Noctua NH-C14S, Premium CPU Cooler with NF-A14 PWM 140mm Fan (Brown)
-
Zaxon
> 24 hourI purchased this cooler because I had an awkward computer set up. Firstly, the case is too thin for full-sized tower coolers. And secondly, I have high profile memory. This made it almost impossible to find an air cooler that would work in my rig. But the NH-C14S was the answer.
-
Brian P.
> 24 hourI needed a high quality cooler that would fit into a 4U rackmount server case. This one was perfect when configured in the low profile fan setup. Very high quality as you would expect from Noctua.
-
SCrashNeT
> 24 hourEs extraordinaria la calidad de esta marca, y me llevé la sorpresa que era compatible como lga1700 aunque la descripcción no lo menciobaba...
-
Ben
> 24 hourWarning of the height (158mm if you install fan on top)
-
Razzz
> 24 hourCaught it on sale and replaced a Noctua NH-L9x65 (which moves less air), so the mounting bracket system was the same. Had to remove the fan to access the two hold-down screws then mounted the fan in the upper position (and blowing down). Not sure what the most efficient cooling position is and Noctua instructions did no say but they did note the upper position is the more quiet position besides including two extra fan wire holders if you want to run two fans in both mounting positions (and noted to use the throttle cable on the upper fan in that configuration).
-
unfulfilled techie
> 24 hourThis cpu cooler is extremely huge
-
Joe Maliszewski
> 24 hourJust installed my NH-C14S. Relevant specs on my rig:
-
Jeffrey Morse
> 24 hourBought this mainly to boost the overclock of an FX-8320E. I was hoping that the top down design would better cool the surrounding motherboard components. The northbridge is actually running a few degrees hotter. My previous cooler was an old 120 mm Xigmatek tower cooler that cost one third what this one does. It cooled just as well and the Scythe fan on it is quieter than the Noctua 140 mm at load. I sort of feel Ive been taken.
-
NyMazTek315
> 24 hourUsing this air cooler for a AMD 5900x and Asus ROG B450-F. It was super easy to install and works great.
-
G. Petkov
> 24 hourSocket: AM4
Successor to the award-winning NH-C14, the NH-C14S is an elite class top-flow CPU cooler that is extremely efficient, highly compatible and remarkably adjustable. Thanks to its deeper fin stack and the renowned NF-A14 PWM fan, the single fan NH-C14S provides similar quiet cooling performance to its dual fan predecessor while being even more versatile: With the fan installed on top of the fins, the cooler is compatible with RAM modules of up to 70mm height. With the fan installed underneath the fins, the total height of the cooler is only 115mm, making it suitable for use in many HTPC cases. At the same time, the new offset layout allows it to clear the top PCIe slot on most µATX and ATX motherboards. Topped off with the trusted, pro-grade SecuFirm2 multi-socket mounting system and Noctua’s proven NT-H1 thermal compound, the NH-C14S is a premium quality top-flow solution for the highest demands.
|
|
|
|
|
|---|---|---|---|
Low Profile ModeRun with the NF-A14 fan installed underneath the fin stack, the NH-C14S stands only 115mm tall, which is much lower than tower coolers with 140mm or 120mm fans and allows it to fit many desktop style or HTPC cases. |
High Clearance ModeRun with the NF-A14 fan installed on top, the NH-C14S provides extended clearance underneath the fin stack. This way, it is fully compatible with chipset coolers and RAM modules with heat-spreaders of up to 70mm height. |
NF-A14 140mm premium fanFeaturing sophisticated aerodynamic optimisations such as Flow Acceleration Channels, the NF-A14 is renowned to be among the best quiet 140mm fans on the market. Combined with the deeper fin stack of the NH-C14S, it allows the cooler to achieve similar performance levels as its dual fan predecessor despite only using a single NF-A14. |
NT-H1 thermal compoundNoctua’s much-acclaimed NT-H1 is a pro-grade TIM solution that provides minimum thermal resistance, excellent ease of use and outstanding reliability. Chosen again and again by overclockers and enthusiast users worldwide, it has established itself as a benchmark for premium-quality thermal compounds. |
C-Type top-flow design
The c-type top-flow design of the NH-C14S not only allows for superb quiet cooling performance while maintaining a much lower profile than today"s 140mm tower-style coolers but also ensures excellent airflow over RAM modules and near-socket motherboard components.
Measurements
- Height (without fan): 115 mm
- Width (without fan): 140 mm
- Depth (without fan): 163 mm
- Height (with fan): 115/142 mm
- Width (with fan): 140 mm
- Depth (with fan): 163 mm
- Weight (without fan): 820 g
- Weight (with fan/s): 1015 g
Material
Copper (base and heat-pipes), aluminium (cooling fins), soldered joints & nickel plating
Cooler Specifications
Scope of delivery
- 1x NF-A14 PWM premium fan
- Low-Noise Adaptor (L.N.A.)
- Fan clips for second fan
- NT-H1 high-grade thermal compound
- SecuFirm2 Mounting Kit
- Noctua Metal Case-Badge
Socket compatibility
Intel LGA1700, LGA1200, LGA1156, LGA1155, LGA1151, LGA1150, LGA2066, LGA2011-0, LGA2011-3 (Square ILM) & AMD AM4, AM5