Official Creality PEI Sheet 235x235mm Flexible Removable Spring Steel Plate Magnetic Sticker Heated Bed Kit Replacement Accessory for Ender 3 S1/Ender 3/Ender 3 V2/Ender 3 Pro/Ender 5 Hot Bed Surface
-
levi madar
> 24 hourThis bed is so much better for my S1 printer than the bed it came with. The prints sticks really well but pops of easily. The only problem I have is you have to lay the bed past the screws at the back of the printer bed or else it wont fit.
-
Z N
> 24 hourThis had to be a return. The corner was dented in as if dropped, had scratch drags from a printing head scrapping and the beginnings of a layer coating coming off. Not sure if it would work as intended.
-
D. Huang
> 24 hourSticks great to pla! No complaints!
-
Michael Krupar
> 24 hourOrdered wrong size
-
The_Mandalorian
> 24 hourOrdered new and came sealed, etc. But product has scratches on the sheet and some type of bubble on the side of it. Not sure if the QC is bad or what...
-
Jack Price
> 24 hourI bought 2 of these for my Ender 3s ... the original flexible rubber mats were in bad shape after hundreds of prints. These spring steel plates are super for popping off prints. PEI coating kind of useless. Bed adhesion was a problem, but a few strokes of Elmers purple glue stick and all was good. Since I already had a magnetic bed, I didnt need the included one. Steel plate sticks firmly to bed, heats up nice, prints have a flat smooth bottom.
-
Bussaca
> 24 hourIt is nice. I think it is well made. I dont think they needed to package it as heavily. Can you get this for cheaper. sure can.
-
John Palmer
> 24 hourThese are good for most filaments I have tried. PETG is a little rough sometimes, and silk pla sometimes is iffy sticking, but most are perfect. Beware the counterfeits.
-
Kevin
> 24 hourThis product was a perfect replacement for my ender 3. It heats up at a good pace and doesnt dent when you pull the print off (dont do that still, its just to explain how sturdy this is) The package is strong, and it makes sure not to curve the plate, which I do appreciate. This is a must have for an Ender 3 Printer.
-
Marcelo T.
> 24 hourits as good as you can get for a build plate
100% Official Creality PEI Removable Magnetic Flexible Heated Bed Platform is mainly divided into 3 layers:
- The first layer is made of PEI material. Smooth surface, good adhesion to various printing materials, especially PLA and ABS, high-temperature resistance.
- The second layer is a flexible steel plate, which is specially used to make springs and flexible elements, has strong deformability.
- The third layer is the magnetic base，which is made of soft magnetic rubber, soft in texture and has good magnetism and temperate, bure resistance. With 3M adhesive, it can be directly attached to the heated bed platform.
NOTE！
- 1.Please remove the transparent protective film on the surface before use!
- 2.Level the bed and set the height of the nozzle before printing!
- 3.Please use the recommended/usual nozzle and hotbed temperature for printing. If it cannot adhere, please try to change 2 or 3 degrees.
- 4.The PEI sheet can bear the maximum temperature of the nozzle at 200°C, and the hotbed at 70°C.
- 5.The color may exist a slight difference due to different screen displays.
|
|
|
|
|---|---|---|
Strong magnetic fieldUsing 3M adhesive to attach the soft magnetic sticker to the hotbed will no damage to the magnetic field under 130°C. |
No deformation at 200°CGenuine PEI powder coating is of heat resistance. Hardened steel spring plated is resistant to 200°C and no deformation. |
Handle designThe new design adds a handle to the steel plate, which makes it easier and faster to take out the steel plate. And outside the heated bed, it will not burn your hands. |
|
|
|
|
|---|---|---|
Quickly RemoveNo need for tape, glue, and shovel which release your printing anxiety. Easy to remove the prints just take out the spring steel plate and slightly flex it repeatedly to pop your prints right off. |
Smooth BottomThe PEI printing plate surface is smooth that will not leave any marks on the bottom of the prints. There is a good combination of hot-melt material and the printing layer, which reduces the deformation caused by shrinkage and avoids warping. |
Easy to cleanPlease clean the dust with a soft cloth. Wipe the stains with Low concentration alcohol gently. Do NOT wash or clean the PEI surface with any strong chemical reagents, or strong detergents. |
