ARCTIC MX-4 (incl. Spatula, 4 g) - Premium Performance Thermal Paste for All Processors (CPU, GPU - PC, PS4, Xbox), Very high Thermal Conductivity, Long Durability, Safe Application, Non-Conductive
-
Mayank
> 24 hourWorks really well IF YOU CAN APPLY correctly!
-
Rodrigo Antelo Palacios
> 24 hourBuenas temperaturas desde que lo uso
-
Seito
> 24 hourHad been more than a few years sense the last time new thermal paste was put on my CPU, after applying new paste. Put this on and my PCs performance definitely went up. to be honest surprised that nothing burnt up sense it had been over 10 years, 6 years of that was sitting relatively idle though. anyways would def recommend this for those who need to replace the thermal paste on there CPU.
-
Hulio
> 24 hourUsing it on ryzen 3 3200g with a cheap amazon heatsink, never exceeds 45c when gaming. Also use it on my switch, no problems there.
-
Rick
> 24 hourI had just purchased an RTX 3070 to go with an Ultra Wide 43 monitor with a 144mhz refresh rate, etc. As soon as I installed these two items I found that my i7-10700 cpu was getting much hotter than before. Frankly it made sense as I was overclocking the gpu and trying to drive more pixels so extra heat from the gpu rising in the case to drive up the cpu temp was inevitable.
-
Noel
> 24 hourPerfect
-
Josh Riddle
> 24 hourIts the best stuff Ive ever used. I used it on a budget DEEPCOOL GAMMAXX GT BK CPU cooler, and it keeps my XEON X5690 at around 30c idle, and 55-60c gaming. It never hits over 60c. Trust me, its worth paying the extra money for this, youll thank me later.
-
Hamza Akhtar
> 24 hourRepasted both my PS3 and PS4 since they had the original paste which when opened was literally hard to the touch. Difference in temps was night and day after repasting. I was skeptical at first if I should buy the expensive one by the Kryonaut, but dont bother. This works like a charm if you paste it correctly.
-
Random Melon
> 24 hourWhat can I say it’s a good quality thermal paste.
-
Michele Valley
> 24 hourEasy to use.
|
|
|
|
|
|---|---|---|---|
High thermal conductivityThe surfaces of processor chips and cooler floors are covered with microscopic dents; ARCTIC‘s MX-4 thermal paste is composed of carbon microparticles which fill these cavities. This leads to extremely high thermal conductivity, ensuring that heat is dissipated quickly and efficiently from the CPU or GPU. With its outstanding performance, the MX-4 is not only an excellent choice for overclockers and enthusiasts, but also for other sapplications that require thermal transmission. |
Easy applicationThanks to its consistency, MX-4 is easy to apply, even for beginners. The video in the picture gallery demonstrates the application technique to avoid air pockets between processors and coolers. |
Secure usageIn contrast to pastes based on metal oxides or liquid metal, ARCTIC’s MX-4 is metal-free and not electrically conductive. This eliminates the risk of short circuiting, and eliminates the need to worry about corrosion damage to the radiator floor caused by liquid metal. |
100 % original through Authenticity CheckTo ensure that your paste is genuine, there is the ARCTIC Authenticity Check. This allows every product to be reliably verified. A counterfeit offers neither the performance nor the durability of the original ARCTIC pastes. |
Technical Specifications
Density: 2.50 g/cm³
Viscosity: 31,600 Poise
Volume Resistivity: 3.8 X 10¹³ Ω-cm
Continuous Use Temperature: -50~150 °C
Colour: Grey
|
|
|
|
|
|
|
|---|---|---|---|---|---|---|
| MX-4 | MX-4 (incl. Spatula) | MX-2 | MX-6 | MX-6 (incl. MX Cleaner) | MX Cleaner | |
| Dimensions | / | / | / | / | / | 115 x 115 mm |
| Thickness | / | / | / | / | / | / |
| Continuous Use Temperature | -50~150 ℃ | -50~150 ℃ | 0~150 ℃ | -50~150 ℃ | -50~150 ℃ | / |
| Volume Resistivity | 3.8 X 10¹³ Ω-cm | 3.8 X 10¹³ Ω-cm | 1.22 X 10¹² Ω-cm | 1.8 X 10¹² Ω-cm | 1.8 X 10¹² Ω-cm | / |
| Viscosity | 31,600 Poise | 31,600 Poise | 850 Poise | 45,000 Poise | 45,000 Poise | / |
Related products
