EPAX nFEP Film Sheet 200 x 140mm Thickness 0.125mm for E6/X1 and Other 5.5/6 inch UV Resin 3D Printers, Pack of 3 Films

I was super excited to get a Sonic Mini 4K printer, but then incredibly disappointed by failed print after failed print which wasted many hours of my life. I sanded the build plate with 80 grit sandpaper each time and cleaned and lubricated the NEP film each time, but still the prints failed to stick to the build plate and stuck to the NEP instead. Only after increasing the exposure time way up did prints stick to the build plate. But of course then the prints were overcured and the detail destroyed. I finally gave up and tried this Epax NFEP film and, bingo! Successful prints the first try. Recommend. I ordered the 3 pack and I did receive 3 pieces.

Description clearly state Package of 3 films. After opening the triple wrapped package there is only ONE FILM. I would recommend opening all your packages and confirming that you received what you paid for.

A must, get it.

I have had nothing but headaches from this product. I was getting respectable success before trying this stuff. A weeks worth of failed prints trying to get this nfep to work. I tried calibrating every variable I could, heated my enclosure, re leveled the bed with different paper thicknesses, slower lift speed, longer exposures. A failed print from this film broke one of my lcds. This film seems to make light pollution worse, and seems to make an even worse popping sound from the normal elagoo brand fep. I have two longer orange 30s, if any printing wizards out there have any advice for me I would really like to get some of the results other people are talking about. But so far this stuff has set me back.

After losing a few prints to resin sticking to the fep I switched to the Epax nonfep. This stuff works as advertised. I havent had a single failure due to the resin sticking since switching. It is also easier to install, it is more flexible than the standard fep. The fact that prints dont stick to it should increase its useful life also. Great product.

My husband uses them to go around his feeding tube. He was having trouble with gauze sticking in the hole of the tube these are smooth and don’t stick!!

I bought a 3 pack of this earlier this year just to have on hand. I went to change out a vats nfep with the new stock but upon completion I held it up to the light and noticed 3 or 4 dark specks. They appear to be embedded in it as they dont reflect light on either side. Annoyed I went to change that one out with another one from the pack, unfortunately they all had the same flaws. $24 down the toilet. I never had this problem before with fep from various manufactures / resellers.

Great solution for my Phrozen Mini. Easy to install and trim with a sharp knife.

since using this Nfep... only have very few minor prints. havnt change fep since. much improve from regular fep film

Got this for my Mars Pro and I dont get FEP stick issues anymore. The only time I get minis stuck to this is when I mess up the supports.