UPGRADED VERSION 3 PACK HEPA Replacement V10 Filters Compatible with Dyson V10 Cyclone series, V10 Absolute, V10 Animal, V10 Total Clean, V10 Motorhead, SV12, Part No. 969082-01, Washable and Reusable

(0 Reviews)

Price
$19.99

Quantity
(10000 available )

Total Price
Share
99 Ratings
80
14
3
1
1
Reviews
  • PamF

    > 3 day

    I originally wrote a negative review and found a large clog in the actual vacuum. Once cleared the filter worked well. Nice not having to wait 2 to 3 days for washed filter to dry.

  • Cadman

    Greater than one week

    i liked that there was a small brush included to help clean the filters. very thoughtful.

  • M. Earl

    > 3 day

    I put the first filter on the vacuum and it was great to have the suction power back. After using it for a few weeks, it needed to be cleaned and I was excited to just put another one on while the first one was washed and left to dry. The second one wouldnt work and when I tried to remove it from the vacuum it appears to have not been glued together correctly. I had to dig it out with pliers (not difficult in any way). I put the third filter in and it worked great. I contacted the company directly about the bad filter and asked if I could get a replacement for just the one. I was still in the return period, so I could have returned them to Amazon for a refund, but two were great. They contacted me within hours and said they couldnt replace a single filter, but they would refund the prorated amount of the filter if that was ok with me. I replied back with the affirmative and the refund was issued the next day. Extraordinary customer service. I did mark down the overall rating by 1 because I did get a defective filter, but based on other reviews I read, this is probably an anomaly.

  • Casper Felix

    > 3 day

    I was led to believe that the HEPA filter that came with the V10 was supposed to be a lifetime filter that you just needed to wash in the sink. That couldnt be further from the truth. I have tried multiple times to clean that thing. Im almost certain that its just as dirty after washing it and waiting 2+ days for it to dry. After a while the stink from the filter and vacuum got so bad I knew it was time to replace the filter. I went to Amazon and sure enough there was plenty of options. The official Dyson filter is $40 for a single filter. I figure you should skip the whole washing nonsense and just replace the filter every few months. With that said, $40 is going to add up quickly. I found this 3-pack for less than $20. I figured thats an awesome price and definitely makes the filters disposable. But would they work as well as the original??? Yup! They work just as good as the original. I couldnt even tell the difference when I help the original and the new filter side by side. The fabric is just as thick and it fits into the vacuum perfectly. Best of all, no more smell!!!

  • T.Kessler

    > 3 day

    I had no problem attaching the filter and there was a noticeable increase in suction.

  • L. Perkins

    > 3 day

    I bought these filters as a replacement for my Dyson filter because they are much cheaper than the Dyson brand. So far I havent needed to change the filter so cant speak for how well they fit my machine or how well they work at keeping dust out of the motor. Once they have been tested I will leave another review.

  • larry b

    > 3 day

    I have 2 Dyson sticks. They work great. My opinion is: you need to change filters often. Don’t was filters & reuse. Throw them away. Micro dust gets through filter into motor, handle, everywhere. Take it outside and blow it out with a compressor. Carefully. Wear a mask & eye protection. I noticed a huge difference in house smell after use. These things pick up stuff that must vscs don’t or can’t. Trouble is: they can’t make a filter to keep that micro dust from getting into everything. Change filters often. Blow it out. If you’re mechanically inclined, take apart handle and blow it out. The smell will go away. But you have to maintain these. If you can’t do it, take to a vacuum shop. You’ll smell the difference. At minimum, buy filters and change them often.

  • heather d

    > 3 day

    Great price. Fits very tight and it must be just right for the vacuum to work. Seems to make a louder noise. Saved my old filter in case they don’t continue to fit just perfect.

  • Suznmarie

    09-06-2025

    So glad to see these on Amazon!

  • Patrick

    > 3 day

    Almost fit well like OEM but it works. Needs to force it in.

11
1 1 1 1
V10 Filter V11 Filter TP HP
Replace Part No. 969082-01 No. 970013-02 No.968126-03 No.968125-03
Item Quantity 3 4 1 1
Applicable Models Dyson V10 Cyclone series, V10 Absolute, V10 Animal, V10 Total Clean, V10 Motorhead, Dyson SV12 Series Vacuum Cleaner. Dyson V11 Torque Drive V11 Animal V15 Detect Vacuum. NOT WORKS ON V11 OUTSIZE! Dyson TP00, TP01, TP02, TP03, AM11, BP01 Dyson DP01, DP03, HP00, HP01, HP02, HP03
Note / NOT WORKS ON V11 OUTSIZE! / /

Related products

Shop
( 409 Reviews )
Top Selling Products