Gorilla Waterproof Caulk & Seal 100% Silicone Sealant, 10oz Cartridge, Clear (Pack of 1)

(0 Reviews)

Price
$12.31

Style
Quantity
(40000 available )

Total Price
Share
99 Ratings
64
19
8
7
1
Reviews
  • Song Dong

    > 24 hour

    It worked well as it shall.

  • waltnumber8

    > 24 hour

    I’ve used a ton of silicone caulk over the years to caulk around kitchen countertops or fill holes in kayaks/ etc. this stuff works.. but it didn’t seem to flow well through my caulk gun. I had to ream a coat hanger in the nozzle b4 each use. Otherwise it seemed quick to gunk up in tube. (Yes I use an old nail or screw to keep the air out).

  • H2

    > 24 hour

    Went down easily using a caulk gun. I would have loved some instruction on how to get it off my finger after I made the mistake of smoothing it without a glove. Just in case you need to get it off, soap, mouthwash, alcohol and nail polish remover weren’t successful. I think I finally got it off by pouring a little bourbon on it. Desperate measures...

  • D. Anderson

    > 24 hour

    Be aware that the photos for this product are misleading. Some of the photos show the Silicone in a squeezable tube and others in the cartridge. With the cartridge you need a caulking gun. My mistake but I paid more attention to the photos and thought I was getting the TUBE that was smaller and easier to handle for a small job. Totally my fault, but the photos are deceptive. Know what you are buying. I havent used it yet, Im sure its a great product.

  • melisa

    > 24 hour

    I use it for my faux foods and it really made my donut look real!!!!!! Will definitely be buying more when I need it

  • Ramblincowboy

    > 24 hour

    Works great!

  • Frank Ward

    > 24 hour

    GREAT DEAL!!!Exactly as described.

  • Mojos Beads

    > 24 hour

    The caulking in my shower started to become moldy, so I removed that old caulk and re-caulked it with a DAP brand caulk that I bought at a local store. The color matched (almond) however just a few days after laying it down I noticed spots of molding. After further investigation I discovered that the product was disintegrating away from water hitting it! I just dont understand how that could happen to caulk. Anyway after researching what a very good brand of caulk would it be, it led me to this product. I found it very easy to use, and it does dry fast. I would say that it does take longer than 30 minutes, but it does not take anywhere near 24 hours. As far as the chemical smell, yes there is an odor however it is really not that bad at all. It will linger in the bathroom for just a few hours and then go away. The product is more of a silicone type seal, and it has been doing great. Water beads right off of it. I would recommend this caulk to anyone looking to fix their bathroom seals.

  • Ms. D.

    > 24 hour

    Really disappointing. I had to fight really hard to get it out of the container and then it exploded. Not sure if it’s even going to work, but I certainly tried.

  • John M.

    > 24 hour

    Works well

Gorilla Waterproof Caulk & Seal 100% Silicone Sealant* seals out water, air and moisture and is great for kitchen, bath, window, doors, auto, marine plumbing, gutters and more! Ready for water exposure in just 30 minutes, this waterproof sealant is & resistant. This clear silicone sealant won"t yellow, shrink or crack over time!

**Note: Do not use on wet, damp, frozen or contaminated surfaces. Not paintable. Not for use in underwater applications, aquariums, on brick, masonry, cementitious materials or on metals sensitive to corrosion including brass & galvanized metals. For general auto/marine applications – not for under hood or direct gasoline exposure.

TO OPEN:
Cut nozzle at 45° angle to desired bead size. Puncture inner foil seal.

TO USE:
All surfaces should be clean and free of dirt, grease, oil and old sealant. For gaps larger than ½ inch use backer rod. Best if applied above 40°F (5°C).
1) Insert into cartridge gun.
2) Apply sealant, pushing bead ahead of nozzle.
3) Smooth bead immediately after application, before skin forms.

30 MINUTE RAIN/SHOWER READY: Can be exposed to water in as little as 30 minutes based on a 3/16” bead at 70°F (21°C) and 50% humidity. Otherwise, wait 24 hrs.

STORAGE: Replace cap tightly to prevent material from curing. Store in cool, dry location. To re-use nozzle, remove sealant from nozzle once cured.

CLEAN-UP: Wipe wet sealant off project immediately with a dry cloth. Isopropyl alcohol may be used according to solvent manufacturer’s instructions.

Click on the Gorilla link at the top of the page to see more Gorilla Tough products.

Related products

Shop
( 905 Reviews )
Top Selling Products