Noctua NH-D15, Premium CPU Cooler with 2X NF-A15 PWM 140mm Fans (Brown)
-
Gary P.
Greater than one weekThis is a great cooler but the colour of the fans may not be to everyones taste.
-
Umberto
> 3 dayNoctua NH-D15 con un i9-13900k temperature in idle 27° in game non ho superato i 55°
-
Christian S.
> 3 dayDie Montage gestaltete sich anfänglich etwas schwierig, da es kleine Ungenauigkeiten in der Montageanleitung gibt. Youtube-Videos haben hier geholfen. Meine CPU i5 6600k betreibe ich jetzt sehr stabil auf 4,7Ghz (ca 1,24 V) und sie wird nie wärmer als 65 °C (Vollast - CPU-intesives Gaming) und das obwohl mein Gehäuse über keinen Gehäuselüfter verfügt. Mit 89€ liegt das Gerät preislich deutlich über der Konkurenz (z.B. Dark Rock 4 PRO) , die Leistung kann sich aber sehen lassen. Kaufempfehlung!
-
Leonardo Marquez
> 3 dayAcabo de actualizar mi PC y se que los Ryzen suelen ser algo calientes, pero con este Noctua, no sube de 60 aun con cargas pesadas, es una maravilla no preocuparme por la temperatura y poder sacar maximo provecho a mi cpu
-
martin
> 3 dayà pleine puissance avec un intel i9 9900k sur carte MSI Z390 A PRO avec une temp.amb de 25° => temp.CPU 70° (soft Intel avec les ventilateurs à env. 50% vitesse).
-
Daniel
> 3 dayReally good cooler working as expected
-
samantha
> 3 dayHi, für Alle, die einen wirklich leisen Lüfter mit extrem guter Kühlleistung suchen, ist der NH-D15 absolut die richtige Wahl. Den Lüfter über den RAMs kann man z.B. nach dem Einbau der RAMs installieren um möglichst wenig an zusätzlicher Höhe zu benötigen, denn groß ist der Lüfter :) -> deshalb sollte man beim Kauf eines Gehäuses lieber die etwas breiteren nehmen, dann kann man auch die linke Seite des Gehäuses schließen. Bei mir macht der NH-D15 seinen Dienst auf einer 13600K (LGA 1700) und die Temperatur ohne Last kommt nicht über 29°C (mit der beiliegenden WLP von Noctua) - bisher keine negativen Punkte entdeckt. Im Vergleich dazu, die 12600 er CPU hat mit dem Boxed Kühler ca 36°C ohne Last, obwohl sie nur 65W und die 13600K 125W zieht. Falls ich es nicht vergesse werde ich zu einem späteren Zeitpunkt noch T-Werte unter Last ergänzen.
-
Chuck
> 3 dayThis CPU cooler is absolutely amazing & whisper quiet. It dropped my i7-87000k temperatures 20c! (Overclocked at 4.8GHz) CPU has not exceeded 65c even after hours of Battlefield 3,4 & Hardline. Thats jaw dropping, considering at 4.8GHz it used to reach the mid to upper 80s - so YES a 20 degree drop in temps under load. I was running a Corsair water block cooler with a push/pull dual 120mm fan setup & this Noctua crushes it.
-
Jay
> 3 dayCan confirm, this is the single best CPU cooling component Ive ever purchased. It strikes the Thermalright effect from the early 2000s, for older-school PC builders out there. Runs my 5820k at 4.1Ghz on all 6 cores silently at sub-70c full load. The only way I can make the CPU even heat up all that much is running a synthetic benchmark like Prime95. This is in a Corsair 400Q case fully stocked with Noctua NF-F12 fans, all silenced with included Noctua fan silencers. Beautiful.
-
Gary
> 3 dayPurchased in late December, 2021 for an Intel 12th gen new build. Was expecting to have to contact Noctua and wait to have a lga 1700 mounting kit shipped. Surprisingly, got the new batch of NH-D15 that already has the lga 1700 mount included.
Built on the basis of the legendary NH-D14 and carrying on its quest for ultimate quiet cooling performance, Noctua’s flagship model NH-D15 is an elite-class dual tower cooler for the highest demands. Its expanded heatpipe layout and two premium grade NF-A15 140mm fans with PWM support for automatic speed control allow it to further improve the NH-D14’s award-winning efficiency. Topped off with the trusted, pro-grade SecuFirm2 multi-socket mounting system and Noctua’s proven NT-H1 thermal compound, the NH-D15 forms a complete premium quality solution that represents a deluxe choice for overclockers and silent-enthusiasts alike.
|
|
|
|
|
|---|---|---|---|
Widened fin stack and expanded heatpipe layoutCompared to the NH-D14, the NH-D15"s fin-stack has been widened from 140 to 150mm and its heatpipes are now spaced further apart, which allows for a more uniform heat distribution over a larger surface area and thus contributes to the NH-D15"s superior efficiency. |
High RAM compatibility in single fan modeThanks to its recessed lower fins, the NH-D15 provides 64mm clearance for tall memory heatsinks in single fan mode, making it compatible with most high end RAM modules on the market. In dual fan mode, the NH-D15 should be used with standard height RAM (up to 32mm). In chassis with more than 165mm CPU cooler clearance, the front fan can be moved upwards to make room for memory modules taller than 32mm. |
Dual NF-A15 140mm fansThe NH-D15 features two of Noctua"s premium class NF-A15 140mm fans. Complying with Noctua"s AAO standard and featuring sophisticated aerodynamic design measures such as Flow Acceleration Channels, the NF-A15 has quickly built up a reputation as one of the best 140mm fans on the market. |
NT-H1 thermal compoundNoctua"s much-acclaimed NT-H1 is a well proven pro-grade TIM solution that provides minimum thermal resistance, excellent ease-of-use and outstanding reliability, which makes it suitable for use in professional server and workstation environments. |
Measurements
- Height (without fan): 160 mm
- Width (without fan): 150 mm
- Depth (without fan): 135 mm
- Height (with fan): 165 mm
- Width (with fan): 150 mm
- Depth (with fan): 161 mm
- Weight (without fan): 980 g
- Weight (with fan/s): 1320 g
Materials
Copper (base and heat-pipes), aluminium (cooling fins), soldered joints & nickel plating
Cooler Specifications
Scope of delivery
- 2x NF-A15 PWM premium fan
- 2x NA-RC7 Low-Noise Adaptor (L.N.A)
- NA-YC1 4-pin PWM y-cable
- NT-H1 high-grade thermal compound
- SecuFirm2 mounting kit
- Noctua Metal Case-Badge
Fan compatibility
140x150x25 (with 120mm mounting holes), 140x140x25 (with 120mm mounting holes), 120x120x25
6 heatpipe dual tower design
As compared to conventional single tower heatinks, the NH-D15"s fine-tuned six heatpipe dual tower design provides more surface area, better heat-distribution and superior airflow efficiency in dual fan mode.
|
|
|
|
|
|
|---|---|---|---|---|---|
| NH-D15 | NH-D15S | NH-D15 SE-AM4 | NH-D15 chromax.black | NH-D15S chromax.black | |
| LGA2066, LGA2011-0 & LGA2011-3 | ✓ | ✓ | with NM-i20xx | ✓ | ✓ |
| LGA1700 | ✓ | ✓ | with NM-i17xx-MP83 | ✓ | ✓ |
| LGA1200, LGA115x (LGA1150, LGA1151, LGA1155, LGA1156) | ✓ | ✓ | with NM-i115x-1200 | ✓ | ✓ |
| LGA775 & LGA1366 | with NM-I3 | with NM-I3 | with NM-I3 | with NM-I3 | with NM-I3 |
| Xeon LGA2011 Narrow ILM / Xeon LGA1366 & LGA1356 | X | X | X | X | X |
| Xeon LGA3647 | X | X | X | X | X |
| Xeon LGA4189 | X | X | X | X | X |
| AM5 | ✓ | ✓ | ✓ | ✓ | ✓ |
| AM4 | ✓ | ✓ | ✓ | ✓ | ✓ |
| sTRx4, sWRX8, TR4, SP3 | X | X | X | X | X |
