Noctua NH-D15, Premium CPU Cooler with 2X NF-A15 PWM 140mm Fans (Brown)
-
Pablo
> 3 dayDe las refrigeraciones por aire que hay por el mercado, este es el segundo Noctua que tengo, y no puedo ser mas favorable, vale el dinero que cuesta, llevo estos dias de Enero, en idle temperaturas de 18 grados, (es una torre abierta), y estrujado el procesador unos 50 grados, simplemente genial, lo recomiendo totalmente.
-
jdk
Greater than one weekIf this wont do the job than nothing will..trust me!
-
Rus
> 3 dayIve paired this beast with 2600 as the stock cooler is just an absolute garbage.
-
Thomas P.
> 3 dayPremière fois de ma vie que je commandais du noctua. Très qualitatif. Manuel en français assez clair. Il faut malgré tout prendre le temps de bien lire et comprendre avant de se lancer. Tout est fait pour aider. Package très complet avec tous les accessoires nécessaires. Bien penser à mettre sa RAM avant car bloquée une fois le ventilateur installé. Hauteur ok pour passer par dessus la RAM. Pour l’instant très satisfait .
-
pierre-luc gendreau
> 3 daygood stuff, and this is after months of use!
-
Deeksha Singh
> 3 dayAmazing fans. Easy to install and provide more than enough cooling. FYI Im using it with i7 9700K CPU and Ryzen 5700XT GPU. They are big so make sure you have a decent sized case but definitely worth it.
-
Terry
> 3 dayThis is a large cooler. Even in a large tower case it almost touches the case side so watch out for that. It is good quality and well made and comes with everything youll need, including thermal paste. Enough space around ram on an ATX board but height may be an issue.
-
Peter in Huntsville
> 3 dayI replaced a 240MM rad watercooling setup with the Noctua on a i7-6700K.
-
Tina Williamson
> 3 dayCould not be happier with my purchase!
-
ThatOneGuy
> 3 dayWhile researching coolers for a new build, AIO solutions intrigued me. But I was worried about the potential for pump failure rendering it useless. After some more research, I found that was actually a problem, also small water pumps are noisy. So I decided to stick to air coolers, as if a fan fails itll be inconvenient at worst. Noctua and Be Quiet! came up as the two I should look at for quiet operation.
Built on the basis of the legendary NH-D14 and carrying on its quest for ultimate quiet cooling performance, Noctua’s flagship model NH-D15 is an elite-class dual tower cooler for the highest demands. Its expanded heatpipe layout and two premium grade NF-A15 140mm fans with PWM support for automatic speed control allow it to further improve the NH-D14’s award-winning efficiency. Topped off with the trusted, pro-grade SecuFirm2 multi-socket mounting system and Noctua’s proven NT-H1 thermal compound, the NH-D15 forms a complete premium quality solution that represents a deluxe choice for overclockers and silent-enthusiasts alike.
|
|
|
|
|
|---|---|---|---|
Widened fin stack and expanded heatpipe layoutCompared to the NH-D14, the NH-D15"s fin-stack has been widened from 140 to 150mm and its heatpipes are now spaced further apart, which allows for a more uniform heat distribution over a larger surface area and thus contributes to the NH-D15"s superior efficiency. |
High RAM compatibility in single fan modeThanks to its recessed lower fins, the NH-D15 provides 64mm clearance for tall memory heatsinks in single fan mode, making it compatible with most high end RAM modules on the market. In dual fan mode, the NH-D15 should be used with standard height RAM (up to 32mm). In chassis with more than 165mm CPU cooler clearance, the front fan can be moved upwards to make room for memory modules taller than 32mm. |
Dual NF-A15 140mm fansThe NH-D15 features two of Noctua"s premium class NF-A15 140mm fans. Complying with Noctua"s AAO standard and featuring sophisticated aerodynamic design measures such as Flow Acceleration Channels, the NF-A15 has quickly built up a reputation as one of the best 140mm fans on the market. |
NT-H1 thermal compoundNoctua"s much-acclaimed NT-H1 is a well proven pro-grade TIM solution that provides minimum thermal resistance, excellent ease-of-use and outstanding reliability, which makes it suitable for use in professional server and workstation environments. |
Measurements
- Height (without fan): 160 mm
- Width (without fan): 150 mm
- Depth (without fan): 135 mm
- Height (with fan): 165 mm
- Width (with fan): 150 mm
- Depth (with fan): 161 mm
- Weight (without fan): 980 g
- Weight (with fan/s): 1320 g
Materials
Copper (base and heat-pipes), aluminium (cooling fins), soldered joints & nickel plating
Cooler Specifications
Scope of delivery
- 2x NF-A15 PWM premium fan
- 2x NA-RC7 Low-Noise Adaptor (L.N.A)
- NA-YC1 4-pin PWM y-cable
- NT-H1 high-grade thermal compound
- SecuFirm2 mounting kit
- Noctua Metal Case-Badge
Fan compatibility
140x150x25 (with 120mm mounting holes), 140x140x25 (with 120mm mounting holes), 120x120x25
6 heatpipe dual tower design
As compared to conventional single tower heatinks, the NH-D15"s fine-tuned six heatpipe dual tower design provides more surface area, better heat-distribution and superior airflow efficiency in dual fan mode.
|
|
|
|
|
|
|---|---|---|---|---|---|
| NH-D15 | NH-D15S | NH-D15 SE-AM4 | NH-D15 chromax.black | NH-D15S chromax.black | |
| LGA2066, LGA2011-0 & LGA2011-3 | ✓ | ✓ | with NM-i20xx | ✓ | ✓ |
| LGA1700 | ✓ | ✓ | with NM-i17xx-MP83 | ✓ | ✓ |
| LGA1200, LGA115x (LGA1150, LGA1151, LGA1155, LGA1156) | ✓ | ✓ | with NM-i115x-1200 | ✓ | ✓ |
| LGA775 & LGA1366 | with NM-I3 | with NM-I3 | with NM-I3 | with NM-I3 | with NM-I3 |
| Xeon LGA2011 Narrow ILM / Xeon LGA1366 & LGA1356 | X | X | X | X | X |
| Xeon LGA3647 | X | X | X | X | X |
| Xeon LGA4189 | X | X | X | X | X |
| AM5 | ✓ | ✓ | ✓ | ✓ | ✓ |
| AM4 | ✓ | ✓ | ✓ | ✓ | ✓ |
| sTRx4, sWRX8, TR4, SP3 | X | X | X | X | X |
