SFP+ Cable, 10G SFP+ DAC, 0.5M(1.64ft), Passive Direct Attach Copper Twinax Cable for Cisco SFP-H10GB-CU0.5M, Ubiquiti UniFi UC-DAC-SFP+, Meraki, Mikrotik, Intel, Fortinet, Netgear, 0.25m-7m

Installed between the DM-Pro and Ubiquity switch. Works great at a much lower cost than OEM.

Worked as advertised. Wanted to use a SFP port to free up one of the RJ-45 ports on my switch. Also wanted to learn more about SFPs and how they worked. Great price and good product for an attached SFP. Would recommend.

To get this to work, I had to do two things: - Use the bottom SFP port of the US-24-250W - In the US-24-250W config > services > priority > Set to 4096 or lower - In the US-24-250W, set port 26 link speed to 1Gbps FDX - In the UDMP, set port 11 link speed to 1Gbps FDX - Make sure there is no other cable attaching the two units together or youll see an SFP blocked notice on the port on the switch side The lights on both SFP+/SFP ports should light up if done correctly.

Plugged in and works, what more can you ask

I have a pair of Linksys LGS552P 48 port switches which each have 2 10G SFP+ ports. These are plug and play and create a simple fast trouble free connection. I didnt need to worry about separate transceivers and cables. Highly recommended for Linksys (there arent many out there) devices. Works great!

Great shortie SFP+ cable. The 0.25M cable is the perfect length to connect two 1U devices that are right on top of each other. I use it to connect my Unifi UDMP to a USW Aggregation switch. Cable is well built and well packaged. Ubiquiti gear recognizes it as 10Gbps link. No complaints here.

Blue SFP Cable, 10G SFP+ DAC, 0.5M, 10GBASE-CU Passive Direct Attach Copper Twinax Cable for Cisco SFP-H10GB-CU0.5M, Meraki, Ubiquiti, Mikrotik, Intel, Fortinet, Netgear, D-Link, Open Switch Devices Pros: - SFP+ to SFP+ DAC Twinax cable - 0.5-meter (1.64ft) - AWG30 - compatible with various manufacturer gear: Cisco, Meraki, Ubiquit, Mikrotik, Intel, Fortinet, Netgear, D-Link, TP-Link, Linksys, Broadcom, Zyxel, etc. Cons: - None

Excellent quality. Will definitely buy again!

This DAC cable is intended for use with SFP+ ports and works well on Ubiquiti networking gear. I do want to point out that as of this writing, the Ubiquiti Dream Machine Pro supports this cable, but due to a firmware bug in that product, it will randomly drop the link to whatever is beyond it. Connecting two 48-port switches with this cable (as I did) works flawlessly! I hope this review helps you make an informed purchasing decision!

Used in Ubiquiti Dream Machine Pro and USW-16-PoE as a 1Gb connection. Manually set speed on UDM Pro and switch. Cheaper than getting two SFP modules.