Apevia PRODIGY-BK Micro-ATX Gaming Case with 1 x Tempered Glass Panel, Top USB3.0/USB2.0/Audio Ports, 3 x RGB Fans, Black Frame

(1666 Reviews)

Price
$44.99

Color
Quantity
(30000 available )

Total Price
Share
95 Ratings
51
22
10
4
8
Reviews
  • Zaccc S.

    Greater than one week

    IF THIS IS YOUR FIRST BUILD, DO NOT BUY THIS CASE! Pros: Its cheap, and looks pretty cool. Cons: Little room for cable management. Included fans are molex and are VERY LOUD, so you cant adjust them (easily). The audio/mic inputs on the front IO are 3 pin connection, so a normal gaming headset will only work as audio, and WILL NOT READ MIC (without a 4-3 pin splitter). All the pre-set screws are so tight that you will need more than a screwdriver to get them out. Not all the stand offs came inserted and they are EXTREMELY HARD to get seated properly. Alot of the included screws were damaged on the threads, and were unusable.

  • Jose Daria

    > 3 day

    Great case for budget and micro-ATX builds. Higher build quality than I expected, and the included fans are great.

  • JayGalaticaYT

    > 3 day

    Nice lil RGB, case has additional hook ups for LED strips one the same panel as the power. which is cool no need to buy extra hook ups or a special motherboard. Uhm, fans are cool, since I dont have a RGB motherboard I can only use the case for switching between the fan colors, back has a little room for cable management so your not squishing your powercord wires or anything. great case for the cost, looks pretty cool when on. got it for my niece.

  • Santiago Areiza

    05-06-2025

    perfect and cheap did everything i needed it to and everything fit nicely is spacious and looks nice

  • Dr. Darrion Koch

    > 3 day

    Great case.

  • emdiff

    > 3 day

    This is a pretty good case, in this price range it is one of the most stunning and best value cases. The cable management is not very good at all. Something you would expect to see on a case around the 40-50$ range. Also it barely fit a micro-atx motherboard so beware that it is a compact case.

  • Raydiant

    > 3 day

    Built a system from all my boneyard parts for a friend. Came out very nice. Really like the case. Only complaint is the kinda odd 3.5 hard drive install doesnt really lock in place, its an odd rubber roller on one side. Might have been able to put screw on other side to lock it, but after power supply in was too late.

  • B

    > 3 day

    Great case and the fans look great through the case. Mine has a button the falls into the case but it works (see photo). Reached out to Apevia and they suggested a way to fix it and then said it’s “normal for small inconsistencies”… I guess quality control is not a priority.

  • April F.

    10-06-2025

    it came with rgb fans and the plug ins good cable management also everything fit(motherboard) looks clean also only problem was i had to turn a fan for cable management 10/10

  • Kristin and Drew Shafer

    Greater than one week

    This is a fantastic looking tower for a gaming PC. LOVE LOVE LOVE IT.

Prodigy Series Large BannerProdigy Series Large Banner

Apevia Prodigy RGB Micro-ATX Tower Gaming Case

Twilight RGB Fan AirflowTwilight RGB Fan Airflow

Prodigy Main ViewProdigy Main View

Prodigy 2nd Side ViewProdigy 2nd Side View

3x Quiet Illuminating Easy To Use Apevia Pre-installed RGB Fans

Play through 16 lighting modes via top I/O panel using the “LED” button. 30 total play-through options include: RGB, Breathing, Single Color, Light Off. The Apevia Prodigy comes with two quiet and illuminating RGB fans in the front and one RGB fan in the rear to deliver good airflow right out of the box and not having to worry about purchasing fans for your PC build. The RGB fans included in the case not only light up in the outer rings but also in the inner rings for vibrant RGB lighting.

Exceptional Airflow With Full Size Mesh Design & Large Size Honeycomb Layer On The Front Panel

Full size mesh design allows the Apevia Prodigy to have enhanced air circulation compared to the usual tempered glass front panel PC cases. The added touch with the large size honeycomb layer behind the full size mesh design gives the Apevia Prodigy additional flair. This case has everything you would like in an Micro-ATX case: Prioritization of airflow, spacious Micro-ATX case, quality build parts, and attractive looks. Do not be deceived thinking this case is small as the length and width is identical to the Apevia Genesis & Predator RGB Mid Tower Gaming Cases. (Only the height is shorter due to it being Micro-ATX)

Sleek Curved Design Front Panel Presents A Gaming / Sporty Appearance & Fully Removable Mesh Front Panel Allows For Easy Access To Fans & Front Panel Cleaning

The Apevia Prodigy front panel design has sleek curves on the top, bottom, and sides to finish off the look to present a gaming / sporty appearance and helps protect the mesh from getting damaged. The front panel has no cables connected to the PC to provide hassle-free front panel cleaning when necessary. (Pull from the bottom opening of the front panel to easily remove the entire mesh front panel and wash with water and wet towel).

Prodigy Top ViewProdigy Top View

Prodigy Side ViewProdigy Side View

Prodigy Water CoolingProdigy Water Cooling

Simplistic Front Panel I/O Design With Big Power Button, Easy To Access "LED" Button To Change RGB Lighting, & Removable Large Magnetic Dust Filter

The front panel design comes with a big power button, bright power and HDD LED lights, restart button, RGB switch button, one 3.0 USB port, two 2.0 USB ports, and HD audio ports (Speaker / Headphone). The large magnetic dust filter is removable to allow fast easy cleaning and reduces dust from entering inside the case.

Spacious Case Allows For A Great Experience Building & Cleaning Your PC

  • Supports standard Micro-ATX and Mini-ITX motherboards, USB3.0/USB2.0/HD Audio ports, and improved cable management
  • Supports video cards up to 350mm in length & CPU coolers up to 160mm in height
  • Drive Bay Support: 2x3.5" (hidden) / 2x2.5" (hidden)
  • 1x Full sized tinted tempered glass side panel on the left side and 1x full size metal side panel on the right
  • PSU cage is approximately 9 inches
  • Comes with screw bag and users manual to help with installation
  • Apevia Logo and case name imprinted on the side of the PC case
  • Case Dimensions: 410mm(L) x 202mm(W) x 395mm(H)

120mm Water Cooling Options In The Rear For Radiators

  • Apevia Prodigy water cooling options supports up to 120mm radiators in the rear.
  • Room for up to six 120mm fans (3x 120mm fans in the front or 2x 140mm fans in the front, 2x 120mm fans in the top, and 1x 120mm fans in the rear.

Finished PC Build By Gaming_Workstations Using The Apevia Prodigy RGB Micro-ATX Tower Gaming Case

Apevia Prodigy ShowcaseApevia Prodigy Showcase

Apevia Prodigy RGB Micro-ATX Tower Gaming Case Dimensions

Prodigy Dimensions InfographicProdigy Dimensions Infographic

Apevia Prodigy RGB Micro-ATX Tower Gaming Case Specifications

Model Name Prodigy-BK
Case Material Metal
Color BLACK (BK)
Motherboard Size Micro ATX / ITX
Window Full Sized Tinted Tempered Glass Side Panel / Full Size Mesh Front Panel
Drive Space 2x3.5" (Hidden) / 2x2.5" (Hidden)
Motherboard Size Up to 9.6" x 9.6"
Expansion Slots 4
Front Panel Buttons Power / Restart / Fan LED Switch
Front Access Ports 1 x USB 3.0, 2 x USB 2.0, 2 x HD Audio
Cooling Fan Space Up to 6 x case fans: 3 x 120mm RGB fan (2 x 120mm RGB fans included) - front / 2 x 120mm fan - top (optional) / 1 x 120mm RGB fan - rear (included)
Video Card Length Up to 350mm
CPU Cooler Height Up to 6.25"
Product Weight 13 lbs
Product Dimensions (DxWxH) 16" x 8" x 15.5"

Related products

Shop
( 1839 Reviews )
Top Selling Products