Nabob Deals Arctic Silver 5 Thermal Cooling Compound Paste 3.5g Heatsink Paste High-Density Polysynthetic Silver with Bonus Tool (Arctic Silver with Bonus Tool)
-
JHunt
Greater than one weekIts good. Slightly awkward to spread but it works, good value for the money.
-
Antonio Muñoz
> 3 dayEnfria bien y la herramienta para distribuirla es muy util.
-
cristian
> 3 dayEasy to use syringe. Comes with a spreader. Dropped my CPU temp by 5 degrees
-
Stefan G.
> 3 dayArctic Silver has been my go-to thermal compound since the early 2000’s. Highly recommend it.
-
Tirso
> 3 dayEasy to apply
-
Dave
> 3 dayBetter than many newer products. It runs 10 degrees cooler than mx4 or Noctua NT-H1 and break in period isn’t over yet.
-
Eleni Andersen
> 3 dayPerfect. I liked using the little spreading tool it comes with which removes some of the guesswork around how much paste to put. Enough product for multiple uses.
-
Sharon K Hornback
> 3 dayThis is the best thermal paste I have used I have used this stuff for years
-
Guy
> 3 dayYou dont need much to cover a CPU. enough to do 6 CUPs
-
DARIO
> 3 dayExcelente
Performance
3 to 12 degrees centigrade lower CPU full load core temperatures than standard thermal compounds or thermal pads when measured with a calibrated thermal diode imbedded in the CPU core.
Coverage Area: A 3.5 gram syringe contains enough compound to cover at least 15 to 25 small CPU cores, or 6 to 10 large CPU cores, or 2 to 5 heat plates. At a layer 0.003" thick, the 3.5 gram syringe will cover approximately 16 square inches
Arctic Silver Thermal Cooling Compound Paste 3.5g High-Density Polysynthetic Silver
Arctic Silver 5 does not contain any silicone. The suspension fluid is a proprietary mixture of advanced polysynthetic oils that work together to provide three distinctive functional phases. As it comes from the syringe, Arctic Silver 5"s consistency is engineered for easy application. During the CPU"s initial use, the compound thins out to enhance the filling of the microscopic valleys and ensure the best physical contact between the heatsink and the CPU core. Then the compound thickens slightly over the next 50 to 200 hours of use to its final consistency designed for long-term stability. (This should not be confused with conventional phase change pads that are pre-attached to many heatsinks. Those pads melt each time they get hot then re-solidify when they cool.
The viscosity changes that Arctic Silver 5 goes through are much more subtle and ultimately much more effective.)
|
|
|
|
|
|
|---|---|---|---|---|---|
| Arctic Silver 2 Pack + Tool | Arctic Silver + Arctic Clean & Cloth | Arctic Silver + Pad/Tool & Cloth | Arctic Silver + Tool & pad | Arctic Silver Starter Kit | |
| Package Contents | Arctic Silver x2 With Tool | Arctic Silver + Arctic Clean & Cloth | Arctic Silver + Pad/Tool & Cloth | Arctic Silver + Tool & pad | Arctic Silver + Cloth + Static Kit |
Related products
