Apevia PRODIGY-BK Micro-ATX Gaming Case with 1 x Tempered Glass Panel, Top USB3.0/USB2.0/Audio Ports, 3 x RGB Fans, Black Frame
-
A. SF.
> 3 dayI dont understand how all reviewers insert their GPUs in this case? I tried 2 same cases (1 replacement from Amazon) and two different Mini-ITX motherboards. Also two different GPUs - ASUS 2070 Super and EVGA 3090. The problem is the same, the GPU does not align with the slot, so you cant plug in any HDMI or DisplayPort cables. See the image attached.
-
Santiago Areiza
Greater than one weekperfect and cheap did everything i needed it to and everything fit nicely is spacious and looks nice
-
David M. Lewis
> 3 dayIts a cheap case, so its hard to criticize it. I will only state the facts as I experienced it and leave the judgement up to you. The quality of the case is fine. Everything lines up. The metal thickness is what you would expect at this lower price range. There is plenty of holes for cable management. The cables for the panel are long enough to reach any motherboard. The glass is real. The power supply shares a lower compartment with the 3.5 bays (all internal). What you need to understand before you buy: - The fans are fairly loud. So, expect that. They are not blaring, but about the level of a desk fan. - The RGB is fully not programmable. There is a button on the case that gives you preset options only. Static colors or rainbow effect. Thats it. - It comes with a magnetic filter on the top, but its kind of pointless because dust is going to get in it at so many other places, most notably at the top above the front fans. There is no solid back-plate behind those fans. So, if you are okay with the loud fans, limited RGB, and poor dust seal, its a good deal.
-
Steven H
> 3 dayIt was exactly what my son wanted, did not disappoint.
-
Margaret H
> 3 dayHappy with purchase
-
DezTechs
> 3 dayThis is a great case for a beginner. I used it for my daughters rebuild for her computer. It has adequate room in the back of the case for cable management. I enjoyed the fact that the fans are pre-installed. I wish, though, that they were true RGB fans and I could control them with the motherboard. This is a great case for first-time Builders and more Advanced Builders alike. I will be purchasing this case and the future. Great product, great price!
-
dallas
> 3 dayPost virus, the price of this versus what it brings is amazing! Alot of room, back side as well, argb, amazing airflow. Well done
-
Nolan
> 3 dayThis was a very good case
-
Kyte
> 3 dayThe 4 pin molex connector came with the 3rd pin snapped off.
-
CatBrisket
> 3 dayLiked- Well, my kid likes pink. Dislike- Almost all of it. I know this is a value branded case, so Im not comparing it to my $240 case. So the first thing that went was the case fans. Not a fan of the molex. Which is upsetting because for the 70-80 bucks this case costs either include some 3pin (at minimum) fans, only offer 2 or just dont include them. Another thing is the inability to provide for different PSU configurations...just one. Routing wires in this thing is as to be expected, not so much fun (had to cut the case for some things). But hey, my kid likes pink and well, thats a very small market
Apevia Prodigy RGB Micro-ATX Tower Gaming Case
|
|
|
|
|---|---|---|
3x Quiet Illuminating Easy To Use Apevia Pre-installed RGB FansPlay through 16 lighting modes via top I/O panel using the “LED” button. 30 total play-through options include: RGB, Breathing, Single Color, Light Off. The Apevia Prodigy comes with two quiet and illuminating RGB fans in the front and one RGB fan in the rear to deliver good airflow right out of the box and not having to worry about purchasing fans for your PC build. The RGB fans included in the case not only light up in the outer rings but also in the inner rings for vibrant RGB lighting. |
Exceptional Airflow With Full Size Mesh Design & Large Size Honeycomb Layer On The Front PanelFull size mesh design allows the Apevia Prodigy to have enhanced air circulation compared to the usual tempered glass front panel PC cases. The added touch with the large size honeycomb layer behind the full size mesh design gives the Apevia Prodigy additional flair. This case has everything you would like in an Micro-ATX case: Prioritization of airflow, spacious Micro-ATX case, quality build parts, and attractive looks. Do not be deceived thinking this case is small as the length and width is identical to the Apevia Genesis & Predator RGB Mid Tower Gaming Cases. (Only the height is shorter due to it being Micro-ATX) |
Sleek Curved Design Front Panel Presents A Gaming / Sporty Appearance & Fully Removable Mesh Front Panel Allows For Easy Access To Fans & Front Panel CleaningThe Apevia Prodigy front panel design has sleek curves on the top, bottom, and sides to finish off the look to present a gaming / sporty appearance and helps protect the mesh from getting damaged. The front panel has no cables connected to the PC to provide hassle-free front panel cleaning when necessary. (Pull from the bottom opening of the front panel to easily remove the entire mesh front panel and wash with water and wet towel). |
|
|
|
|
|---|---|---|
Simplistic Front Panel I/O Design With Big Power Button, Easy To Access "LED" Button To Change RGB Lighting, & Removable Large Magnetic Dust FilterThe front panel design comes with a big power button, bright power and HDD LED lights, restart button, RGB switch button, one 3.0 USB port, two 2.0 USB ports, and HD audio ports (Speaker / Headphone). The large magnetic dust filter is removable to allow fast easy cleaning and reduces dust from entering inside the case. |
Spacious Case Allows For A Great Experience Building & Cleaning Your PC
|
120mm Water Cooling Options In The Rear For Radiators
|
Finished PC Build By Gaming_Workstations Using The Apevia Prodigy RGB Micro-ATX Tower Gaming Case
Apevia Prodigy RGB Micro-ATX Tower Gaming Case Dimensions
