ABN Hollow Punch Kit Leather Punches Tools Hole Punch Set Gasket Punch Set Gasket Cutter 3/16 to 1-3/8in (5-35mm)

The quality of these cutting tool are great. Upon arrival you will notice that every piece of hole punch has a burr or the inside along the edge. To remove the burr, I just used a rolled 1000 grit sand paper and used it as a strop to remove the burr edges, Just make sure to only sand away from the burr edge to pull the burr piece back up again or snap off. Once the burr is removed from every hole punch, you will be able to make sharp hole punches if you use the correct bottom plastic punch board and a solid base. If you don’t have a solid bottom heavy base, your hole punches may not get the correct pressure needed for a nice hole punch. I used this punch set to cut into 1/8 thick cowhide leather to make perfect sized holes. I pitched a plastic bottom punch board which feel like a plastic cutting board. For my solid base, I used a 25 all steel weight lighting plate and hit my leather with the plastic.punch board between them. It works flawlessly and the edges stay sharp longer if you remove the burr before using. Takes less than 1/2 hour to de-burr the whole set. I used a cheap rubber mallet with a wooden handle to hit the back of the punch tool. No damages done to the tool and the rubber mallet works perfectly. I rate this product as 5 Stars for quality and value, All it takes is a little de-burring and you set for a long while before sharpening.

easy to use

Bought this so that I could cut some custom carburetor gasket for a machine that is obsolete and Parts are no longer available for. it worked perfectly.

I bought this set for its variety of sizes; that was a plus. I needed to make ONE specific rubber gasket. The performance of the cutting edges was sub-par; in a 1/8 piece of rubber, I had to pound the cutter 10+ times, pretty hard, to get it to cut through. Not what I was expecting.

easy to use and love the centering spot.

it works good,wish there was one size larger,but its still good overall

I havent used them but they look like they can do the job

VERY NICE GOOD VALUE

cuts cleanly. I am happy with my purchase.

Complete garbage the cutting edge is all blurred not sure it would cut my finget