Noctua NH-D15, Premium CPU Cooler with 2X NF-A15 PWM 140mm Fans (Brown)

(0 Reviews)

Price
$92.36

Quantity
(10000 available )

Total Price
Share
3568 Ratings
3140
260
72
33
63
Reviews
  • Kirk

    > 3 day

    Im usually not one to write a review, but in this case, I have to add to the praise about this cooler. Im sitting here writing this as Im running a prime95 test on my FX9590 @ 4.7GHz. AMD OverDrive shows the thermal margin getting no closer than 15 degrees from max. Ambient room temp when the test was started was roughly 21 degrees C. CoreTemp (actual temperature) numbers run right along with OverDrive (degrees from thermal margin) showing a maximum of 55 degrees C on a full load. I may have read somewhere that the low-end temps are unreliable but I show anywhere from 18-25 C at idle. The processor is just as happy as can be and thats only due to this cooler.

  • Christian S.

    > 3 day

    Die Montage gestaltete sich anfänglich etwas schwierig, da es kleine Ungenauigkeiten in der Montageanleitung gibt. Youtube-Videos haben hier geholfen. Meine CPU i5 6600k betreibe ich jetzt sehr stabil auf 4,7Ghz (ca 1,24 V) und sie wird nie wärmer als 65 °C (Vollast - CPU-intesives Gaming) und das obwohl mein Gehäuse über keinen Gehäuselüfter verfügt. Mit 89€ liegt das Gerät preislich deutlich über der Konkurenz (z.B. Dark Rock 4 PRO) , die Leistung kann sich aber sehen lassen. Kaufempfehlung!

  • salvatore

    > 3 day

    Dissipatore davvero performante per computer gaming, silenzioso e affidabile, facile da installare.

  • Dr. Reece Metz III

    > 3 day

    I7 6700k was having poor cooling with a liquid setup so got the best air cooler and this thing is better than expected. It is actually not possible for me to run the fans hard enough for this to be louder than a liquid cooler. Temps are much more stable and dropped by 5 degrees with fans on only 15%.

  • Seth Garcia

    > 3 day

    Great

  • Delta Max

    Greater than one week

    Very good, silent and efficient cooler.

  • HClarkx

    Greater than one week

    I checked dimensions, and sure enough, this cooler worked perfectly on an Asus ROG Strix B760-I ITX motherboard in an Antec ISK600 ITX case. It fit like a glove, but cleared all of some pretty tall mobo heat sinks and similar. And the fans could be set low enough to clear the case lid. The rear fan could be set low enough to blow air directly over the RAM in my case. A fan header to put both fans on one fan mobo connector was included (this ITX mobo has only two Q fan ports (also has an AIO fan port but that one is not speed controlled so isnt useful for a CPU or Case fan.

  • Sir Reginald

    > 3 day

    This is my second NH-D15, and Ill explain why Im giving it a three star review below. For starters, literally everything about the product is excellent. The packaging is top notch with beautiful printing on the box and excellent foam and cardboard inserts inside to protect every piece of the contents. The parts are separated into three sub-boxes that have diagrams and parts lists of what is inside each section. The instructions, while a little small, still clearly detail all the installation steps with clear instructions and detailed diagrams. The heatsink itself is hefty, came out of the box without as much as a smudge on it, and installed without any more trouble than you would expect from a component of this size (and it is huge). In fact, Im typing this on my computer which I just installed this in earlier today and at idle in an 80°F (27°C) room the hottest core on my stock-clocked i7 4930K is only at 89.6°F (32°C) with both CPU fans running at only around fifty percent! I did forget to mention the fans are super quiet and well made, although the color scheme is not one Im fond of.

  • Midwest_Lou

    > 3 day

    check if your case supports it, before buying. pcpartpicker has a filter for cases compatible with this humongous cooler. also in case specs there will be a tower cooler height spec. Check it!

  • Matthias S.

    > 3 day

    Einfach Klasse!

NH-D15 HeaderNH-D15 Header

Built on the basis of the legendary NH-D14 and carrying on its quest for ultimate quiet cooling performance, Noctua’s flagship model NH-D15 is an elite-class dual tower cooler for the highest demands. Its expanded heatpipe layout and two premium grade NF-A15 140mm fans with PWM support for automatic speed control allow it to further improve the NH-D14’s award-winning efficiency. Topped off with the trusted, pro-grade SecuFirm2 multi-socket mounting system and Noctua’s proven NT-H1 thermal compound, the NH-D15 forms a complete premium quality solution that represents a deluxe choice for overclockers and silent-enthusiasts alike.

NH-D15NH-D15

NH-D15 Single Fan RAMNH-D15 Single Fan RAM

NF-A14 fanNF-A14 fan

NT-H1NT-H1

Widened fin stack and expanded heatpipe layout

Compared to the NH-D14, the NH-D15"s fin-stack has been widened from 140 to 150mm and its heatpipes are now spaced further apart, which allows for a more uniform heat distribution over a larger surface area and thus contributes to the NH-D15"s superior efficiency.

High RAM compatibility in single fan mode

Thanks to its recessed lower fins, the NH-D15 provides 64mm clearance for tall memory heatsinks in single fan mode, making it compatible with most high end RAM modules on the market. In dual fan mode, the NH-D15 should be used with standard height RAM (up to 32mm). In chassis with more than 165mm CPU cooler clearance, the front fan can be moved upwards to make room for memory modules taller than 32mm.

Dual NF-A15 140mm fans

The NH-D15 features two of Noctua"s premium class NF-A15 140mm fans. Complying with Noctua"s AAO standard and featuring sophisticated aerodynamic design measures such as Flow Acceleration Channels, the NF-A15 has quickly built up a reputation as one of the best 140mm fans on the market.

NT-H1 thermal compound

Noctua"s much-acclaimed NT-H1 is a well proven pro-grade TIM solution that provides minimum thermal resistance, excellent ease-of-use and outstanding reliability, which makes it suitable for use in professional server and workstation environments.

NH-D15 specNH-D15 spec
Measurements
  • Height (without fan): 160 mm
  • Width (without fan): 150 mm
  • Depth (without fan): 135 mm
  • Height (with fan): 165 mm
  • Width (with fan): 150 mm
  • Depth (with fan): 161 mm
  • Weight (without fan): 980 g
  • Weight (with fan/s): 1320 g
Materials

Copper (base and heat-pipes), aluminium (cooling fins), soldered joints & nickel plating

Cooler Specifications

Scope of delivery

  • 2x NF-A15 PWM premium fan
  • 2x NA-RC7 Low-Noise Adaptor (L.N.A)
  • NA-YC1 4-pin PWM y-cable
  • NT-H1 high-grade thermal compound
  • SecuFirm2 mounting kit
  • Noctua Metal Case-Badge
Fan compatibility

140x150x25 (with 120mm mounting holes), 140x140x25 (with 120mm mounting holes), 120x120x25

d15d15

6 heatpipe dual tower design

As compared to conventional single tower heatinks, the NH-D15"s fine-tuned six heatpipe dual tower design provides more surface area, better heat-distribution and superior airflow efficiency in dual fan mode.

NH-D15 table NH-D15S table NH-D15 table NH-D15 chromax.black table NH-D15S chromax.black table
NH-D15 NH-D15S NH-D15 SE-AM4 NH-D15 chromax.black NH-D15S chromax.black
LGA2066, LGA2011-0 & LGA2011-3 with NM-i20xx
LGA1700 with NM-i17xx-MP83
LGA1200, LGA115x (LGA1150, LGA1151, LGA1155, LGA1156) with NM-i115x-1200
LGA775 & LGA1366 with NM-I3 with NM-I3 with NM-I3 with NM-I3 with NM-I3
Xeon LGA2011 Narrow ILM / Xeon LGA1366 & LGA1356 X X X X X
Xeon LGA3647 X X X X X
Xeon LGA4189 X X X X X
AM5
AM4
sTRx4, sWRX8, TR4, SP3 X X X X X

Related products

Shop
Kim's Store
Kim's Store
( 0 Reviews )
Visit Store
Top Selling Products