Nabob Deals Arctic Silver 5 Thermal Cooling Compound Paste 3.5g Heatsink Paste High-Density Polysynthetic Silver with Bonus Tool (Arctic Silver with Bonus Tool)
-
Vivid Livid
> 3 dayThe product worked as expected. It went on smooth and reduced the temp of my CPU as intended. No complaints, and the little plastic spatula was a nice and very appreciated tool. Thank you!
-
MT
> 3 daySo far so good.
-
CFrost
> 3 dayWorked better than expected.
-
Abraham Zaragoza
> 3 dayNo había probado antes esta marca, sin embargo, me ha mantenido buenas temperaturas durante el uso de gaming en mi procesador. Recomendada.
-
cristian
> 3 dayEasy to use syringe. Comes with a spreader. Dropped my CPU temp by 5 degrees
-
David Chaparro
> 3 dayProducto de buena calidad. Recomendado
-
Jeffrey Elstone
> 3 dayReceived the product quickly, especially during the lockdowns worldwide. Product was was in great shape when arrived as well. No issues with it.
-
T. D. Perry
> 3 dayThink not still does the job. Been my “old reliable” for years (coming up on a decade) and still works well.
-
Kevin Garcia
> 3 dayMy temps are steady at 46-49 degrees while gaming
-
Monserrate Montalvo
> 3 dayAlto rendimiento
Performance
3 to 12 degrees centigrade lower CPU full load core temperatures than standard thermal compounds or thermal pads when measured with a calibrated thermal diode imbedded in the CPU core.
Coverage Area: A 3.5 gram syringe contains enough compound to cover at least 15 to 25 small CPU cores, or 6 to 10 large CPU cores, or 2 to 5 heat plates. At a layer 0.003" thick, the 3.5 gram syringe will cover approximately 16 square inches
Arctic Silver Thermal Cooling Compound Paste 3.5g High-Density Polysynthetic Silver
Arctic Silver 5 does not contain any silicone. The suspension fluid is a proprietary mixture of advanced polysynthetic oils that work together to provide three distinctive functional phases. As it comes from the syringe, Arctic Silver 5"s consistency is engineered for easy application. During the CPU"s initial use, the compound thins out to enhance the filling of the microscopic valleys and ensure the best physical contact between the heatsink and the CPU core. Then the compound thickens slightly over the next 50 to 200 hours of use to its final consistency designed for long-term stability. (This should not be confused with conventional phase change pads that are pre-attached to many heatsinks. Those pads melt each time they get hot then re-solidify when they cool.
The viscosity changes that Arctic Silver 5 goes through are much more subtle and ultimately much more effective.)
|
|
|
|
|
|
|---|---|---|---|---|---|
| Arctic Silver 2 Pack + Tool | Arctic Silver + Arctic Clean & Cloth | Arctic Silver + Pad/Tool & Cloth | Arctic Silver + Tool & pad | Arctic Silver Starter Kit | |
| Package Contents | Arctic Silver x2 With Tool | Arctic Silver + Arctic Clean & Cloth | Arctic Silver + Pad/Tool & Cloth | Arctic Silver + Tool & pad | Arctic Silver + Cloth + Static Kit |
