T Phael Black Digitizer Repair Kit for 2017 iPad 9.7(A1822, A1823) / iPad 5 iPad Air 1st Touch Screen Digitizer Replacement (Without Home Button) with Tools + PreInstalled Adhesive
-
Amanda
> 3 dayThe included tape didn’t work very well but the screen worked fine. Would buy again but make sure you have electronics adhesive to hold it in good.
-
Mr. Alfred Nolan MD
> 3 daytoo bad. It cracks after 2 months
-
Riki moore
> 3 dayTime, you tube, patience ✨
-
Aliza Parisian
> 3 dayAs is typical for replacement screens, this screen had two protective films, one over the outer surface and one over the inner surface. The film on the outer surface had a handy tab to catch it and pull it off. The film on the inner surface was missing this pull tab. I could not find the edges to remove it. Additionally, the cables were taped on to the digitizer, and when I removed the tape it pulled a large section loose from the inner surface of the digitizer. While this loose part did not allow for removal of the film, It did create a large bubble under the digitizer that looks really bad. I was able to squeeze out about half of it, which still did not create an opening to remove the film. The other half of the air remains in the bubble and created a permeate visual defect on the screen. Everything works, it just looks really bad!
-
Fred C
20-11-2024Nope. 2 nd time around w this seller. First screen lasted 8 mos. This one DOA from the start. Time for a new vendor.
-
The CrossKamps
Greater than one weekDidnt come with adhesive
-
Kimberlee
> 3 dayExcellent product that will fix your problem.
-
ChristiAnn
> 3 dayTakes time and patience but worked well. Be care with the home button as one is not included with this kit. Worked great for my project
-
Cory Laird
> 3 dayAll around terrible. The packaging was pretty much the screen inside a cardboard box with a very thin layer of bubble wrap. Then the ribbon cables for the screen are longer then the original which caused the screen to raise and crack. Not to mention the adhesive is terrible. Youd be better off rubbing Elmers glue on it.
-
Blake
> 3 dayGotta give it a bad review because it fails to come with adhesive to re attach your home button and also no adhesive around forward facing camera plastic shroud. So it is not a useable product in my book.