Aicevoos D2S Receptacle GFCI Socket Outlet Tester with LCD Display, for Standard 3-Wire 120V Electrical Outlets Tester

First time using it the bottom plug pulled out. I would’ve put a lot of use to this being a maintenance supervisor and having to work on 70 houses. I will not buy this item or brand again, I’ll be sticking with Klein Tools for my maintenance department.

worth the cost if you are uncertain about quality of install

Got this device to run a thorough diagnosis to all the plugs on the west wing of my house due to a tripped circuit breaker in the panel with no clear reason. With a multi-meter and great tester I took from work, each plug took me 2-3 mins and there are about 24 outlets I need to go through. This tester makes my life much easier and simpler, all I need to do is to plug in and read the results. The testing itself takes probably only 1 second or so. I was able to find a panel with two plugs with failure grounding and resolved the breaker issue with the replacement of the outlets and wires from the last panel. Not super fancy like the professional one I have, but simple easy to run the test quickly and smoothly. Highly recommended for home users.

I like that this unit will diagnose the fault in the circuit. I also like that it will cause a fault in the circuit to test the protection of the circuit. If I never encounter a problem that is diagnosed, this is a good thing! Reading the screen cannot be much easier too! I LOVE THIS UNIT! This unit covers much of what I would do manually. I have done a lot of wiring in my house as well as others and formerly in my business too. I have always elected to use my multi-meter so that I could ensure good connections (checking voltage after knowing the supply into the premises). I would check between all three connections as well as the chassis (box), especially if using conduit or metallic shielding. Using this unit makes it easier to get past the shields in the better duplex receptacles (wall plugs) and it gives me all the readings I would use. I do recommend this unit especially since it is CE certified as well!

I like this outlet tester because its very easy to read, and does give you some more information beyond the 3 lights the older style testers have. Great to keep on hand in the tool kit to test outlets.

Big

Used this recently while I was setting up some new outlets and have used it helping some friends with electrical work. It is a great way to double-check if you are doing everything correctly. Super easy to use and understand so even someone doing a DIY outlet repair or just checking through your house outlets for any faults. I wish the screen was at a bit of an angle because especially on outlets lower to the ground the viewing angles of the lcd are not great, just angeling the screen up a bit might have helped. Overall a pretty good device that I am happy with.

This is a great tester to throw into your electrical tool box. It is small and easy to use, and doesnt even require any batteries. Simply plug this into a standard 120V outlet and it will, within about 3 seconds, tell you in plain english, if the wiring is correct, and the voltage and frequency of the AC. If there is a problem the tester will tell you in words what the issue is, without having to interpret a set of lights. Additionally, you can press the leakage test button to trip (test) a ground fault detector if there is one in the circuit. This will handle up to 250V so if your socket somehow has 240V instead of 120V on it, you wont blow up the tester. PROS: * Small and lightweight * Good build quality * Extremely easy to use CONS: * Consumer quality, not a professional quality product.

This outlet tester is super simple, has a great digital display that is easy to read and its pretty compact for what it can do! Just plug it in and it will tell you if its correct or not, and the amount of voltage that is coming your way. Doesnt get any easier than that!

The meter is about 2 vac off and the hz reading always shows a steady 60hz even on a generator that was running at 64hz.