Nabob Deals Arctic Silver 5 Thermal Cooling Compound Paste 3.5g Heatsink Paste High-Density Polysynthetic Silver with Bonus Tool (Arctic Silver with Bonus Tool)
-
Logan Allison
> 24 hourIt accomplished the job that I intended for it. I am happy with my purchase.
-
aholic
> 24 hourUsed on Xeon, Intel I7, laptop graphic chips and never ever had a problem. Clean heatsink and chip with alcohol very carefully, apply a pea size of this on center of chip. Good to go.
-
Gregory Kasper
> 24 hourI liked that the cap can be screwed back on. It took me a bit to figure out it screwed off though. Pulling didn’t work.
-
Ryan Robinson
> 24 hourIts a good product to add to the top of your processor. Not good spread on toast. DONT PUT ON TOAST!
-
Luis HI
> 24 hourOn my cpu as we speak. It does the job.
-
Jackson Notch
> 24 hourVery good
-
RKS
> 24 hourit works!
-
Adrian
> 24 hourEasy to spread, works perfect.
-
Timothy s.
> 24 hourMy go to thermal paste for a while now doesnt get much better for the price.
-
blue0231
> 24 hourWorked
Performance
3 to 12 degrees centigrade lower CPU full load core temperatures than standard thermal compounds or thermal pads when measured with a calibrated thermal diode imbedded in the CPU core.
Coverage Area: A 3.5 gram syringe contains enough compound to cover at least 15 to 25 small CPU cores, or 6 to 10 large CPU cores, or 2 to 5 heat plates. At a layer 0.003" thick, the 3.5 gram syringe will cover approximately 16 square inches
Arctic Silver Thermal Cooling Compound Paste 3.5g High-Density Polysynthetic Silver
Arctic Silver 5 does not contain any silicone. The suspension fluid is a proprietary mixture of advanced polysynthetic oils that work together to provide three distinctive functional phases. As it comes from the syringe, Arctic Silver 5"s consistency is engineered for easy application. During the CPU"s initial use, the compound thins out to enhance the filling of the microscopic valleys and ensure the best physical contact between the heatsink and the CPU core. Then the compound thickens slightly over the next 50 to 200 hours of use to its final consistency designed for long-term stability. (This should not be confused with conventional phase change pads that are pre-attached to many heatsinks. Those pads melt each time they get hot then re-solidify when they cool.
The viscosity changes that Arctic Silver 5 goes through are much more subtle and ultimately much more effective.)
|
|
|
|
|
|
|---|---|---|---|---|---|
| Arctic Silver 2 Pack + Tool | Arctic Silver + Arctic Clean & Cloth | Arctic Silver + Pad/Tool & Cloth | Arctic Silver + Tool & pad | Arctic Silver Starter Kit | |
| Package Contents | Arctic Silver x2 With Tool | Arctic Silver + Arctic Clean & Cloth | Arctic Silver + Pad/Tool & Cloth | Arctic Silver + Tool & pad | Arctic Silver + Cloth + Static Kit |
Related products
