Shirbly Solar Panel Wire - 50FT Black & 50FT Red Tinned Copper Wire, 10AWG (6mm²) PV Wire Solar Extension Cable for Outdoor Automotive RV Boat Marine Solar Panel- Black & Red (10AWG 50FT)

I needed to make some extensions for my solar panels and this worked great

I was happy when I noticed that this looked and felt like it was actually some good wire. Sometimes it isnt so good, but this is not one of those times. I am sure you will be happy too.

This sems like decent wire. Sturdy and easy to strip. I used these to make temporary extension cords from an inverter to some solar panels. It was WAYYYY cheaper to make my own than buy. This is quality wire and comes well packed.

Nothing

I use these for my battery bank in my barn. They work gray and made no negative difference in my power flow (had old copper lines before that were deteriorating).

Sheathing was solid and wire provides a high-quality feel to me. I have been working with wire for 10 years in a public works capacity, so I handled wire daily...

I have some other cable from Shirbly and the quality of the cable appear to be top notch. Nicely packaged, flexible, think insulation, and it looks so nice. The lettering on the cable is very clear and easy to read so it should be clearly readable for many years. I didnt want something cheap and so far Shirbly has provided some really nice cables. Not the most expensive either so definitely worth the price. I highly recommend their products.

I needed to make an extension cord for a solar panel and needed 10ga high quality wire that was waterproof. This product met my needed.

I ordered several brands of solar wire to test out various solar configurations in my new solar setup. This one appears to be the best. The sheathing covering the strand wire makes it more durable without being difficult to work with. I definitely can notice the improved quality of this compared to others. MC4 connectors went on without issues and this will be the wire I use for my permanent installation. I will update this review in the unlikely event I have issues in the future but from what I’ve seen I don’t expect any.

Summary: When it comes to buying wire/cable, there are lots of variables, so doing some homework is warranted. Aside from the what size wire do I need, here are some other considerations: 1) pure vs. cladded wire, 2) jacket material (PVC, silicone), 3) single or dual (or more wires, 4) indoor/outdoor. Most of the wire I have reviewed has been used in extending a solar panel installation for optimal placement. General Observations: Stranded wire will always be more flexible than solid single conductor (such as house wiring). For most applications, having some flexibility is desirable for ease of installation. For power transmission, pure vs. cladded is the preferred option, but will cost more. For outdoor or direct bury applications, you will want to select a suitable jacket material. I have left silicone wire out in the sun for a month, and it has faded (which is why UV rated jackets are desired in those applications). RAKDSYMC Observations: This one does not specify the jacket material (likely PVC). This is a single insulated jacket, 10AWG wire. A 2x30 ft length for $40, so cost is $0.67/foot. The ends are not terminated. This one is lower cost than the other comparable offerings, but does not include any termination, so overall cost ends up being the same once you add connectors (I added MC4). This company has few wire options, therefore a non-specialty manufacturer. SHIRBLY Observations: This is a single wire offering, PVC insulated jacket, 10AWG wire. A 50 ft length for $28, so cost is $0.56/foot. The ends are not terminated. This one is lower cost than the other comparable offerings, but does not include any termination, so overall cost ends up being the same once you add connectors (I added MC4). This company has few wire options, therefore a non-specialty manufacturer. HAERKN Observations: This is a bonded pair of 10AWG, red/black, with a silicone jacket. Its a single 10ft length (20ft of single conductor), so cost is $0.85/foot. The ends are not terminated. The SHIRBLY below is the same cost, but includes four (4) MC4 connectors, about $4 value; and also includes a heat resistant sheath (value unknown). HAERKN has nine wire offerings (non-specialty). MATUGAJP Observations: This is a pair of 10AWG wires, inside another protective sheath; PVC jacket. Cost is $22 for 10ft length (20ft of single conductor), so cost is $1.10/foot. The 20ft offering is $0.78/foot. The ends are not terminated. This is ideal for PV/Solar applications which have the wire left outside to the weather, as it affords much better protection. MATUGAJP only has two other wire offerings (non-specialty). Recommendations: Here are some considerations when sizing the wire gauge for your application: 1) the thicker the wire (lower AWG number), the lower resistance, and more efficient; 2) the downside to thicker cables, is its heavier, and sometimes less flexible; 3) higher voltage will lead to insulation breakdown (these are rated for 600 VDC). For the jacket material: 1) silicone is more expensive than PVC; 2) silicone has a much higher working temperature range; 3) silicone is more flexible (wire gauge and type contribute more though). Silicone jacket is soft and tears easily. Typically, with previous 2-wires I have used (especially PVC), you can split the wires apart by pulling them apart, but if you do that with silicone, the jacket sometimes tears. Youll need to use a very sharp knife and very CAREFULLY cut down the middle. I add a piece of heat shrink tube to also stop it from further splitting. Application: Used some 10AWG to rewire a small 10A MPPT controller, which had cheap and too small 16AWG wire. While 10AWG is slightly oversized for such a low current application, it is much more efficient. Pros: Decent fit & finish; PVC jacket (MATUGAJP, SHRIBLY) or silicone jacket (HAERKN). Cons: Cost of these is higher than similar offerings; both are non-specialty wire manufacturers. RAKDSYMC didnt specify jacket material. Conclusion: At current price points, rating all of these 3-stars (non-specialty manufacturer). Related Products: RAKDSYMC, 30FT 10AWG (6mm²) Solar Extension Cable, Red & Black (10awg 30ft) ~ $39.99 > $0.67/foot 4.0 out of 5 stars 2 ratings https://www.amazon.com/dp/B0B6841KT9 SHIRBLY, Solar Panel Wire - 50FT Red Tinned Copper Wire, Red (10AWG 50FT) ~ $28 > $0.56/foot4.8 out of 5 stars 43 ratings https://www.amazon.com/dp/B09XMP3PK7 Matugajp, 10 Gauge Wire 10/2 Electrical Wire 2 Conductor Extension Cable 10ft ~ $22 ($0.78/foot) 4.3 out of 5 stars 17 ratings https://www.amazon.com/dp/B0B714ND5V Shirbly Twin Wire Solar Panel Wire - 15FT 10AWG(6mm²) Solar Panel Extension Cable ~ $27 ($0.83/foot) 4.7 out of 5 stars 4 ratings https://www.amazon.com/dp/B0B5618FD4 HAERKN, 10awg Silicone Electrical Wire Cable 6 Colors 6x10FT 10 Gauge Hookup, Brand: $51 ($0.83/foot) 4.0 out of 5 stars 3 ratings https://www.amazon.com/dp/B09DPHHPGB Iron Forge Cable 10 Gauge Primary Wire 2 Pack - 25ft Pure OFC, 1 Red and 1 Black ~ $32 ($0.64/foot) 4.4 out of 5 stars 9 ratings https://www.amazon.com/dp/B099NS9BPW