2023 New Upgrade WiFi Extender Booster Repeater, Up to 8000sq.ft and 45+ Devices, 2.4&5GHz Dual Band Wireless Internet Repeater and Signal Amplifier for Home & Outdoor, Supports Ethernet Port
-
MARY
> 3 dayNo issues so far. I have a 1850 square foot 2 story house and its working downstairs perfectly. Initial instructions on how to hook it up are ridiculous and stupid. I get over 600 MBPS downstairs now compared to about 250 prior to using this.
-
Sven Hempel
Greater than one weekZweck erfüllt
-
PATRICIA
> 3 dayworks perfectly and so easy to set up.... now that distant spot in house is covered by wi fi. Note, wi fi a bit slower through this system. But i am still streaming videos with it so I consider it a 5 star item.
-
JOYCE
> 3 dayIt did take me awhile to figure out how to use it. It must be configured with a smartphone and not the computer and it needs a MAC address of the device who will be accessing your network via the extender. Works great - great price. I use it for extended range with IP cams.
-
BENJAMIN
> 3 dayI use in my house, because I have router in my bedroom, I putting in the living room, and now I have 100% signal on the rest of the house..
-
ALBERT
> 3 daySearched through Amazon for a product along this line and all signs pointed here. Definitely a sound product and was worth the purchase. This product has been such a lifesaver! Couldnt get best wifi in the back of the house, hooked this up and we have strong signal in a much greater range!
-
JERRY
> 3 dayWe are trying to cut back on our spending and so we lowered our data on our wireless plan. We have WiFi in our house so no data use but realized that towards the back of our house and on our back patio our WiFi was hit and miss and sometimes we would lose it so our data was then being used up. This totally fixed the problem.
-
MARGARET
> 3 dayThe set-up was quick and easy, and it does the job - the dead spot in the bedroom upstairs has been eliminated.
-
KIMBERLY
> 3 dayWork better than expected. Range is good. My house is now well cover with this extender. Easy to set up.Easy too configure. I love the lighted center so you can tell when the signal drops.
-
B. Brettschneider
04-04-2025Das Kabel tut was es soll, nicht mehr nicht weniger, ausgepackt rein in die PS3 rein in den Router fertig ! ! !
|
|
|
|
|---|---|---|
4*3 dBi External Antennas180° and 90° rotating antennas can eliminate dead area and improve your existing WiFi coverage. For better performance and stable WiFi network with speeds of up to 867Mbps, 2.4GHz has farther penetration while 5GHz has faster speed. |
Smart Signal IndicatorsSignal LED indicates wireless signal strength between WiFi extender and your existing router. After initial setup, you can move your WiFi extender to any electrical outlets by reading the color of signal LED. |
With Vent Hole & WAN / LAN PortAir vents on both sides enhance heat dissipation capacity of the WiFi extender and ensure a safe working environment. Its WAN / LAN Port allows the WiFi extender to act as a wireless adapter to turn a wired device into a wireless one. |
|
|
|
|
|---|---|---|
Repeater Mode - Wireless to WirelessAmplify the WiFi signal of the wireless router, extend the coverage of the WiFi signal, and effectively solve the problem of weak WiFi signal and WiFi dead zone. (Suitable for home, office use) |
Repeater Mode - Wireless to WiredConvert wifi signals into wired signals through network cables to meet the network requirements of wired electronic devices, such as TVs, desktop computers, etc., reduce the distance of network cables, and avoid cluttered network wiring. |
Access Point Mode- Wired to WirelessUse Ethernet cable to connect this WiFi booster range extender to any Internet enabled Ethernet port in your room or Ethernet port of existing router, you can create a new dual band wireless network. Excellent for using at home or when travelling in hotel rooms. |
Reminder:
- The working status of the repeater can refer to its smart indicator light.
- WiFi signal booster is only limited to increase the coverage of the wireless signal, but not to increase the speed of the network.
- When the repeater expands the signal, it does not need to plug in the network cable. It can receive the signal of the router directly by plugging it into the socket, and transmit the wireless signal.
- When the repeater is unplugged or powered off after the setting is completed, it does not need to be reset. The original configuration information has been saved, unless you manually restore the factory state.
