Cooler Master NR200P MAX SFF Small Form Factor Mini-ITX Case, Custom 280mm AIO, 850W SFX Gold PSU, Triple-slot Vertical Mount GPU, PCIe Gen4 Riser, Tempered Glass or Vented Panel (NR200P-MCNN85-SL0)

Only have 3 PCIE lines, one for CPU, and two for GPU If you want to build rtx40 graphic card, you may need to buy one more PCIE line.

This made building an SFF build simple and straightforward. Pros: It can fit 7 fans. Looks sharp in white. It fits a 240mm aio with ease. Plenty of room for a rgb/fan hub. Room for ssd/hdd in the front, or on the power supply. The pegs are brilliant. Mounting fans to the top or bottom is a breeze. Cable management in it is impressive. Easily runs a 3900xt and a massive RTX 3080 ti. Perfect for getting into SFF builds and freeing up desk space. Side radiator with fans cools the MB extremely well. RGB Lighting/fans makes the system pop. Cons: An all mesh side panel would make it even better for air flow. No top radiator mount, but the side works perfectly. Ive had great temps with this case with a 12 core processor and a big hungry gpu. Both are tweaked for maximum efficiency and core speeds. Even letting these run without limits, you can feel the hot air exhaust out the top, back, and side ventilation. Well done coolermaster. Their 850w SFF power supply is super quiet and has no issues with all the power the build pulls.

So far I only have my fans and power supply in and I love this case. Super easy so far well see when I get to the GPU.

Always been a fan of ITX builds. This is my third so far. Very impressed that it came with cables pre routed, an AIO, and a PSU. I could not find any answers online that said if this case came with a 1700 bracket. The description on Amazon said you would have to buy one. Turns out it does come with one. Worked well for my 13k i7. I also managed to squeeze a 3090 TI into this case with no issues. There was even some clearance left towards the front panel where I could route cables.

Simply put, best itx case. It runs on the larger side of itx cases yes, but what that means for you is: improved thermals, space for high end components with no compromises. I put an evga 2080ti XC Ultra , deepcool castle ex280mm aio, two slim fans under the gpu, x2 2.5 SSD’s, the 120m fan it comes with as exhaust to give you an idea of how much it fits. The case itself comes with a 92m fan on the back and a 120m for the top. A 280mm cooler is going to interfere with the small fan on the back so you will have to remove it, and if you’re using an sfx-l psu, it will interfere with a top fan at the top. (Check pics)I’m going to try with a slim fan at top to see if it fits fine. The thermals in this case are simply amazing. I’m running a 10th gen i9 with a gentle 5ghz oc and it idles at 33c, 45-55c while gaming and 86c under stress testing. Cooler master did a HECK of a job with this case honestly. I always wanted to build in an itx case but was always put off by the all the compromises. Cooler master did an impressive job with such a small case by allowing you to pack as much hardware as possible without choking the internals. Overall, the case looks beautiful. Minimalist, the white looks absolutely gorgeous.

This case is awesome, well designed, well made. This was my first computer build, and my son, who has some experience, questioned my decision to go with the NR200P given the additional challenge of working in a small space--until he saw it in person. He was so impressed, he wanted one for himself. Here is my build: Intel Core i7-12700K ASUS ROG Strix B660-I (mini-ITX) Nvidia RTX 3070FE GPU Kingston Fury Beast DDR5 16 x 2 RAM (rgb) EVGA Supernova 750W SFX power supply (note small form factor) SK Hynix Platinum P41 2 TB m.2 SSD SK Hynix Platinum P41 1 TB m.2 SSD Thermalright Silver Soul 135 white cooler Arctic P9 PWM PST 92mm fan Arctic BioniX F120 fans x 2 Chassis fan hub CPU Cooling (the really cryptic looking one) Noteworthy: The Thermalright cooler DOES fit, even with the glass side. Actually has some room to spare. The Kingston RAM has only about 2mm clearance from the cooling tower. But 2mm is enough. My fan hub sits behind the front panel, nicely hidden, because its not pretty. I routed several things behind that panel. You can also place SSDs there, but mine are both m.2, directly plugged into the MB, so that front panel was wide open for wires. I added two fans on the bottom and one at the back. Based on my review of the literature (YouTube), the best airflow with a cooling tower is to intake from the bottom and back, and exhaust thru the top. Including the fan in the center of my cooling tower, I have 6 fans in here and no problems with heat. The two stock fans are on top. I did add a magnetic filter on the back to block off the openings back there. My computer sits right next to an air filter which is right next to a chinchilla cage, with hair and dust floating everywhere. ______________________________________ Everyone talks about the challenge of routing the cables in such a small case. For me, this was the fun part and I was very happy with the outcome. Like I said, Im a first time builder, so I have no experience. Which means you can do it too. You can decide based on the pics whether you think I did a decent enough job. Just ordered another NR200P for a surprise system for my dad. Hope it goes as well as the first one, but if it doesnt, the problem wont be the case! LOVE LOVE LOVE the colors, too! I wouldve gone with pink if it hadnt been $50 more at the time of my build. Even thought about getting one now and switching everything out, but decided not to rock the boat.

White NR200P with gen3 riser and glass panel With the mesh panel, the NR200 looks sleek, modern, and clean, perfect for a home office. If you fit the glass panel you can bling out the case with LEDs, logos, and tubing to make it the center of attention, which might be desirable for gamers. The power LED is a pleasant white, not a super bright blue. The method of attachment for the side panels is far superior to thumbscrews; It has easy to use metal pins on the panels that secure them to the case. You have the option of securing the side panels to the case with screws, although if the case is in a private area that is not necessary. Cons: If you use a vertical GPU with a waterblock, the terminals of the waterblock will most likely prevent you from installing at least one of the top fans because the case doesnt have enough vertical space. There isnt much space behind the motherboard tray for routing cables that are not thin. The included 2 120mm fans started to develop a loud rattle and I had to take them out. The product pages for the CM fans never outright say sleeve bearing (they always say sealed long life bearing) but I suspect that they are sleeves and unfortunately their noise made them unbearable. I used them on the top of the case where they laid flat, which sleeve bearing fans always hate. You may be able to get more mileage out of the fans if you mount them to the side panel so that they are standing up.

Amazing case, first micro build. Couldn’t be happier with this product.

One of the best cases Ive ever built in - the snap on side covers are so convenient to get in and out and youll have no issues so long as you knoq how to build a PC properly and keep your cables neat!

Its so easy to do a build in this case. It looks amazing. Keeps the dust out really well. You can fit full-sized cards in it. Highly recommend.