons. Great product!
-
Janine
Greater than one weekIch benötigte ein langes Kabel von meinem Router zum TV und deshalb habe ich mir dieses Kabel gekauft. Das Kabel ist so wie es sein sollte.
|
|
|
|
|---|---|---|
4*3 dBi External Antennas180° and 90° rotating antennas can eliminate dead area and improve your existing WiFi coverage. For better performance and stable WiFi network with speeds of up to 867Mbps, 2.4GHz has farther penetration while 5GHz has faster speed. |
Smart Signal IndicatorsSignal LED indicates wireless signal strength between WiFi extender and your existing router. After initial setup, you can move your WiFi extender to any electrical outlets by reading the color of signal LED. |
With Vent Hole & WAN / LAN PortAir vents on both sides enhance heat dissipation capacity of the WiFi extender and ensure a safe working environment. Its WAN / LAN Port allows the WiFi extender to act as a wireless adapter to turn a wired device into a wireless one. |
|
|
|
|
|---|---|---|
Repeater Mode - Wireless to WirelessAmplify the WiFi signal of the wireless router, extend the coverage of the WiFi signal, and effectively solve the problem of weak WiFi signal and WiFi dead zone. (Suitable for home, office use) |
Repeater Mode - Wireless to WiredConvert wifi signals into wired signals through network cables to meet the network requirements of wired electronic devices, such as TVs, desktop computers, etc., reduce the distance of network cables, and avoid cluttered network wiring. |
Access Point Mode- Wired to WirelessUse Ethernet cable to connect this WiFi booster range extender to any Internet enabled Ethernet port in your room or Ethernet port of existing router, you can create a new dual band wireless network. Excellent for using at home or when travelling in hotel rooms. |
Reminder:
- The working status of the repeater can refer to its smart indicator light.
- WiFi signal booster is only limited to increase the coverage of the wireless signal, but not to increase the speed of the network.
- When the repeater expands the signal, it does not need to plug in the network cable. It can receive the signal of the router directly by plugging it into the socket, and transmit the wireless signal.
- When the repeater is unplugged or powered off after the setting is completed, it does not need to be reset. The original configuration information has been saved, unless you manually restore the factory state.
Related products
