2023 New Upgrade WiFi Extender Booster Repeater, Up to 8000sq.ft and 45+ Devices, 2.4&5GHz Dual Band Wireless Internet Repeater and Signal Amplifier for Home & Outdoor, Supports Ethernet Port
-
klinhgf
21-11-2024Love this extender. It is so pretty easy to just unplug and move. All you do is plug it in when you move it and it boots up in maybe a minute and is ready to go. My house is about 3300 square feet and we own 2 of these and they are great.
-
Ignacio
> 3 dayTiene un diseño muy bueno en cuanto al enganche.
-
jing que
Greater than one weekThe product arrive on time and in good condition. The is a very inexpensive way to get more range from you WIFI router. My house is on 3 levels and this helped to increase the strength of my signal.
-
PATRICIA
> 3 dayOur Wifi signal was not reaching a tv in our basement so I purchased this to extend the signal. Set up was a breeze and it was working within 5 minutes.
-
JEREMY
> 3 dayTrivial to setup if your router supports WPS. It did get stupid once so I had to unplug it and plug it back in but thats just typical of any consumer grade networking product.
-
PATRICIA
Greater than one weekDid exactly as specified, extended our routers range by at least another 50 feet as it now reaches my shop. No slow down in speed either. Highly recommended!
-
JERRY
> 3 dayAmazing! So easy to set up. I installed this repeater about halfway between the router and the other side of the house. Not only do I have the signal getting to that side of the house, I am getting speeds that are 2-3 faster than from the old router that I had in that area.
-
Fabio Ffm
Greater than one weekWas soll man groß dazu schreiben, es ist 10m lang und funktioniert.
-
Alex
17-11-2024von Alex am 6. November 2015
-
KIMBERLY
> 3 dayI was a little apprehensive about this product at first, but this Range Extender works really well. I had an issue with receiving our Wi-Fi upstairs (Wi-Fi) located downstairs and this product solved my problem.
|
|
|
|
|---|---|---|
4*3 dBi External Antennas180° and 90° rotating antennas can eliminate dead area and improve your existing WiFi coverage. For better performance and stable WiFi network with speeds of up to 867Mbps, 2.4GHz has farther penetration while 5GHz has faster speed. |
Smart Signal IndicatorsSignal LED indicates wireless signal strength between WiFi extender and your existing router. After initial setup, you can move your WiFi extender to any electrical outlets by reading the color of signal LED. |
With Vent Hole & WAN / LAN PortAir vents on both sides enhance heat dissipation capacity of the WiFi extender and ensure a safe working environment. Its WAN / LAN Port allows the WiFi extender to act as a wireless adapter to turn a wired device into a wireless one. |
|
|
|
|
|---|---|---|
Repeater Mode - Wireless to WirelessAmplify the WiFi signal of the wireless router, extend the coverage of the WiFi signal, and effectively solve the problem of weak WiFi signal and WiFi dead zone. (Suitable for home, office use) |
Repeater Mode - Wireless to WiredConvert wifi signals into wired signals through network cables to meet the network requirements of wired electronic devices, such as TVs, desktop computers, etc., reduce the distance of network cables, and avoid cluttered network wiring. |
Access Point Mode- Wired to WirelessUse Ethernet cable to connect this WiFi booster range extender to any Internet enabled Ethernet port in your room or Ethernet port of existing router, you can create a new dual band wireless network. Excellent for using at home or when travelling in hotel rooms. |
Reminder:
- The working status of the repeater can refer to its smart indicator light.
- WiFi signal booster is only limited to increase the coverage of the wireless signal, but not to increase the speed of the network.
- When the repeater expands the signal, it does not need to plug in the network cable. It can receive the signal of the router directly by plugging it into the socket, and transmit the wireless signal.
- When the repeater is unplugged or powered off after the setting is completed, it does not need to be reset. The original configuration information has been saved, unless you manually restore the factory state.
