ARCTIC MX-4 (incl. Spatula, 4 g) - Premium Performance Thermal Paste for All Processors (CPU, GPU - PC, PS4, Xbox), Very high Thermal Conductivity, Long Durability, Safe Application, Non-Conductive
-
Kevin Lay
> 24 hourUse this if your CPU is a hotboy
-
珍鳥（chinnDori+3）
> 24 hour只のヘラじやん
-
Magie
> 24 hourIt work’s awesome
-
Omega1
> 24 hourFür nichtmal €5 gibt es hier Wärmeleitpaste und eine kleine Spachtel. Die Paste tut auch sehr gut wofür sie gemacht wurde.
-
Jason T.
> 24 hourI ran out of my previous tube of MX-4 and had recently bought 4 untested consoles from a pawn shop due to the consoles sitting in the storage shed of the shop I knew a complete tear down would be required to clean them out.
-
JR
> 24 hourUsed on a GPU, which required a fan replacement. It spread well and it appears to be doing a good job. The overall operating GPU temp was lowered from 90 to 50 degrees.
-
Luis alers
> 24 hourGood product and it works
-
Bryan B.
> 24 hourGreat product as usual. It dropped my temps 8c on a Ryzen 5 5600x with a Noctua NH-U12S cooler. Easy to apply and spreads very nicely.
-
Da Lin
> 24 hourAmazing product! Lowered my laptops GPU (GTX 1060) temperature from 90C to 69C!!! One thing not good is it does not come with a clean cloth to clean previous thermal paste, so you would have to buy something similar at another place.
-
Christopher Janes
> 24 hourI have been using Arctic MX4 for years in every repair and PC build I have done. It transfers heat to the heatsink better than factory pastes and most aftermarket while being easy to spread and clean. This paste is also non-conductive so you dont have to worry about putting too much and causing a short on any of the nearby components. Every system Ive used it on over the few years has never had an issue with heat (that wasnt related to physical damage or overclocking).
|
|
|
|
|
|---|---|---|---|
High thermal conductivityThe surfaces of processor chips and cooler floors are covered with microscopic dents; ARCTIC‘s MX-4 thermal paste is composed of carbon microparticles which fill these cavities. This leads to extremely high thermal conductivity, ensuring that heat is dissipated quickly and efficiently from the CPU or GPU. With its outstanding performance, the MX-4 is not only an excellent choice for overclockers and enthusiasts, but also for other sapplications that require thermal transmission. |
Easy applicationThanks to its consistency, MX-4 is easy to apply, even for beginners. The video in the picture gallery demonstrates the application technique to avoid air pockets between processors and coolers. |
Secure usageIn contrast to pastes based on metal oxides or liquid metal, ARCTIC’s MX-4 is metal-free and not electrically conductive. This eliminates the risk of short circuiting, and eliminates the need to worry about corrosion damage to the radiator floor caused by liquid metal. |
100 % original through Authenticity CheckTo ensure that your paste is genuine, there is the ARCTIC Authenticity Check. This allows every product to be reliably verified. A counterfeit offers neither the performance nor the durability of the original ARCTIC pastes. |
Technical Specifications
Density: 2.50 g/cm³
Viscosity: 31,600 Poise
Volume Resistivity: 3.8 X 10¹³ Ω-cm
Continuous Use Temperature: -50~150 °C
Colour: Grey
|
|
|
|
|
|
|
|---|---|---|---|---|---|---|
| MX-4 | MX-4 (incl. Spatula) | MX-2 | MX-6 | MX-6 (incl. MX Cleaner) | MX Cleaner | |
| Dimensions | / | / | / | / | / | 115 x 115 mm |
| Thickness | / | / | / | / | / | / |
| Continuous Use Temperature | -50~150 ℃ | -50~150 ℃ | 0~150 ℃ | -50~150 ℃ | -50~150 ℃ | / |
| Volume Resistivity | 3.8 X 10¹³ Ω-cm | 3.8 X 10¹³ Ω-cm | 1.22 X 10¹² Ω-cm | 1.8 X 10¹² Ω-cm | 1.8 X 10¹² Ω-cm | / |
| Viscosity | 31,600 Poise | 31,600 Poise | 850 Poise | 45,000 Poise | 45,000 Poise | / |
Related products
