WiFi Extender Signal Booster Long Range Coverage to 8000sq.ft and 45+ Devices, WiFi 2.4&5GHz Dual Band WPS WiFi Signal Strong Penetrability, 360°Coverage Supports Ethernet Port
-
Ryan Holley
Greater than one weekMy Room is far away from our Internet Router before I purchased this, my internet sucked! Once I bought this my internet is great! This range extender was easy to install and set up!
-
MARY
> 3 dayone strategic location permits me to pick up wifi through the house despite granite counter tops and limestone floors and showersworks great
-
ALBERT
> 3 dayreceived this item today and it works great.. part of my house would never run internet over 7mbs out of a 50mbs system/ now with the extender I get 30mbs
-
MARY
> 3 dayThis is working great so far. Been installed for several weeks now and no problems. I extended the WIFI to my basement with this.
-
C. Niemann
> 3 dayNachdem bei meinem alten Kabel die Steckverbindung defekt gegangen ist, habe ich mich dann für dieses Kabel als Neuanschaffung entschieden.
-
KIMBERLY
> 3 dayI was a little apprehensive about this product at first, but this Range Extender works really well. I had an issue with receiving our Wi-Fi upstairs (Wi-Fi) located downstairs and this product solved my problem.
-
Michael Pleschek
> 3 dayAlles Bestens
-
KEITH
> 3 dayReceived my extender today and couldnt be happier.Our WiFi was weak at the far end of the house where we had an addition put on. It was frustrating at times.Unpacked this gadget, plug it in and had it set up in absolutely no time flat, moved it to the intended outlet, allowed it to power up and then connected. The signal is now full all through the addition.I recommend this product to anyone for its ease of set up and wonderful performance.Side note:I chose this particular item based on the other customer reviews.
-
dominik wolf
> 3 daySuper schnell geliefert, Ware wie beschrieben. Top
-
BENJAMIN
> 3 dayWorks great and solves the problem of range in a two story house.Works great and solves the problem of range in a two story house.
|
|
|
|
|---|---|---|
4*3 dBi External Antennas180° and 90° rotating antennas can eliminate dead area and improve your existing WiFi coverage. For better performance and stable WiFi network with speeds of up to 867Mbps, 2.4GHz has farther penetration while 5GHz has faster speed |
Smart Signal IndicatorsSignal LED indicates wireless signal strength between WiFi extender and your existing router. After initial setup, you can move your WiFi extender to any electrical outlets by reading the color of signal LED. |
With Vent Hole & WAN / LAN PortAir vents on both sides enhance heat dissipation capacity of the WiFi extender and ensure a safe working environment. Its WAN / LAN Port allows the WiFi extender to act as a wireless adapter to turn a wired device into a wireless one. |
|
|
|
|
|---|---|---|
Repeater Mode - Wireless to WirelessAmplify the WiFi signal of the wireless router, extend the coverage of the WiFi signal, and effectively solve the problem of weak WiFi signal and WiFi dead zone. (Suitable for home, office use) |
Repeater Mode - Wireless to WiredConvert wifi signals into wired signals through network cables to meet the network requirements of wired electronic devices, such as TVs, desktop computers, etc., reduce the distance of network cables, and avoid cluttered network wiring. |
Access Point Mode- Wired to WirelessUse Ethernet cable to connect this WiFi booster range extender to any Internet enabled Ethernet port in your room or Ethernet port of existing router, you can create a new dual band wireless network. Excellent for using at home or when travelling in hotel rooms. |
Reminder:
- The working status of the repeater can refer to its smart indicator light.
- WiFi signal booster is only limited to increase the coverage of the wireless signal, but not to increase the speed of the network.
- When the repeater expands the signal, it does not need to plug in the network cable. It can receive the signal of the router directly by plugging it into the socket, and transmit the wireless signal.
- When the repeater is unplugged or powered off after the setting is completed, it does not need to be reset. The original configuration information has been saved, unless you manually restore the factory state.