HP 27-inch QHD Gaming with Tilt/Height Adjustment with AMD FreeSync Premium Technology (X27q, 2021 model)

Picked this up in a flash sale and its great for the price. It has the same panel as the Dell (pictured on the right in my photos). Very similar picture but the HP is a little bit more neutral. The HP didnt need calibrated out of the box, unlike the Dell monitor. I cant run it at its highest refresh setting, there was a bit of ghosting. Dropping it to level 3 fixed it. Otherwise it is a smooth experience. The power button is in a terrible spot, if you are right to run 2 of these or more you might want to try something else out. If the price goes down again, Ill easily pick up another to run in portrait. Overall Im happy with it for what I paid

The monitor itself is fine, the included DisplayPort cable was not working however, and it took considerable time to figure it out, it was quite a headache. The idea of packing everything back and bringing the large box back to Amazon was not too attractive, had to buy another cable by myself.

It looks worse on camera but this monitor has some pretty bad glow when the monitor is dark. This can be mitigated by turning down the brightness but doesnt solve the issue. All IPS glow so i might go back to a TN monitor.

This should be used for a computer. I bought this for my ps5 but this has a 2.0 HDMI port, so I cant use VRR.

For the price I paid of roughly 150 dollars you cant do better.

Love the monitor

Ive received six of these so far – a mix of the LIM111 (1x), LIM101 (1x), and BIM111 (4x) revisions. Both LIM revisions appear identical in all aspects that I can see, while the BIM revisions have some serious quality differences. See attached photos for a comparison (LIM on left and BIM on right). The stock color difference is not as extreme as it looks, thats just distortion on camera due to the anti-glare coating, its only roughly half as bad. LIM111/LIM101 (LG): • No flickering • Good anti-glare coating and no visible graininess • Beautiful and vibrant color • Strong and accurate whites/grays • Great viewing angles • Moderate IPS glow BIM111 (BOE): • Flickers a lot (more on that below) • Excessive anti-glare coating that causes visible graininess on the screen • Weaker color vibrancy • Weaker whites/grays • Poor viewing angles • Minimal IPS glow For those who have a mix of BIM and LIM revisions, I recommend trying out custom RGB on both – (245, 255, 255) on LIM and (255, 255, 255) on BIM. Theres still a noticeable difference, you cant get them to match without drastically hurting color accuracy on LIM, but its a decent improvement. Do not install an ICC profile on the BIM revisions unless its specifically tuned for it. 3 of the 4 BOE panels that I received flicker, including replacements from different warehouses. The flickering is like a momentary 20-30% drop in brightness, and it happens in batches of 2-3 times over the course of several seconds, generally reoccurring every 5-30 minutes. I couldnt find any settings that helped, including reducing the refresh rate and disabling adaptive sync, nor swapping the cables with a LIM panel that didnt flicker. It seems like theres possibly a flicker lottery going on here too...

Probably the best 1440p monitor you can get for the price. Comes with DP cable (No HDMI). Colors look great and I haven’t had any issues with dead pixels or backlight bleeding. Definitely should go with this if you’re balling on a budget.

The power button and all of the controls are on the back of the monitor, not even near the edge so you can sort of reach under or around to get to them. Its like someone intentionally placed them in the hardest to reach location. Im frustrated that I cant easily turn these off at night when I want to shut down or put my computer to sleep. Other than that, theyre fine. The tiny bezels mean theyre very nice side by side. They seem bright and crisp and so far Im happy but I havent played anything intense on them yet.

10/10!!!