2023 New Upgrade WiFi Extender Booster Repeater, Up to 8000sq.ft and 45+ Devices, 2.4&5GHz Dual Band Wireless Internet Repeater and Signal Amplifier for Home & Outdoor, Supports Ethernet Port
-
BENJAMIN
> 3 dayI got this because I was getting, at most, a bar or WiFi in our dorm. After a ten minute installation, its now at full bars and is faster than the WiFi in my own house!
-
KIMBERLY
> 3 dayDi It has definitely extended the range of my C6300 I have; however I have noticed unreliable connections to the dual-band SSID on my network. I probably am able to get it to connect about 90% of the time correctly. The other times I fell back to my AT&T signal in the house on our iPhones.Installation was straightforward and only took 5 minutes to get it going.
-
SANDRA
> 3 daythis wifi Repeater works great in our 5,000 foot house!!! just needed to buy 4 and not just 1.My 14 year old cud set it up in 5 min. Excellent coverage from 30 feet away
-
ALBERT
> 3 dayWorks great, Had very poor internet in the front of the house,Less than 5 minutes up and running, plug it in, turn on your l Pad or etc go to settings and follow instructions.
-
BENJAMIN
> 3 dayI needed range to extend to my backyard. This did the trick and was uber simple to installPerfect. I did not expect everything I brought, very well spent my money.
-
JOYCE
> 3 dayExcellent product. Super easy to set up, and cleared up dead zones in our house.House is about 2500 sq ft. I would highly recommend this product!!
-
ALBERT
16-11-2024Good signal strength. Great range. Simple set-up. Piced right. I have nothing but praise.Wow! This one is it! Getting great fast 5G coverage anywhere in the house.
-
JEREMY
Greater than one weekThis is a nice little feature. You can also adjust signal strength. This is useful if you only want it to cover a single room or dont want your neighbors to pick up on it. I have used several different extenders and so far this is by far the best of the bunch.
-
CHRISTINE
19-11-2024this product works quite well. No hassle connecting it to the source. signal is quite stable. the price is little bit high, but worth it.
-
REBECCA
> 3 dayI love in an inlaw unit and my direct tv and lap top kept losing WiFi this extender now gives me give bars all the time I dont have to reset any more love it
|
|
|
|
|---|---|---|
4*3 dBi External Antennas180° and 90° rotating antennas can eliminate dead area and improve your existing WiFi coverage. For better performance and stable WiFi network with speeds of up to 867Mbps, 2.4GHz has farther penetration while 5GHz has faster speed. |
Smart Signal IndicatorsSignal LED indicates wireless signal strength between WiFi extender and your existing router. After initial setup, you can move your WiFi extender to any electrical outlets by reading the color of signal LED. |
With Vent Hole & WAN / LAN PortAir vents on both sides enhance heat dissipation capacity of the WiFi extender and ensure a safe working environment. Its WAN / LAN Port allows the WiFi extender to act as a wireless adapter to turn a wired device into a wireless one. |
|
|
|
|
|---|---|---|
Repeater Mode - Wireless to WirelessAmplify the WiFi signal of the wireless router, extend the coverage of the WiFi signal, and effectively solve the problem of weak WiFi signal and WiFi dead zone. (Suitable for home, office use) |
Repeater Mode - Wireless to WiredConvert wifi signals into wired signals through network cables to meet the network requirements of wired electronic devices, such as TVs, desktop computers, etc., reduce the distance of network cables, and avoid cluttered network wiring. |
Access Point Mode- Wired to WirelessUse Ethernet cable to connect this WiFi booster range extender to any Internet enabled Ethernet port in your room or Ethernet port of existing router, you can create a new dual band wireless network. Excellent for using at home or when travelling in hotel rooms. |
Reminder:
- The working status of the repeater can refer to its smart indicator light.
- WiFi signal booster is only limited to increase the coverage of the wireless signal, but not to increase the speed of the network.
- When the repeater expands the signal, it does not need to plug in the network cable. It can receive the signal of the router directly by plugging it into the socket, and transmit the wireless signal.
- When the repeater is unplugged or powered off after the setting is completed, it does not need to be reset. The original configuration information has been saved, unless you manually restore the factory state.
