ANYCUBIC 3D Printer Resin, 405nm SLA UV-Curing Resin with High Precision and Quick Curing & Excellent Fluidity for LCD 3D Printing (Grey, 1kg)
-
Mr. Prime
> 3 dayI tied a couple bottle of this out instead off a slightly more expensive product and noticed two things. One, it’s a little more smelly. It doesn’t bother me but the smell did travel throughout the house even with an exhaust fan going and seems to linger. Secondly both bottles have a white filmy stuff floating in the resin. Even after shaking theme the white filmy stuff comes back and I noticed my printed model also showed some white filmy stuff when does printing. Not sure what the deal with that is because I didn’t have the issue with the other brand.
-
Andrew
> 3 dayThis prints perfectly almost every time I use it. My only complaints are that its stench is godawful and its brittle. I mean it will instantly stink up a room within the first 30 minutes of starting a print. The prints themselves are also extraordinarily brittle, but thats to be expected from non-abs or even non-additive mixes. My recommendation? If youre going to get this, add something with flex to it so the prints wont shatter if you look at them wrong.
-
Matt
> 3 dayThis review is for the standard grey color. I have been using this stuff ever since I got my 3d printer and after 10 or so bottles, Ill say that it works very well! Great consistency and the quality of the product is always the same, which is really important for when you are trying to dial in settings and getting used to a new printer. If you keep making it, Ill keep ordering!
-
Chad & Victoria
> 3 dayI will always pay extra for the quality that Anycubic has put into being consistent with their product.
-
Kane F.
Greater than one weekThis brand is great. I use it with my AnyCubic resin printer and get good results. No stickiness after curing or anything. I love this stuff.
-
c little
> 3 dayhas a bit of an oder
-
Katarina Tesmer
> 3 dayI’ve been going back and forth on Anycubic and Elegoo’s resins with my printers over the past two years, switching from one to the other when one seems to have a bad batch. Anycubic used to have a very nice finish but lately seems to have a light film over it. This mostly goes away after printing though the finished prints also don’t seem as nice a consistency and finish and my smaller supports failed. I purchased the grey two pack and this is is probably the worst I’ve seen it, no idea why it gets all broken up and filmy like this. Until Anycubic runs a better batch I’ll be using other brands.
-
Jesus Palacios
> 3 daySo this is going to be probably my first review on this. So so far I’ve had three bottles 1 kg to 500 mg each one has been perfect print each time! not only does it print out way better than Elegoo gray resin. I’m also going to add is literally almost $10 more affordable than what I originally always get. You guys have gotten me for life and I’m going to be staying with any cube resin from now on
-
Amelia Quinn
> 3 dayI would not buy this stuff at full price and would rather go for Elegoo any time of the day. Although this one performed much better than the Craftsman resin from anycubic, its still not the ideal resin for printing.
-
Will
> 3 dayI’ve tried a few different resins and so far this is the best, high quality and doesn’t smell too strong. A nice balance.
Precautions:
- Storage method:
- Keep away from light seals at room temperature. (Sunshine contains a lot of UV light, will solidify photosensitive resin. After testing, the light is not affected as long as it is not UV light).
- It is recommended to save at 15 ℃ -35 ℃ ambient temperature, the lower the temperature, the higher the viscosity of the resin. Sealed storage, excessive dust or moisture can affect print quality. Sunshine contains a lot of UV light, will solidify photosensitive resin.
- Usage:
- Take a full shake before use in order to have a fully mix the functional components and fully mix the color paste in the resin. Otherwise, uneven coloring of the print may occur.
- Prohibit the use of resin in places where there is a lot of sunlight.
- Wear gloves before use to avoid direct contact with the skin and keep the room ventilated.
- Inadvertent contact, as soon as possible to use a lot of water rinse. If you feel unwell, seek timely medical attention.
- Printed models need to use high-concentration alcohol to clean about 30S (recommended concentration of 95% or more, the higher the better).
- Do not pour the resin in the resin vat into the unused resin, do not leave the resin in the resin vat for a long time without use to avoid resin pollution affect the printing effect(long time without the resin can be introduced into airtight containers or sealed with plastic wrap shading save).
To ensure successful and perfect printing, please check with user guide in the link for further details.
Brand Manufacturing:
- For freedom to make through 3D printing technology
- ANYCUBIC has gathered a professional 3D R&D team
- Committed to creating a high-quality desktop 3D printer
- Was rated as the "Most Popular 3D Printer Brand"
- 3D technology brings more possibilities to life
ANYCUBIC Standard UV-Curing Resin
General resin, a top-choice for entry-level users
ANYCUBIC Standard Resin delivers balanced performance in terms of printing success rate, stickiness with print bed, model details, printing precision, hardness, resilience, smell, fluidity and ease in cleaning. This helps users quickly enter the world of resin 3D printing.
Including popular colors in the market, pure molding colors, and good late-stage coloring effect.
- Density: 1.13g/cm³
- Viscosity: 250-300mPa·s
- Molding Shrinkage: 4.5-5.5%
- Surface Hardness: 82-85D
- Flexural Strength: 45-70MPa
- Tensile Strength: 36-50MPa
- Flexural Modulus: 1000-1400MPa
|
|
|
|
|---|---|---|
High PrecisionLow shrinkage, dimensional stability when printing. The model has high precision and clear details. |
Quick CuringANYCUBIC UV resins can be rapid prototyping. It has been developed to reduce the forming time. |
Wide applicationANYCUBIC UV Resin has a wide application: Jewelry, dental, architectural model, miniature and so on. |
|
|
|
|
|
|
|
|---|---|---|---|---|---|---|
| Plant-Based Resin | Upgraded Standard Resin | Upgraded Water-Wash Resin | Upgraded ABS-Like Resin | Tough Resin | DLP Craftsman Resin | |
| Features | Plant-Based, Low Odor, Ideal for Beginners, Easy to Shape, High Rigid, High Precision | Ideal for Beginners, Strength and Toughness are More Balanced, Easy to Print | Easy to Wash, Easy to Shape, Low Odor, No Need Extra Alcohol | High Strength, Excellent Toughness, Bending resistance | Ideal for the Professional, High Toughness, High Impact Resistance, Fast Curing | More Detailed, More Exquisite and Smooth, Low Shrinkage, Lighter Lamination |
|
|
|
|
|
|
|
|---|---|---|---|---|---|---|
| Accessories Tool Kits | Mini Air Purifier | Wash and Cure Plus | Wash and Cure 2.0 | Photon M3 MAX | Photon D2 | |
| LCD Type | / | / | / | / | 13.6"" Mono LCD | Digital Light Projrction |
| Build Area | / | / | / | / | 11.7""x6.5""x11.81"" | / |
| XY Resolution | / | / | / | / | 6480 x 3600(7K) | 2560 x1440(2K) |
| Layer thickness | / | / | / | / | 0.05mm | 0.01-0.15mm |
| Z Axis Accuracy | / | / | / | / | 0.01mm | 0.01mm |
| Max Printing Speed | / | / | / | / | 60mm/h | 2.5s/layer |
| Material | / | / | / | / | 405nm UV-Resin | 405nm DLP Resin (Better) |
| Max Cure Size | / | / | / | / | / | / |
| Max Wash Size | / | / | / | / | / | / |