Apevia PRODIGY-BK Micro-ATX Gaming Case with 1 x Tempered Glass Panel, Top USB3.0/USB2.0/Audio Ports, 3 x RGB Fans, Black Frame

(1666 Reviews)

Price
$44.99

Color
Quantity
(30000 available )

Total Price
Share
95 Ratings
51
22
10
4
8
Reviews
  • Harsh shukla

    10-06-2025

    Smooth built. Came in really great. Love the product!

  • Dr. Mathilde Pollich V

    > 3 day

    Fans included are rgb but cannot connect to motherboard sync. Case itself is easy to work in, you get a good case for the priceline. Fast shipping

  • DezTechs

    > 3 day

    This is a great case for a beginner. I used it for my daughters rebuild for her computer. It has adequate room in the back of the case for cable management. I enjoyed the fact that the fans are pre-installed. I wish, though, that they were true RGB fans and I could control them with the motherboard. This is a great case for first-time Builders and more Advanced Builders alike. I will be purchasing this case and the future. Great product, great price!

  • Tyler S.

    > 3 day

    The cable management and space for the micro ATX fits nicely I had to remove some screws but that was about it the fans come plugged in together so all you have to do is hook up the power supply and RGB to the motherboard. The button however on top of my tower sticks, the button to change the RGB lights stick so it is hard to change the colors the other buttons do not stick and there is not an application to change the RGB remotely. So the button sticking is bothersome as it can only get worse with time.

  • Donkeychong

    > 3 day

    I give this case 5 stars. It is not perfect. However, everything that this case comes with for it’s price makes it a 5 star. This case certainly does not feel cheap. The metal frame is sturdy and is not flimsy in anyway. The three fans that comes with the case are not noisy. No vibrating or odd noises. Fans are setup for PSU powered. Has a front IO button to change lighting on the Stock fans. This case would have been perfect if the top side of the PSU enclosure was meshed or at least had holes. It would have had near perfect airflow with a three front Fan setup. Very happy with my build over all. It has just about the right cut outs in the right places for decent wire management. Very satisfied… check out build in the photos.

  • Glacius17

    > 3 day

    You cant beat this case for the money. Yes, the fans use really bad molex power cables, but hey, for this price, they look really good. Be warned though, this case is tough to build in because it is small - actually shorter than most micro-atx cases, making some of the connections really difficult to make. Another issue you need to be aware of is that the lights do not sync. The only way to sync the lights is to change the color at very specific times. This is annoying and difficult and you will still not get it exact. But hey, its super affordable and looks good when done.

  • Mr. Kirk Haag

    > 3 day

    Very nice little case...plenty of room for proper cable management and the RGB fans are easy to cycle through the modes on.

  • Hilario Kozey

    > 3 day

    I love this case. I used it for my first build just about a week ago, and it is super durable and well-made. The fans are fantastic and quiet, it comes pre-cable-managed, and it is gorgeous! The only complaint I could have is that the fans are Molex connectors, which you must plug directly into your power supply. That means you cant adjust the fan speed. However, if thats not a dealbreaker for you, I say, Pick this one!!

  • ivan munoz

    > 3 day

    Great fancy case. Looks fantastic

  • Christian

    > 3 day

    If you happen to build this with all the fans you think you can install, i doubt it can fit all of it. You can actually fit 3 120mm fan at the front but the maker did not advertise you can do it. There would be no room if you add more fans at the top. I had a few extra fans that I was thinking I could use 2 more 120 mm. But it would be really tight squeezing all the fans if you want to install at the top. I tried installing 1 more fan but the cpu fan is already hitting it from the top.

Prodigy Series Large BannerProdigy Series Large Banner

Apevia Prodigy RGB Micro-ATX Tower Gaming Case

Twilight RGB Fan AirflowTwilight RGB Fan Airflow

Prodigy Main ViewProdigy Main View

Prodigy 2nd Side ViewProdigy 2nd Side View

3x Quiet Illuminating Easy To Use Apevia Pre-installed RGB Fans

Play through 16 lighting modes via top I/O panel using the “LED” button. 30 total play-through options include: RGB, Breathing, Single Color, Light Off. The Apevia Prodigy comes with two quiet and illuminating RGB fans in the front and one RGB fan in the rear to deliver good airflow right out of the box and not having to worry about purchasing fans for your PC build. The RGB fans included in the case not only light up in the outer rings but also in the inner rings for vibrant RGB lighting.

Exceptional Airflow With Full Size Mesh Design & Large Size Honeycomb Layer On The Front Panel

Full size mesh design allows the Apevia Prodigy to have enhanced air circulation compared to the usual tempered glass front panel PC cases. The added touch with the large size honeycomb layer behind the full size mesh design gives the Apevia Prodigy additional flair. This case has everything you would like in an Micro-ATX case: Prioritization of airflow, spacious Micro-ATX case, quality build parts, and attractive looks. Do not be deceived thinking this case is small as the length and width is identical to the Apevia Genesis & Predator RGB Mid Tower Gaming Cases. (Only the height is shorter due to it being Micro-ATX)

Sleek Curved Design Front Panel Presents A Gaming / Sporty Appearance & Fully Removable Mesh Front Panel Allows For Easy Access To Fans & Front Panel Cleaning

The Apevia Prodigy front panel design has sleek curves on the top, bottom, and sides to finish off the look to present a gaming / sporty appearance and helps protect the mesh from getting damaged. The front panel has no cables connected to the PC to provide hassle-free front panel cleaning when necessary. (Pull from the bottom opening of the front panel to easily remove the entire mesh front panel and wash with water and wet towel).

Prodigy Top ViewProdigy Top View

Prodigy Side ViewProdigy Side View

Prodigy Water CoolingProdigy Water Cooling

Simplistic Front Panel I/O Design With Big Power Button, Easy To Access "LED" Button To Change RGB Lighting, & Removable Large Magnetic Dust Filter

The front panel design comes with a big power button, bright power and HDD LED lights, restart button, RGB switch button, one 3.0 USB port, two 2.0 USB ports, and HD audio ports (Speaker / Headphone). The large magnetic dust filter is removable to allow fast easy cleaning and reduces dust from entering inside the case.

Spacious Case Allows For A Great Experience Building & Cleaning Your PC

  • Supports standard Micro-ATX and Mini-ITX motherboards, USB3.0/USB2.0/HD Audio ports, and improved cable management
  • Supports video cards up to 350mm in length & CPU coolers up to 160mm in height
  • Drive Bay Support: 2x3.5" (hidden) / 2x2.5" (hidden)
  • 1x Full sized tinted tempered glass side panel on the left side and 1x full size metal side panel on the right
  • PSU cage is approximately 9 inches
  • Comes with screw bag and users manual to help with installation
  • Apevia Logo and case name imprinted on the side of the PC case
  • Case Dimensions: 410mm(L) x 202mm(W) x 395mm(H)

120mm Water Cooling Options In The Rear For Radiators

  • Apevia Prodigy water cooling options supports up to 120mm radiators in the rear.
  • Room for up to six 120mm fans (3x 120mm fans in the front or 2x 140mm fans in the front, 2x 120mm fans in the top, and 1x 120mm fans in the rear.

Finished PC Build By Gaming_Workstations Using The Apevia Prodigy RGB Micro-ATX Tower Gaming Case

Apevia Prodigy ShowcaseApevia Prodigy Showcase

Apevia Prodigy RGB Micro-ATX Tower Gaming Case Dimensions

Prodigy Dimensions InfographicProdigy Dimensions Infographic

Apevia Prodigy RGB Micro-ATX Tower Gaming Case Specifications

Model Name Prodigy-BK
Case Material Metal
Color BLACK (BK)
Motherboard Size Micro ATX / ITX
Window Full Sized Tinted Tempered Glass Side Panel / Full Size Mesh Front Panel
Drive Space 2x3.5" (Hidden) / 2x2.5" (Hidden)
Motherboard Size Up to 9.6" x 9.6"
Expansion Slots 4
Front Panel Buttons Power / Restart / Fan LED Switch
Front Access Ports 1 x USB 3.0, 2 x USB 2.0, 2 x HD Audio
Cooling Fan Space Up to 6 x case fans: 3 x 120mm RGB fan (2 x 120mm RGB fans included) - front / 2 x 120mm fan - top (optional) / 1 x 120mm RGB fan - rear (included)
Video Card Length Up to 350mm
CPU Cooler Height Up to 6.25"
Product Weight 13 lbs
Product Dimensions (DxWxH) 16" x 8" x 15.5"

Related products

Shop
( 2248 Reviews )
Top Selling Products