Noctua NH-D15, Premium CPU Cooler with 2X NF-A15 PWM 140mm Fans (Brown)
-
C L
> 3 dayThrew this baby on my i7-8700k, keeps temps well below 60 no matter how hard I push my rig. This cooler is massive so please make sure it will fit your case before purchasing or youre going to have a bad time.
-
Rashad Fritsch
> 3 dayInstallé avec un I7 9700K ROG STRIX 390-F et un boitier Fracal Design R6C
-
Uriel F.
> 3 dayLivraison rapide en 1 jour, marqué Bon mais reçu comme neuf avec toutes les pièces, seulement des traces de chauffe sur le métal (négligeable on va pas se mentir).
-
Kyle
> 3 dayWhen the cooler arrived, I unboxed it to find parts for a mounting system for the fan. This fan is really good I am currently using a Intel Core i9 11900K processor and it is keeping the processor cool. The mounting system did take some time to figure out.
-
Joseph Jelison
> 3 dayIt is very big but the performance lives up to the excellent ratings this product receives. My water cooler finally quit working and this air cooled model was a little less expensive. Fewer moving parts and great performance! I would not hesitate to but a Noctua cooler again. 5 Stars!
-
Russell E. Mathis
Greater than one weekThis thing is amazing! Went from 80C at 4.4ghz to 60C at 4.5ghz with I5-7600K with prime95 test. Easy to install, great product!
-
Mr. F. Bou.
> 3 dayUtilisé sur un 5950x, aucune indication ni aucun commentaire sérieux sur internet permettait de savoir si rester en air était viable plutôt que de passer en aio.
-
Yousef Alhajeri
> 3 dayThe best cooler Ive ever tried, this is my third time to purchase.
-
Cliente Arnazon
Greater than one weekGrande, muyyyy graaande y necesita tanto una caja (torre) como una placa base, de acuerdo a su sobre-medidas, si no, es posible que se encuentren con algún problema en la instalación, por falta de espacio.
-
Zachariah O'Connell V
> 3 dayThis is the best air cooler you can get. It is quiet and effective. My one caveat is to check you RAM height. I have RAM with high heat sink and I had to use a pull- pull configuration because the fan will not fit in top of the RAM.
Built on the basis of the legendary NH-D14 and carrying on its quest for ultimate quiet cooling performance, Noctua’s flagship model NH-D15 is an elite-class dual tower cooler for the highest demands. Its expanded heatpipe layout and two premium grade NF-A15 140mm fans with PWM support for automatic speed control allow it to further improve the NH-D14’s award-winning efficiency. Topped off with the trusted, pro-grade SecuFirm2 multi-socket mounting system and Noctua’s proven NT-H1 thermal compound, the NH-D15 forms a complete premium quality solution that represents a deluxe choice for overclockers and silent-enthusiasts alike.
|
|
|
|
|
|---|---|---|---|
Widened fin stack and expanded heatpipe layoutCompared to the NH-D14, the NH-D15"s fin-stack has been widened from 140 to 150mm and its heatpipes are now spaced further apart, which allows for a more uniform heat distribution over a larger surface area and thus contributes to the NH-D15"s superior efficiency. |
High RAM compatibility in single fan modeThanks to its recessed lower fins, the NH-D15 provides 64mm clearance for tall memory heatsinks in single fan mode, making it compatible with most high end RAM modules on the market. In dual fan mode, the NH-D15 should be used with standard height RAM (up to 32mm). In chassis with more than 165mm CPU cooler clearance, the front fan can be moved upwards to make room for memory modules taller than 32mm. |
Dual NF-A15 140mm fansThe NH-D15 features two of Noctua"s premium class NF-A15 140mm fans. Complying with Noctua"s AAO standard and featuring sophisticated aerodynamic design measures such as Flow Acceleration Channels, the NF-A15 has quickly built up a reputation as one of the best 140mm fans on the market. |
NT-H1 thermal compoundNoctua"s much-acclaimed NT-H1 is a well proven pro-grade TIM solution that provides minimum thermal resistance, excellent ease-of-use and outstanding reliability, which makes it suitable for use in professional server and workstation environments. |
Measurements
- Height (without fan): 160 mm
- Width (without fan): 150 mm
- Depth (without fan): 135 mm
- Height (with fan): 165 mm
- Width (with fan): 150 mm
- Depth (with fan): 161 mm
- Weight (without fan): 980 g
- Weight (with fan/s): 1320 g
Materials
Copper (base and heat-pipes), aluminium (cooling fins), soldered joints & nickel plating
Cooler Specifications
Scope of delivery
- 2x NF-A15 PWM premium fan
- 2x NA-RC7 Low-Noise Adaptor (L.N.A)
- NA-YC1 4-pin PWM y-cable
- NT-H1 high-grade thermal compound
- SecuFirm2 mounting kit
- Noctua Metal Case-Badge
Fan compatibility
140x150x25 (with 120mm mounting holes), 140x140x25 (with 120mm mounting holes), 120x120x25
6 heatpipe dual tower design
As compared to conventional single tower heatinks, the NH-D15"s fine-tuned six heatpipe dual tower design provides more surface area, better heat-distribution and superior airflow efficiency in dual fan mode.
|
|
|
|
|
|
|---|---|---|---|---|---|
| NH-D15 | NH-D15S | NH-D15 SE-AM4 | NH-D15 chromax.black | NH-D15S chromax.black | |
| LGA2066, LGA2011-0 & LGA2011-3 | ✓ | ✓ | with NM-i20xx | ✓ | ✓ |
| LGA1700 | ✓ | ✓ | with NM-i17xx-MP83 | ✓ | ✓ |
| LGA1200, LGA115x (LGA1150, LGA1151, LGA1155, LGA1156) | ✓ | ✓ | with NM-i115x-1200 | ✓ | ✓ |
| LGA775 & LGA1366 | with NM-I3 | with NM-I3 | with NM-I3 | with NM-I3 | with NM-I3 |
| Xeon LGA2011 Narrow ILM / Xeon LGA1366 & LGA1356 | X | X | X | X | X |
| Xeon LGA3647 | X | X | X | X | X |
| Xeon LGA4189 | X | X | X | X | X |
| AM5 | ✓ | ✓ | ✓ | ✓ | ✓ |
| AM4 | ✓ | ✓ | ✓ | ✓ | ✓ |
| sTRx4, sWRX8, TR4, SP3 | X | X | X | X | X |
Related products
