Ecotex® Screen Printing Emulsion Remover (Pint - 16oz.) - Photo Emulsion Cleaner on Screen Printing Screens - Silk Screen Photopolymer Emulsion Stencil Remover - Easy to Use Screen Printing Supplies
-
Malcolm Lacey
> 3 dayGreat
-
Vitaliy
Greater than one weekI dont know why there are so many bad reviews. For mine it worked great. It probably depends what type of emulsion you use.
-
Bambi creek
> 3 dayThis made really quick work of 7 screens that I inherited! You really need to make sure that you work very quickly though. The instructions say not to let the spray sit for more then 60 seconds or the emulsion will fuse to the screen: but I say work more quickly then that even. Quickly spray front and back and then use the wide spray on your pressure washer to get the solvent off (and most comes off with those first few swipes) then you can switch to the more concentrated strong stream to get everything else off. The photo shows what happens when you take your time. The one on top is how most of them turned out, the one on bottom is what happened when my dad distracted me by laying into his car horn behind me in the driveway. Didnt distract me too long, but long enough that the stuff on the bottom would not come off at point blank range with the highest pressure setting and more sprays of the solvent. Thankfully its fixable! Ill just use that screen for a smaller design and put new emulsion over it. Overall highly reccomend!
-
gaby
> 3 dayexcelente
-
Daughter_Moon
> 3 dayNow this content is perfect!! I utilized it to remove the emulsion from my screens and am quite satisfied with it!
-
Lapatra
12-06-2025Cleans well. Great price.
-
a_deleon
06-06-2025works great on their emulsion. I spray and brush it shortly after spraying and it cleans off well.
-
Robert Turner
> 3 dayI was a bit hesitant because of some of the negative reviews, but price is great and some of their other products work well for me, so I gave it a shot. 1st try on a screen that had been used, washed and sun dried several times. Did not work - but then neither did the speedball remover I’m trying to replace. Emailed their customer service. They were quick to respond and helpful. Then tried it on screens as I would normally use the remover: burn a screen, not liking the results and wanting a second go, or some one off projects...the remover worked quite well and was very easy Work to reclaim the screens. Saving a fair amount of coin Compared to other removers and will definitely reorder!
-
James Mcgee
> 3 dayEcotex has been a good product at a good price.
-
Hannah Lancaster
Greater than one weekDid the trick! Was really impressed.
|
|
|
|
|
|---|---|---|---|
Breaks Down Any EmulsionEcotex Industrial Emulsion Remover is a powerful emulsion stripper. Reclaim screens in seconds with ease. |
Drain SafeFormulated with you and the environment in mind Ecotex Emulsion Remover is drain safe. However, we always recommend checking with your cities current regulations. |
Safe on All Mesh TypesEcotex Industrial Emulsion Remover safely removes all types of photopolymer, diazo, and capillary film emulsions without etching. |
Ready to UseEcotex Emulsion Remover is ready to use straight from the container for tough stencils or may be diluted 1:4 with water for removing weaker stencils. |
|
|
|
|
|
|---|---|---|---|
Made in USAAll emulsions, chemicals, and inks are proudly manufactured in the USA. Support the American economy and families when you purchase from Screen Print Direct. |
No RiskWe stand behind our products, not happy? Simply send it back. See our return policy for more details. |
SupportWe understand that screen printing isn"t easy, especially if you are just starting out. Lucky for you our dedicated support team is here to help you! Send us a message if you are experiencing any issues using our products. |
Our MissionScreen Print Direct promises high quality products at revolutionary prices. We have cut the middle man out of the equation and offer superior products straight from the manufacturer. We will continue to innovate and only produce the best products at the best prices. |
How To Use Ecotex Emulsion Remover
|
|
|
|
|---|---|---|
Card Away Excess Ink1. Card away all excess ink from the screen and return ink to the container. DISCLAIMER: If using water-based ink kindly dispose of the ink if it is dried up and not usable. |
Apply to Screen2. Apply emulsion remover to both sides of a wet screen with a sponge, pad, spray bottle, or pneumatic pump system. a. Then, leave the product on for 15-30 seconds. DISCLAIMER: If left on longer than the recommended time emulsion can lock permanently on the screen. |
Thoroughly Rinse3. Thoroughly rinse screen with high-pressure water, starting at the bottom, making sure to remove all emulsion and residue. |
|
|
|
|
|
|
|
|---|---|---|---|---|---|---|
| Ecotex Plastisol Screen Wash | Ecotex Plastisol Press Wash | Ecotex Water-based Press Wash | Liquid Haze | Ecotex PWR Emulsion | Ecotex Emulsion Scoop Coater | |
| For use with | Ink cleaner formulated to quickly and safely remove plastisol and UV inks. | Ink cleaner formulated to quickly remove plastisol and UV inks on the press, ideal for color changes. | Ink cleaner formulated to quickly remove water-based inks on the press or in the sink. | Liquid haze removers stains and degreases in one simply step. Gel like consistency makes it easy to apply to screen. | PWR is a ready-to-use emulsion that is ultra-fast exposing and highly durable. | Ecotex Scoop Coater features a dual sided coating edge for use on all mesh counts. |