WiFi Extender Signal Booster Long Range Coverage to 8000sq.ft and 45+ Devices, WiFi 2.4&5GHz Dual Band WPS WiFi Signal Strong Penetrability, 360°Coverage Supports Ethernet Port
-
MARGARET
> 3 dayThis device is so cool. Follow instruction and the device set up is easy. So happy we didnt listen to the few negative review.
-
CHRISTINE
Greater than one weekI needed to get relay from the equipment in the cellar to the top (third) floor - set up the unit on the first floor and it works very well. Very easy to do.
-
Mustafa Ceylan
> 3 dayIch hatte erst bei einem anderem Verkäufer bestellt aber das Produkt hat nicht funktioniert.
-
JERRY
> 3 dayWorks very well, extended current wireless to half of the house: 2 bars to 5 bars.Easy set up via web site.Highly recommend tried 2 other brands which failed.
-
JERRY
> 3 dayEasy and hasselfree setup. The wifi signal increased at least 50% in the most remote room and had no interference. The outperformed the extender I had been using and covered the whole house.
-
PATRICIA
> 3 dayThis product works well. It was simple to connect. I have a large house and plugged it in around the middle of the house, so i have wifi everywhere now
-
Lourdes
> 3 dayCumple perfectamente con su propósito, buena compra.Cumple perfectamente con su propósito, buena compra.Cumple perfectamente con su propósito, buena compra.Cumple perfectamente con su propósito, buena compra.
-
Privat
Greater than one weekDas Kabel ist bereits defekt nach zwei Monaten.
-
BENJAMIN
> 3 dayEasy to configure and install . Covers a wide area away from the main router . Excellent signal strengthThis made an amazing difference in wireless range in my old house. Highly recommend.
-
JERRY
> 3 dayEasy to install. Works great to extend my house wifi. Router is in one corner of a large two story. This could not reach our garage or master bedroom. So I put this in the kitchen and it extended the range and worked great.
|
|
|
|
|---|---|---|
4*3 dBi External Antennas180° and 90° rotating antennas can eliminate dead area and improve your existing WiFi coverage. For better performance and stable WiFi network with speeds of up to 867Mbps, 2.4GHz has farther penetration while 5GHz has faster speed |
Smart Signal IndicatorsSignal LED indicates wireless signal strength between WiFi extender and your existing router. After initial setup, you can move your WiFi extender to any electrical outlets by reading the color of signal LED. |
With Vent Hole & WAN / LAN PortAir vents on both sides enhance heat dissipation capacity of the WiFi extender and ensure a safe working environment. Its WAN / LAN Port allows the WiFi extender to act as a wireless adapter to turn a wired device into a wireless one. |
|
|
|
|
|---|---|---|
Repeater Mode - Wireless to WirelessAmplify the WiFi signal of the wireless router, extend the coverage of the WiFi signal, and effectively solve the problem of weak WiFi signal and WiFi dead zone. (Suitable for home, office use) |
Repeater Mode - Wireless to WiredConvert wifi signals into wired signals through network cables to meet the network requirements of wired electronic devices, such as TVs, desktop computers, etc., reduce the distance of network cables, and avoid cluttered network wiring. |
Access Point Mode- Wired to WirelessUse Ethernet cable to connect this WiFi booster range extender to any Internet enabled Ethernet port in your room or Ethernet port of existing router, you can create a new dual band wireless network. Excellent for using at home or when travelling in hotel rooms. |
Reminder:
- The working status of the repeater can refer to its smart indicator light.
- WiFi signal booster is only limited to increase the coverage of the wireless signal, but not to increase the speed of the network.
- When the repeater expands the signal, it does not need to plug in the network cable. It can receive the signal of the router directly by plugging it into the socket, and transmit the wireless signal.
- When the repeater is unplugged or powered off after the setting is completed, it does not need to be reset. The original configuration information has been saved, unless you manually restore the factory state.