phrozen Aqua-Gray 4K Resin for High-Precision 3D Printing,405nm LCD UV-Curing Photopolymer Resin for Low Shrinkage, Great Detail, Low Odor, Non-Brittle (1KG)

Very nice quality resin, especially for miniatures. Uncured resin cleans very easily with IPA compared to other resins Ive tried. This is my new go-to resin for miniatures!

Print quality is only a little better than abs like resin. And youll need to increase the cure time on the initial layers

I got this as my first-ever resin for my Epax E10 to make the most of the high-resolution screen. I printed a miniature with long thin weapons and many small details. Printing at 0.5mm layer height with 2s exposure worked great, and supports pulled off painlessly after washing but before curing for 2 minutes. I use 4 base layers at 15 seconds each. For more challenging prints Ive had to raise the exposure up to 2.5s to give the supports enough grip on the large pieces. The finer parts like spears have a surprising bit of stiff flex to keep them impact resistant (but not bend resistant). I have some flex resin on the way to try mixing this with just to experiment for more injection-molded-like durability, but this stuff is already better than I expected. I knocked a star off because the fumes really made my big open basement unbearable without a respirator. You always need one anyway, but I thought the claimed low odor would do well in such a huge space.

I can’t get the settings dialed in and far too many prints fail. Switching to Siraya Tech Fast Navy Gray.

The print quality is amazing. Dosnt Crack or break when printing. Easy to cure and the smell of the resin is not strong . And the color you pick is spot on to what is shown on the website .I give this resin a 5 star review.

Not much to say here. Its a little bit expensive, but there isnt better resin out there for the Phrozen Sonic Mini 4k.

Excellent results. Once cured, holds paint great.

Delivery was much faster than expected. Good quality printing resin. Will buy again.

I really like this product Amazon was really good for replacing the one that was damaged by the delivery driver putting the box by the rear tire of a car that ran over it but beyond that once I actually got the product and started using it it’s great does exactly what it’s supposed to and the prints are beautiful

I ordered 2 bottles of 4k grey resin to Chile. 1 month later, I got the 2 resins in the correct package, but to my surprise, when I opened them, they were 2 bottles of phrozen abs-like resin. I wont go thru the process of getting them back.. so i am stuck with these resins. I tested them. Worst resins I have test. Printed in phrozen mighty 4k, they where so stuck to the base plate, that when I was going to remove them they shattered in small pieces. bad resin. not what i ordered.