darkFlash DLC29 All Mesh PC Case ATX Mid Tower Case High Cooling Performance High Compatibility Gaming Case with USB 3.0 Type-C Interface (White)

My Dark flash t20 came undamaged, on time, and as it was advertised. Specs of the system I installed in this case: Cpu: Ryzen 3600x (no OC) Gpu: Rx 5700(Oc-1850, men-930) Ram:16g Ram 3200( OC-3666 COOLING EFFICIENCY: I couldn’t be more pleased with the cooling efficiency. I did install five additional fans to take advantage of extra fan slots but I did not install an aftermarket cpu cooler. Now, what makes that impressive is I ran a full load stress test through AIDA64 today for 90secs and the CPU stayed never went over 83C. QUALITY: Case was well made with nice materials. Components were installed correctly and securely. Everything was machined nice and removed of burrs. Came with ample screws and standoffs as well as stand-off drivers which was a nice touch. RGB function properly and really add a unique look you don’t see out of most pc builds. Now as for what I would change? Nothing really, I did swap out the included fan but just so it would match the rest of mine. It would awesome if they had a removable slot for an intake fan on the bottom if something was not using the HDD and is fan crazy like myself but to be honest at this price point, you will not find a higher quality case

However, I do have a problem with it. First, this case looks incredible. Some of the reviews had me worried but personally I quite love this case now that I have it. The case can actually sync up to your motherboard, however Im not very familiar with RGB, so the capabilities might not be extensive. The case connects to the motherboard using a 3-pin RGB connector, it has another cord it can also use although I dont remember what it was, but not a 4-pin connector. Airflow doesnt seem to be an issue, and it comes with two magnetic air filters for the top radiator vent and the bottom of the case. If you were going to be pushing your PC with extensive overclocking thats where you might start to worry about airflow, but for general gaming, its completely fine. My biggest problem is that the case has tempered glass on the cable side of the case, and there doesnt seem to be a ton of room for cables. Especially since the case leaves next to no room for the power supply. Double-check the dimensions of the power supply you will be using, if it matches perfectly itll fit, however, the cords will be immediately turning outwards to the back of the case, you then need to make sure you maintain fairly low clearance below the tempered glass you will be putting on. Otherwise, you push down all the wires with glass. A small final issue is the case is kinda hard to move since its large and with glass surrounding the sides its a bit worrying to pick it up and move. But once you have it in place, its definitely the RGB experience I was looking for with plenty of room and a clean slick look.

Case looks amazing, good materials, lots of fans, RGB is amazing and everything works great. Sleek and simple look that I love. The power supply area is TIGHT, so beware. I wired everything up beforehand and then had to bend a bracket out to get it to work. Depending on your work load (or game play), it can get HOT! The front panel does choke airflow a bit, but I just remove the front panel when that happens. Fans only have 2 speeds, and this does not sync with ASUS motherboards. Comes with a top filter and bottom filter as well. Customer service was great also! Love this case!

Great Case. This was my 1st build in a very long time, so knew what to look for and did research before hand. Cable management was pretty simple. Re-routed most of it to clean it up(For my liking), but was OK right out of the box. For the price of the case, I also wish the case had the rubber grommets where you fished the wire through, it wouldve looked a lot cleaner. *Note* Only thing to watch out for is PSU size. If youre needing a large PSU make sure you look at the Specs of the size. Im currently using a 850 Evga G3 and it fits great no problems. You will also have to hook up PSU connections before you put it in due to space. All in all a Fantastic case and I am very pleased with the quality and design. Specs: AMD Thread Ripper 1900x ID-Cooling Zoom Flow 240 RGB AIO ASRock X399 Phantom Gaming 6 Corsiar Vengeance RGB Pro 16GB DDR4 3200 Nvidia Gefore GTX 1080 FE EVGA SuperNOVA 850 G3 2x NVMe Samsung 960 EVO(Raid 0)

if you really like the looks of it and are scared off because you cannot install a couple 360 rads to keep your new ryzen furnace from melting dont fret , i tested and installed 2 x 360 rads and a 240 in the top with absolutely no issues or case modding , just make sure your using 360 slim rads , 30mm thick. its really a great case , theres plenty of room in it .im replacing the tempered glass with acrylic panels and wioll be tinting them red , that was my plan from the start , i think it will be a nice little mod. also here is a very easy simple case mod to almost double airflow intake on the front panel , the stand offs for the glass panels are motherboard stand offs , you can buy these in much longer lengths and in blaack as well see pics .

Im an avid gamer and streamer and this is the ultimate jackpot for my custom PC. The case is BEAUTIFUL and there are SO MANY different color combinations / patterns to choose from. You just click one button at the top of the pc and it scrolls through the different options. There are also SO MANY fans that it comes with - its almost overkill how many fans there are and how good sized they are. You DO NOT need any liquid cooling as the fans are sufficient. The fans are also very quiet!

Really really good case made it video review should be up in 48 hours stop beating around the bush and get this case because I beat around the bush for about 2 months with this case until I finally said forget it and got it and Im glad I did Edit: it does have a lack of dust filters in front thats why i gave it four stars

Super strong airflow, extremely sleek look with the nice glass, beyond amazing almost impossible like colors and different color macros that make you just want to stare for hours. Im absolutely blown away how this only cost me $130... Ive been building computers for 10 years and nothing even comes close to how amazing this case is! This is easily a $300-$500 case in my opinion. Im amazed its literally sold for nothing. The fans for this cost $100 for similar ones!!! Get this one you wont be disappointed. Im so happy right now.

This is a nice looking case with nice rgb fans. The case is skinnier than most so beefy guys may not fit in the case properly. The biggest problem is installing the power supply. There is a very small space for the psu I had to plug in all my modular cables in before forcing in my psu which may have caused some damage to the psu. The top magnetic filter is very weak and can come off very easier compared to the ones on other cases. If you plan on buying the case try to get the smallest psu that is comparable for your system.

pros: great looking case easy fan control very quite and the remote is a great upgrade. And the Lights are mesmerizing. my MSI Meg z390 Ace fit well with a gtx 1070 FE . Cons: I will admit that I was pretty ambitious using a Corsair 150i pro {360mm) huge radiator. I was able to get it to fit but took quite a bit of time to figure out the best placement. Wire management was OK not great. DO NOT USE ANY POWER SUPPLIES which are FULLY MODULAR.There is absolutely no room what so ever for the harnesses because the dual HDD bays are in the way. after that I had to find a different case with better fitment of the components i had purchased. I am keeping the case and will probably build a less ambitious machine for my son a little later.