T Phael Black Digitizer Repair Kit for 2017 iPad 9.7(A1822, A1823) / iPad 5 iPad Air 1st Touch Screen Digitizer Replacement (Without Home Button) with Tools + PreInstalled Adhesive

Would have given it five stars but it doesnt include a home button. Was nervous removing the old screen, glass will continue to break. Be cautious around the home button, (cut mine), so you dont cut you home button ribbon cable. Once removed this was an easy install. Using digital screen button. Since its only $20 Im going to order another but with a home button.

Just like the title says, it comes with bunch of useless tools for replacing digitizer. Maybe 4-5 tools are useful, the rest are useless. And even those 4-5 tools are cheaply made, especially plastic ones that rub off pretty quick. Digitazer itself is fine, I just wish itd come with useful tools. UPDATE after one week of usage the touch screen is gone hectic, opens apps and types things on its own. Now I cant even type in pin in order to get into ipad. The digitizer types in wrong pin by itself and the ipad gets disabled. Piece of junk digitizer.

Make sure you have a you tube video ready to walk you through this because there is absolutely no instructions with this!!

The device starts acting up after about 4 days and then the touch response goes all over the place.

Excellent works without problems

Relatively easy to install and works perfectly. A word of advice, make sure you successfully remove the old digitizer before purchasing. The YT videos make it look way easier than it really is. I don’t think the adhesive is sufficient. I keep my iPad in a case so I don’t have to worry about it but I do think it would require pressure and heat for it to work well.

ordered two of these. both broke within a week. I do not recommend at all. would have requested a replacement if i thought it was worth it.

Takes time and patience but worked well. Be care with the home button as one is not included with this kit. Worked great for my project

As is typical for replacement screens, this screen had two protective films, one over the outer surface and one over the inner surface. The film on the outer surface had a handy tab to catch it and pull it off. The film on the inner surface was missing this pull tab. I could not find the edges to remove it. Additionally, the cables were taped on to the digitizer, and when I removed the tape it pulled a large section loose from the inner surface of the digitizer. While this loose part did not allow for removal of the film, It did create a large bubble under the digitizer that looks really bad. I was able to squeeze out about half of it, which still did not create an opening to remove the film. The other half of the air remains in the bubble and created a permeate visual defect on the screen. Everything works, it just looks really bad!

Do not buy. After spent 2 hours taking the cracked screen out and install this one it Only worked for about 2 weeks.