Hangman Products S-2040A No Stud TV Hanger Mount TVs up to 55-Inch

(757 Reviews)

Price
$16.81

Quantity
(10000 available )

Total Price
Share
148 Ratings
141
7
0
0
0
Reviews
  • Nathan D.

    > 3 day

    Its worth noting that my use of these is a bit unique. I have a 65 Toshiba TV, and I enjoy it very much. My apartment wouldnt allow me to drill or tap into the studs in my living room wall so I was unable to use a standard wall mount hanger for my TV. So heres what I did... I actually reached out to Hangman Products directly, and let me start by saying that they were very friendly to communicate with. Since these are meant for 55 TVs and smaller, they do not work particularly well with anything larger than that. The reason for this is that TVs larger than 55 typically have the inputs and outputs facing outward from the back of the TV rather than downward. So for these, the cable clearance was a concern, but also the weight. Each of these is rated to hold 80 lbs. My TV is approximately 75 pounds or so. This is pushing the limit a bit, and made me a bit uncomfortable. But what about using two of them on the same TV? I can confirm that it works! Hangman Products stated the design limitations and weight concerns above when I spoke with them, but in theory, if the hangers could be spaced apart well enough that each was holding equal, or close to equal load, then it should have no problem holding. I risked my nice expensive TV to feed my curiosity, and the cat is still alive! I made sure to verify my measurements exactly multiple times and checked my math, and had my math checked, and mounted these into the walls with their suspiciously tiny picture nails. Trust me, when you start hammering these things in, you start getting quite concerned and thinking These puny things that I can bend between my fingers are going to hold up my giant TV???. Somehow, through science, physics, witchcraft, black magic, or some previously undisclosed alien technology, they do so just fine. Mine has been hanging on the wall since December, 2016, and it hasnt budged even slightly. To solve the cord problem, which is a real issue, I ran my HDMI cables into right angle adapters and filled up every input on the TV. Then I ran those cables into a project box that I built and used HDMI, TOSLINK, and other wall plates, and mounted it underneath the TV. So if I ever need to switch inputs, its right there under the TV, which has turned out to be easier than it was when the TV was sitting on the top of the entertainment center. OVERALL: Great product. Ingenius. Im a believer, they work. Its a tough breath to take before you let your hard earned money rest on these seemingly puny things, but breathe easy, these wont let you down... UPDATE (3/12/2020): Glad that this was helpful to so many folks. Id like to update that we have since moved from our apartment and into a new home. While uninstalling these mounts, the screws had to really be pried loose to come off, they hadnt moved a millimeter and were solidly still in the wall. I also decided to reuse them in our master bedroom in the new house for the big TV using the same technique described in my original review, and that TV has been hanging on the reinstall of the same mounts since 2017 and its still firmly in place. These really are awesome!

  • Stephen

    > 3 day

    The hangman is perfect and its 5 star rating is well deserved. If you are a renter or home owner that is looking for a non obtrusive way to mount your tv then look no further. Having read reviews prior to purchase, I have a few things for you to consider. 1.) Make sure this works with your TV. The odds are it does (I have a samsung 4K tv) 2.) When mounting, make sure to forcably “push in” the bubble level into the bracket. It will snap in making installation much easier. 3.) ENSURE THAT THE MOUNT ON YOUR TV INTERLOCKS WITH THE MOUNT ON THE WALL. When I first installed it, I thought I had interlocked them. However, upon further inspection, I found out that the two were merely balancing on one another 4.) Keep in mind that there is little to no room for cables in between the wall and tv (it is very flush to the wall). This was not a problem for me. This product is cheap enough to give it a shot. I am very happy with my purchase.

  • Websissy

    > 3 day

    We wanted something light weight and easy to have our TV out when stationary and take off while moving our 5th wheel. Easy to install - liked that it had several small nails to secure it and spread the TV weight across the bar. Also appreciated the leveling tube. Glad I found this - perfect for what we needed. Now to figure out how to hide the cord and cable.

  • Ty Givens

    Greater than one week

    This works really well. Ive failed to hang several shelves but i was able to get this hung and set up in about 20 minutes. 2 notes are be careful with the nails, they can bend if youre not careful, luciliy theres should be a few extras if they bend too much. Note 2 is check that your house is actually level. My tv is level, but my house isnt so it looks crooked.

  • Addaly Diaz

    > 3 day

    Was lowkey scared to try this and hang my tv on, especially with the small screws they provided but it’s definitely hanging in there!

  • bckm44

    > 3 day

    I never leave reviews on Amazon, good or bad, unless its exceptionally so in either direction. I absolutely love this product. I was having an unbelievably hard time trying to mount an older, heavyish 46 plasma tv with a standard stud tv wall mount so out of frustration I thought Id give this a try. Its amazingly easy to install and with the attached level its easy to install it perfectly straight. once youve got the wall mount nailed in its a breeze hooking the tv side unit onto it. I was concerned that without any screws in the studs that my tv might be too heavy, but this mount has not issues whatsoever holding my heavier plasma tv on the wall. I bought 2 more to mount my other tvs in the guest room and office.

  • Divers

    > 3 day

    I loved this. It was very easy to put together. My only gripe was is was difficult to slide it in to the bracket that holds it. It could be a little bigger but I had someone help me and we got it on. I would highly recommend this.

  • MDP

    > 3 day

    Love this product. Exactly what we needed. We are using it in plaster walls and it works brilliantly. My engineer husband was impressed with the design. I wish hangman had more products (shelves, nails for curtain rods) for hanging with this design. We wanted a Frame tv but it’s not in the budget yet and this is doing well as a stand-in. Had a lot of difficulty finding reviews or products that anyone had used in plaster, so I want to say—this works in plaster!

  • T Maultsby

    > 3 day

    I liked that this piece was simple. I was a little apprehensive about its ability to hold up the television!!! It was such a simple product it was too good to be true. I did read the directions and did it by myself but I do recommend having someone to grab for the quick placement of the television on the bars. The wall bar is sturdy AF to my astonishment and will be getting more for other televisions to hang in my home. Great product, simple instructions and I hung the 50 inch TV by myself.

  • Malvina Fay DVM

    > 3 day

    It came with everything I could have ever needed to assemble. Except a hammer of course. But the screws fit my tv perfectly. It took less than 15 mins to get my tv mounted. I’m thinking about getting one for the living room as well

The Hangman No Stud TV Hanger will hang any LED thin screen TV in less time than it takes to unpack it. Consists of two interlocking aircraft-grade aluminum brackets. One bracket attaches to the back of the TV and the other bracket installs on the wall. Once installed a 1" clearance from the wall provides easy access and space for cords and cables. The wall track has a foam backing to minimize wall damage. Once removed all that is left behind are tiny pinholes that can be easily covered up. Comes in Black Anodize Finish. Patented & UL Rated.

From the Manufacturer

The Hangman No Stud TV Hanger will hang any LED thin screen TV in less time than it takes to unpack it. Consists of two interlocking aircraft-grade aluminum brackets. One bracket attaches to the back of the TV and the other bracket installs on the wall. Once installed a 1" clearance from the wall provides easy access and space for cords and cables. The wall track has a foam backing to minimize wall damage. Once removed all that is left behind are tiny pinholes that can be easily covered up. Comes in Black Anodize Finish. Patented & UL Rated.

Related products

Shop
( 1986 Reviews )
Top Selling Products