Noctua NH-C14S, Premium CPU Cooler with NF-A14 PWM 140mm Fan (Brown)
-
KcMsterpce
> 3 dayI was a slightly concerned about this fitting with the fan on the TOP of the cooler and still being able to fit in my Hyte Revolt 3 case. It turns out that it fits perfectly. To the millimeter.
-
Jacob Thompson
> 3 dayYou can tell this brand cares about the unboxing experience for their customers. Documentation was easy to ready and clear. Mounting system was easy to install. CPU heatsink was easy to install. Fan was easy to install.
-
L
> 3 dayUsed with high end i7 processor. Concerned about the height because i had to ship th esystem after it was built, but no issues. It screws down to the motherboard vs snaps which is good. There is some flex if you need to bend the pipes a little. One thing to note on my Asus motherboard, it does block 2 of the memory banks. So i had to install before i put on this cooler. Other than that A+
-
Chris
> 3 dayi3 8350k 72C torture, 34C idle
-
paul V
Greater than one weeki Love the innovation of the mount style,. I mounted the noctua fan underneath and a 14 inch rgb fan on top , no problems dissapating the 125w tdp of the overclocked i9 with the bonus of dragging fresh air over the VRMs and ram
-
Andrew
> 3 dayOn par with my corsair h150i pro for performance at 1000 rpm, and the corsair had 3 fans + a pump, and the pump is a very whiney frequency. At less than half the price of the h150i pro, the c14s is a great buy. If your case doesnt have side panel vents, make sure to put the fan on the bottom so you dont choke the airflow by having the fan right up against the glass.
-
J B
> 3 dayNice piece of gear. Easy to install, and fit easily inside Coolermaster n200 case. Temps have been very cool with included single fan in downward orientation.
-
Mrs. Myrna Murphy
> 3 dayWorks very well in my Silverstone GD09 case handling an i7-10700 non k. Easy installation and handy accessories came with it also.
-
Marjory Marquardt
> 3 dayIt was a bit difficult to install in my mid size case but work the effort. It has dropped CPU temp 20 degree C and is almost silent.
-
Federico
Greater than one weekVery good performance, I inmediately noticed an improvement in CPU temperatures.
Successor to the award-winning NH-C14, the NH-C14S is an elite class top-flow CPU cooler that is extremely efficient, highly compatible and remarkably adjustable. Thanks to its deeper fin stack and the renowned NF-A14 PWM fan, the single fan NH-C14S provides similar quiet cooling performance to its dual fan predecessor while being even more versatile: With the fan installed on top of the fins, the cooler is compatible with RAM modules of up to 70mm height. With the fan installed underneath the fins, the total height of the cooler is only 115mm, making it suitable for use in many HTPC cases. At the same time, the new offset layout allows it to clear the top PCIe slot on most µATX and ATX motherboards. Topped off with the trusted, pro-grade SecuFirm2 multi-socket mounting system and Noctua’s proven NT-H1 thermal compound, the NH-C14S is a premium quality top-flow solution for the highest demands.
|
|
|
|
|
|---|---|---|---|
Low Profile ModeRun with the NF-A14 fan installed underneath the fin stack, the NH-C14S stands only 115mm tall, which is much lower than tower coolers with 140mm or 120mm fans and allows it to fit many desktop style or HTPC cases. |
High Clearance ModeRun with the NF-A14 fan installed on top, the NH-C14S provides extended clearance underneath the fin stack. This way, it is fully compatible with chipset coolers and RAM modules with heat-spreaders of up to 70mm height. |
NF-A14 140mm premium fanFeaturing sophisticated aerodynamic optimisations such as Flow Acceleration Channels, the NF-A14 is renowned to be among the best quiet 140mm fans on the market. Combined with the deeper fin stack of the NH-C14S, it allows the cooler to achieve similar performance levels as its dual fan predecessor despite only using a single NF-A14. |
NT-H1 thermal compoundNoctua’s much-acclaimed NT-H1 is a pro-grade TIM solution that provides minimum thermal resistance, excellent ease of use and outstanding reliability. Chosen again and again by overclockers and enthusiast users worldwide, it has established itself as a benchmark for premium-quality thermal compounds. |
C-Type top-flow design
The c-type top-flow design of the NH-C14S not only allows for superb quiet cooling performance while maintaining a much lower profile than today"s 140mm tower-style coolers but also ensures excellent airflow over RAM modules and near-socket motherboard components.
Measurements
- Height (without fan): 115 mm
- Width (without fan): 140 mm
- Depth (without fan): 163 mm
- Height (with fan): 115/142 mm
- Width (with fan): 140 mm
- Depth (with fan): 163 mm
- Weight (without fan): 820 g
- Weight (with fan/s): 1015 g
Material
Copper (base and heat-pipes), aluminium (cooling fins), soldered joints & nickel plating
Cooler Specifications
Scope of delivery
- 1x NF-A14 PWM premium fan
- Low-Noise Adaptor (L.N.A.)
- Fan clips for second fan
- NT-H1 high-grade thermal compound
- SecuFirm2 Mounting Kit
- Noctua Metal Case-Badge
Socket compatibility
Intel LGA1700, LGA1200, LGA1156, LGA1155, LGA1151, LGA1150, LGA2066, LGA2011-0, LGA2011-3 (Square ILM) & AMD AM4, AM5
Related products
