Noctua NH-D15, Premium CPU Cooler with 2X NF-A15 PWM 140mm Fans (Brown)

(0 Reviews)

Price
$92.36

Quantity
(10000 available )

Total Price
Share
3568 Ratings
3140
260
72
33
63
Reviews
  • Tom

    > 3 day

    Truly the best air cooler on the market. Allowed me to score in the top 1% of benchmarks with a Ryzen 5800X3D

  • Ms. Beaulah Stracke

    > 3 day

    Aus Platzgründen nur mit einem der beiden mitgelieferten Lüfter montiert bleibt alles schön unter 50° selbst an den zurückliegenden heißen Tagen. Bei der Montage unbedingt die Bauhöhe beachten und mit den Daten des eigenen Gehäuses abgleichen. Der Lamellendoppelturm ist mächtig ;) . ich empfehle bei vorhandenem Netzteil mit Kabelmanagement ggf. das Stromversorgungskabel für den Prozessor schon vor der Montage des Mainboards in das Gehäuse einzustecken wenn man keine Möglichkeit hat von oben oder der Rückseite den Anschluss zu erreichen. Ich musste jedenfalls mit viel Fingerspitzengefühl nach erfolgtem Einbau genau dieses Kabel in den Stecker zaubern ;) .

  • Nicholas

    > 3 day

    Perfect. Dropped my CPU Temp at max load from 90 to 68C

  • S. K.

    > 3 day

    Another Noctua fan, this fan keeps my CPU super cool. Easy, easy, easy to install.

  • W

    Greater than one week

    Love the product. Keeps i9 10850k quite cool.

  • Briana

    > 3 day

    This thing is a beast and is pretty big too. Luckily I got a full tower case. I had an water block before and it was ok, but I do not remember getting such high temps on air before so I went back and got this bad boy. Glad I did because my temps have dropped at most 10c at load. Assembly wasnt except for the fan hangars those were slightly difficult

  • Hunter

    > 3 day

    I was kind of worried it wouldnt fit - I have a micro-ATX board in a small-ish case (Fractal Design ARC mini.) The fins also have a kind of notch that allows clearance for RAM installed close to the CPU socket on either side. My DIMMs are fairly low profile, but even sticks with much larger heatsinks should fit. I did have to orient it so that the fans are pointed toward the top of the case so that it wouldnt block the video card in the top PCIE slot. This meant I had to move the lower fan to the inside of the assembly, in a pull orientation - the lower fins are just above the top of the video card. Moving the fans around is easy - they just snap onto the fins with retention bracket. It hasnt seemed to affect temperatures either - low-mid 30s, even under load (i5 6600k @ 4.4.) Fans are almost silent as well. Includes adapters for AMD and LGA 2011, which I cant comment on since I didnt need them.

  • Lisandro Schroeder

    > 3 day

    Temperature in idle tra 26/27°, sotto stress in OCCT in media 50° e tocca raramente i 60° in spike, un ottimo dissipatore.

  • alex

    > 3 day

    Top kühler habe damit ein fx 8350 übertaktet auf (5ghz) 1,5 v lief immer noch bei bei 50c zu Lautstärke kann ich nichts zu sagen lief immer auf volle Stärke und habe auch noch andere kühle drin dir Geräusche machen

  • D. Hoffman

    > 3 day

    I purchased an bare ATX AIGO CPU Case that had plenty of room. The Noctua NH-D15, Premium CPU Cooler with 2X NF-A15 PWM 140mm Fans (Brown) is big and takes up a lot of room. However, it is quiet, looks great, and its cooling performance is superb! A plus for computer modders is that it has that mechanical and futuristic curb appeal. Noctua does a great job in providing a kit that will fit the majority of motherboard setups. In my case, there was a bracket used on intel CPUs that is attached on the backside of the motherboard. My CPU case ensured that there was an exposed area for the bracket in case the motherboard was installed first. It allows you can assemble the cooler bracket without having to remove the motherboard. I highly recommend this cooler unit!

NH-D15 HeaderNH-D15 Header

Built on the basis of the legendary NH-D14 and carrying on its quest for ultimate quiet cooling performance, Noctua’s flagship model NH-D15 is an elite-class dual tower cooler for the highest demands. Its expanded heatpipe layout and two premium grade NF-A15 140mm fans with PWM support for automatic speed control allow it to further improve the NH-D14’s award-winning efficiency. Topped off with the trusted, pro-grade SecuFirm2 multi-socket mounting system and Noctua’s proven NT-H1 thermal compound, the NH-D15 forms a complete premium quality solution that represents a deluxe choice for overclockers and silent-enthusiasts alike.

NH-D15NH-D15

NH-D15 Single Fan RAMNH-D15 Single Fan RAM

NF-A14 fanNF-A14 fan

NT-H1NT-H1

Widened fin stack and expanded heatpipe layout

Compared to the NH-D14, the NH-D15"s fin-stack has been widened from 140 to 150mm and its heatpipes are now spaced further apart, which allows for a more uniform heat distribution over a larger surface area and thus contributes to the NH-D15"s superior efficiency.

High RAM compatibility in single fan mode

Thanks to its recessed lower fins, the NH-D15 provides 64mm clearance for tall memory heatsinks in single fan mode, making it compatible with most high end RAM modules on the market. In dual fan mode, the NH-D15 should be used with standard height RAM (up to 32mm). In chassis with more than 165mm CPU cooler clearance, the front fan can be moved upwards to make room for memory modules taller than 32mm.

Dual NF-A15 140mm fans

The NH-D15 features two of Noctua"s premium class NF-A15 140mm fans. Complying with Noctua"s AAO standard and featuring sophisticated aerodynamic design measures such as Flow Acceleration Channels, the NF-A15 has quickly built up a reputation as one of the best 140mm fans on the market.

NT-H1 thermal compound

Noctua"s much-acclaimed NT-H1 is a well proven pro-grade TIM solution that provides minimum thermal resistance, excellent ease-of-use and outstanding reliability, which makes it suitable for use in professional server and workstation environments.

NH-D15 specNH-D15 spec
Measurements
  • Height (without fan): 160 mm
  • Width (without fan): 150 mm
  • Depth (without fan): 135 mm
  • Height (with fan): 165 mm
  • Width (with fan): 150 mm
  • Depth (with fan): 161 mm
  • Weight (without fan): 980 g
  • Weight (with fan/s): 1320 g
Materials

Copper (base and heat-pipes), aluminium (cooling fins), soldered joints & nickel plating

Cooler Specifications

Scope of delivery

  • 2x NF-A15 PWM premium fan
  • 2x NA-RC7 Low-Noise Adaptor (L.N.A)
  • NA-YC1 4-pin PWM y-cable
  • NT-H1 high-grade thermal compound
  • SecuFirm2 mounting kit
  • Noctua Metal Case-Badge
Fan compatibility

140x150x25 (with 120mm mounting holes), 140x140x25 (with 120mm mounting holes), 120x120x25

d15d15

6 heatpipe dual tower design

As compared to conventional single tower heatinks, the NH-D15"s fine-tuned six heatpipe dual tower design provides more surface area, better heat-distribution and superior airflow efficiency in dual fan mode.

NH-D15 table NH-D15S table NH-D15 table NH-D15 chromax.black table NH-D15S chromax.black table
NH-D15 NH-D15S NH-D15 SE-AM4 NH-D15 chromax.black NH-D15S chromax.black
LGA2066, LGA2011-0 & LGA2011-3 with NM-i20xx
LGA1700 with NM-i17xx-MP83
LGA1200, LGA115x (LGA1150, LGA1151, LGA1155, LGA1156) with NM-i115x-1200
LGA775 & LGA1366 with NM-I3 with NM-I3 with NM-I3 with NM-I3 with NM-I3
Xeon LGA2011 Narrow ILM / Xeon LGA1366 & LGA1356 X X X X X
Xeon LGA3647 X X X X X
Xeon LGA4189 X X X X X
AM5
AM4
sTRx4, sWRX8, TR4, SP3 X X X X X

Related products

Shop
Kim's Store
Kim's Store
( 0 Reviews )
Visit Store
Top Selling Products