Nabob Deals Arctic Silver 5 Thermal Cooling Compound Paste 3.5g Heatsink Paste High-Density Polysynthetic Silver with Bonus Tool (Arctic Silver with Bonus Tool)
-
Claude
> 24 hourdid the job and processor happy
-
pjazz
> 24 hourWorks very well I use it while cleaning my computer and applied heat sink chemical between processor and fan. Good price. Dont over pay for more expensive item.
-
Leroy Stahr
> 24 hourGood product but expensive
-
Michael
> 24 hourWish it could have been a two day but other then that great stuff
-
Jared
> 24 hour<3
-
Zach Thomas
> 24 hourKeeps temperatures under control even in higher end applications. I have an overclocked Vega FE with the blower cooler drawing about 280W and temps stay well within a reasonable range. No reason to spend 3-4 times as much for paste that’ll do the same thing!
-
David
> 24 hourAs always, this stuff is a bit pricey for how much you get but it always gives good results when applying.
-
ibrahim
> 24 hourEasy to apply , works really good for GPU and CPU
-
Russell A. Fry
> 24 hourWhat more can I say? It is heat sink compound, as long as the component doesnt over heat it is doing its job.
-
Seamus Gusikowski
> 24 hourSuper easy to use. Put a pea size drop on the cpu and attached the AIO water cooler. Perfect temperatures.
Performance
3 to 12 degrees centigrade lower CPU full load core temperatures than standard thermal compounds or thermal pads when measured with a calibrated thermal diode imbedded in the CPU core.
Coverage Area: A 3.5 gram syringe contains enough compound to cover at least 15 to 25 small CPU cores, or 6 to 10 large CPU cores, or 2 to 5 heat plates. At a layer 0.003" thick, the 3.5 gram syringe will cover approximately 16 square inches
Arctic Silver Thermal Cooling Compound Paste 3.5g High-Density Polysynthetic Silver
Arctic Silver 5 does not contain any silicone. The suspension fluid is a proprietary mixture of advanced polysynthetic oils that work together to provide three distinctive functional phases. As it comes from the syringe, Arctic Silver 5"s consistency is engineered for easy application. During the CPU"s initial use, the compound thins out to enhance the filling of the microscopic valleys and ensure the best physical contact between the heatsink and the CPU core. Then the compound thickens slightly over the next 50 to 200 hours of use to its final consistency designed for long-term stability. (This should not be confused with conventional phase change pads that are pre-attached to many heatsinks. Those pads melt each time they get hot then re-solidify when they cool.
The viscosity changes that Arctic Silver 5 goes through are much more subtle and ultimately much more effective.)
|
|
|
|
|
|
|---|---|---|---|---|---|
| Arctic Silver 2 Pack + Tool | Arctic Silver + Arctic Clean & Cloth | Arctic Silver + Pad/Tool & Cloth | Arctic Silver + Tool & pad | Arctic Silver Starter Kit | |
| Package Contents | Arctic Silver x2 With Tool | Arctic Silver + Arctic Clean & Cloth | Arctic Silver + Pad/Tool & Cloth | Arctic Silver + Tool & pad | Arctic Silver + Cloth + Static Kit |
