Hangman Products S-2040A No Stud TV Hanger Mount TVs up to 55-Inch

(757 Reviews)

Price
$16.81

Quantity
(10000 available )

Total Price
Share
148 Ratings
141
7
0
0
0
Reviews
  • Alo

    > 3 day

    Its great. This is my third one. The first one I got from the Hangman website and my sister ordered one from Amazon a few months later and it arrived fine. Then I ordered another one from Amazon but it came defective. The holes were not spaced evenly like the other two, the middle hole was not in the middle, and the back foam was damaged. I ordered a replacement and that one came fine. Just make sure you dont receive a defective one because your TV kind of depends on it. Returning it was annoying but the replacement came quickly.

  • Lisa

    > 3 day

    When I brought the product I was real Skeptical that it would work. This is the real deal. I put it in my 15 year old son room to mount his 50” TV. It was a surprise for him and it was easy to do and it’s not going anywhere. It’s so easy that I was able to mount it by myself and believe me I am not a handy person at all. The total time it took was 15 minutes and that included reading the directions which was straight forward and not confusing. This product is a must have for renters!!!

  • CPEkid

    > 3 day

    Where has this been all my life??? Kudos to whatever laws of physics that makes this tv mount work without wall screws anchors or studs! It was so easy to put up, I was afraid to trust it at first. It says each nail holds 10lbs. My TV weighs about 60lbs, but I used all the nails provided (at least 10 or more). It even tilts so that you can access the rear ports. If I had to come up with a con, the tv is not level against the wall as theres a slight forward tilt at the top. Thats really a non issue though. Note that if you need your mount to tilt or swivel, this is not for you.

  • Nimby5956

    > 3 day

    I was skeptical BUT it really works. It was super easy to install, its low profile which worked great for me and I have 100% confidence it will hold my TV forever. HIGHLY RECOMMEND.

  • Nathan D.

    > 3 day

    Its worth noting that my use of these is a bit unique. I have a 65 Toshiba TV, and I enjoy it very much. My apartment wouldnt allow me to drill or tap into the studs in my living room wall so I was unable to use a standard wall mount hanger for my TV. So heres what I did... I actually reached out to Hangman Products directly, and let me start by saying that they were very friendly to communicate with. Since these are meant for 55 TVs and smaller, they do not work particularly well with anything larger than that. The reason for this is that TVs larger than 55 typically have the inputs and outputs facing outward from the back of the TV rather than downward. So for these, the cable clearance was a concern, but also the weight. Each of these is rated to hold 80 lbs. My TV is approximately 75 pounds or so. This is pushing the limit a bit, and made me a bit uncomfortable. But what about using two of them on the same TV? I can confirm that it works! Hangman Products stated the design limitations and weight concerns above when I spoke with them, but in theory, if the hangers could be spaced apart well enough that each was holding equal, or close to equal load, then it should have no problem holding. I risked my nice expensive TV to feed my curiosity, and the cat is still alive! I made sure to verify my measurements exactly multiple times and checked my math, and had my math checked, and mounted these into the walls with their suspiciously tiny picture nails. Trust me, when you start hammering these things in, you start getting quite concerned and thinking These puny things that I can bend between my fingers are going to hold up my giant TV???. Somehow, through science, physics, witchcraft, black magic, or some previously undisclosed alien technology, they do so just fine. Mine has been hanging on the wall since December, 2016, and it hasnt budged even slightly. To solve the cord problem, which is a real issue, I ran my HDMI cables into right angle adapters and filled up every input on the TV. Then I ran those cables into a project box that I built and used HDMI, TOSLINK, and other wall plates, and mounted it underneath the TV. So if I ever need to switch inputs, its right there under the TV, which has turned out to be easier than it was when the TV was sitting on the top of the entertainment center. OVERALL: Great product. Ingenius. Im a believer, they work. Its a tough breath to take before you let your hard earned money rest on these seemingly puny things, but breathe easy, these wont let you down... UPDATE (3/12/2020): Glad that this was helpful to so many folks. Id like to update that we have since moved from our apartment and into a new home. While uninstalling these mounts, the screws had to really be pried loose to come off, they hadnt moved a millimeter and were solidly still in the wall. I also decided to reuse them in our master bedroom in the new house for the big TV using the same technique described in my original review, and that TV has been hanging on the reinstall of the same mounts since 2017 and its still firmly in place. These really are awesome!

  • Vijai

    > 3 day

    This is amazing! It so easy to mount and looks fab! Tv mounting gone wrong is terrible and dangerous, I’ve had a bad experience in the past. I was considering professionals to mount the tv and shell out a lot of $$ and I wanted to try this as a last resort, best decision. It’s super easy to mount, the tv looks great and it feels safe and secure! Highly recommend this for the features and the price! Just note that it’s fixed and doesn’t fit all tv sizes!

  • BASE 5_NYC

    > 3 day

    If you need to hang a TV... this is absolutely the way to do it. Couldnt be any easier & theres no need to find a stud. Takes about 5 minutes to finish the job & all you need is a hammer & phillips screwdriver. They even give you the level. Unless you have some giant 85 inch $5000 TV this is exactly what youre looking for. The only downside is if its in a high traffic area where it could be bumped or young kids can easily access it theres a chance it could slip out of the hanger, but its very secure otherwise.

  • BethGoesShopping

    Greater than one week

    They thought of everything! A template, a teeny level, it is very easy to install and I have confidence it will hold the tv up.

  • G. Alicea

    > 3 day

    I wanted a simple bracket to hang the TV in my bedroom. Did not want to deal with locating studs or putting big holes in my wall. Installation was easy and fast!

  • Saydee A.

    > 3 day

    I have held on for years thinking I’d have to hire a pro for the installation! This was BEYOND easy and fast for me to do! I have ordered 2 already and planning to order my third one for the bigger television in my living room! Thank you for this!!!!

The Hangman No Stud TV Hanger will hang any LED thin screen TV in less time than it takes to unpack it. Consists of two interlocking aircraft-grade aluminum brackets. One bracket attaches to the back of the TV and the other bracket installs on the wall. Once installed a 1" clearance from the wall provides easy access and space for cords and cables. The wall track has a foam backing to minimize wall damage. Once removed all that is left behind are tiny pinholes that can be easily covered up. Comes in Black Anodize Finish. Patented & UL Rated.

From the Manufacturer

The Hangman No Stud TV Hanger will hang any LED thin screen TV in less time than it takes to unpack it. Consists of two interlocking aircraft-grade aluminum brackets. One bracket attaches to the back of the TV and the other bracket installs on the wall. Once installed a 1" clearance from the wall provides easy access and space for cords and cables. The wall track has a foam backing to minimize wall damage. Once removed all that is left behind are tiny pinholes that can be easily covered up. Comes in Black Anodize Finish. Patented & UL Rated.

Related products

Shop
( 2494 Reviews )
Top Selling Products