ARCTIC MX-4 (4 g) - Premium Performance Thermal Paste for All Processors (CPU, GPU - PC, PS4, Xbox), Very high Thermal Conductivity, Long Durability, Safe Application, Non-Conductive, Non-capacitive
-
lks
> 3 daybon produit
-
Mr. Kian Dickens
Greater than one weekPs4
-
Ahmad
05-04-2025Bestes Produkt und zu einem super Preis
-
Kurt Edwards
> 3 dayBrought this to replace thermal paste in a deep cleaned computer, was the fastest one I could get for quick turn around but I will 100% be ordering this paste again! Easy spread and great temperatures can’t complain
-
John Clark
> 3 dayMy Ryzen 7 1700X started overheating a week ago. I had been overclocking it and it ran fine for years. The thermal paste I had put on it previously wore out. I had to reset it back to normal clock speed (3.4ghz) and the idle temperature was 60c. Gaming it was getting close to 80c. Put on this thermal paste, and now idle temps are 30c and gaming temps are 48c. Really good stuff. Easy to use and apply, no problems. Will buy again when I run out of this one.
-
Dan
> 3 dayUsed for CPUs and 3d printer hotends. Worked as it should in both scenarios.
-
Federico Monfalcon
> 3 daySe non conoscete questa pasta termica dovete esser nuovi dellambiente.
-
Dr. Kip Parker
> 3 dayAlways decent bond and cooling readings with this paste! Would always buy this over others from experience.
-
Joe
Greater than one weekWorks well and seems to transfer heat very well too. No complaints other than you couldve included a thermal paste spreader for free instead of charging people for one, come on for that price point one should be included and it seems quite petty.
-
ALED
> 3 dayNickel
|
|
|
|
|
|---|---|---|---|
High thermal conductivityThe surfaces of processor chips and cooler floors are covered with microscopic dents; ARCTIC‘s MX-4 thermal paste is composed of carbon microparticles which fill these cavities. This leads to extremely high thermal conductivity, ensuring that heat is dissipated quickly and efficiently from the CPU or GPU. With its outstanding performance, the MX-4 is not only an excellent choice for overclockers and enthusiasts, but also for other sapplications that require thermal transmission. |
Easy applicationThanks to its consistency, MX-4 is easy to apply, even for beginners. The video in the picture gallery demonstrates the application technique to avoid air pockets between processors and coolers. |
Secure usageIn contrast to pastes based on metal oxides or liquid metal, ARCTIC’s MX-4 is metal-free and not electrically conductive. This eliminates the risk of short circuiting, and eliminates the need to worry about corrosion damage to the radiator floor caused by liquid metal. |
100 % original through Authenticity CheckTo ensure that your paste is genuine, there is the ARCTIC Authenticity Check. This allows every product to be reliably verified. A counterfeit offers neither the performance nor the durability of the original ARCTIC pastes. |
Technical Specifications
Density: 2.50 g/cm³
Viscosity: 31,600 Poise
Volume Resistivity: 3.8 X 10¹³ Ω-cm
Continuous Use Temperature: -50~150 °C
Colour: Grey
|
|
|
|
|
|
|
|---|---|---|---|---|---|---|
| MX-4 | MX-4 (incl. Spatula) | MX-2 | MX-6 | MX-6 (incl. MX Cleaner) | MX Cleaner | |
| Dimensions | / | / | / | / | / | 115 x 115 mm |
| Thickness | / | / | / | / | / | / |
| Continuous Use Temperature | -50~150 ℃ | -50~150 ℃ | 0~150 ℃ | -50~150 ℃ | -50~150 ℃ | / |
| Volume Resistivity | 3.8 X 10¹³ Ω-cm | 3.8 X 10¹³ Ω-cm | 1.22 X 10¹² Ω-cm | 1.8 X 10¹² Ω-cm | 1.8 X 10¹² Ω-cm | / |
| Viscosity | 31,600 Poise | 31,600 Poise | 850 Poise | 45,000 Poise | 45,000 Poise | / |
