JPUNG for iPad 5 (5th Generation) Screen Replacement A1822 A1823 9.7 2017, Only for 5th Gen Touch Digitizer, Home Button,Full Repair Kit(Video Guide)

Installation is much more difficult that their video makes it look. The glass doesnt come off as easily and tends to break and chip into many little pieces. Its quite messy. I ended up watching a 30 minute video on YouTube just to be sure. Also, even after removing the protective cover, the glass was heavily scratched across the backside. I checked and there wasnt a protective cover used on the backside nor did the vendor supplied video show that there was one to remove before completing the final step. The vendor supplies a spool of thing red adhesive tape...this too isnt mentioned in the video so I had to figure out what it was used for. My installation took quite a while so work patiently and methodically.

I replaced my broken screen last week. In the beginning it worked well. But next day, I found there was a small crack in the left corner. Then I sent email to JPUNG customer service, they replied soon: Hello, the screen may be damaged in transit, we can send you a free replacement directly. You will not need to return the screen to avoid the return process. The new screen is still covered by the warranty. Any ideas,you can tell us. Thanks for understanding! I like their attitude from customers side.

My daughter got her iPad when she was 2 years old. This is the third time i have replAced her screen and she will be turning 5 in a few months. I love this model of iPad because the LCD is not build into the glass - thus making the fix 15x cheaper. The first fix took me about 45 minutes so i could meticulously do it so i did it right. The second fix about the same This time it took me about 35 minutes total to complete, but had a few complications like dust and i had to un-install the manufacturer home button and re install it into the new screen. If you do this repair as is it wouldn’t take me longer than 25 minutes. BUT i take the extra time to disassemble the home buttons. ONLY the manufacturers button that matches your model number(unless otherwise replaced by Apple) will work with the fingerprint ID. ALL OFF PARTY BUTTONS will DISABLE this fingerprint function in the iPad. So this is an important step that is tedious and requires patience and extra glue. I bought a previous screen that had a like.. pattern to the glass? Maybe it was tempered? It was weird - this screen doesn’t have that and it is crystal clear. Shipping was PRIME - 2 day Definitely highly recommend.

Not as easy I thought it would be. Difficult to get peel-off protector from edge tape - especially near cables. Took about 90 minutes to complete. Used jell heating/cooling medical pad in microwave to heat edges. Watch a lot of videos.

Very easy to install with the tools provided in the kit. Works flawlessly! Will buy from again when kids break another screen.

This kit came with literally anything and everything that you will need and super easy to replace the old screen! And any questions and issues that I had, their customer service was great!

If it wasn’t installed I would return it!

Product came with instructions on how to disassemble everything but not reassemble, and for people who aren’t used to rewiring, this is a problem. Even after going on YouTube it still took a while to sort out. And just a heads up, just because you use a hair dryer to loosen up the screen glue doesn’t mean it will come up easily. I had small bits of cracked glass everywhere so there’s definitely no turning back and using the old screen again (see photo). When I finally had everything reassembled, the touch screen is too sensitive to even use- I click on one item and it jumps ahead by a few more (another reviewer also had this issue). A small portion of the screen doesn’t even respond to touch anymore. Do yourself a favor and just pay the extra for the pros to do it.

Good

Fixed my iPad back like new