2023 New Upgrade WiFi Extender Booster Repeater, Up to 8000sq.ft and 45+ Devices, 2.4&5GHz Dual Band Wireless Internet Repeater and Signal Amplifier for Home & Outdoor, Supports Ethernet Port
-
thqrb bdye
> 24 hourSet up was very easy: just press the WPS button on your router and then on this device. I think the signal is a little weak. It fades to one bar in less than 20 ft on the same floor. Nice clean design and seems well made.
-
JOYCE
> 24 hourEasy to install, works just as described. Dramatically increased the range of my WiFi network, and is easy to use and reposition.
-
SANDRA
> 24 hourThis Wi-Fi Range Extender was easy to set up. I just plugged it into an electric outlet, waited for it to turn green, pressed the WPS button on my router and on the extender and waited for another green light.
-
klinhgf
> 24 hourEven tho I got 100 percent signal on my ps4 from my router it still be lagging unless I move in right stop so it could reach where ps4 at., but this is better Cus even when I play street fighter and the person signal lo it still dont lag. So it 5 for sure.
-
BENJAMIN
> 24 hourThis did exactly what it say it will do. A fantastic little product that expanded the wi-fi signal in my home. Way better than buying a new router for a $100.
-
Virgie Brekke
> 24 hourschlichtes einfaches kabel für einen super preis.man muss nicht unbedingt viel Geld ausgeben für gute ware. das kabel erfüllt alle Anforderungen.nur empfehlenswert? danke
-
Alwin Kraiczek
> 24 hour10 Meter lang, erfüllt seine Aufgabe sehr gut und von optisch her gefällt mir dieses Produkt sehr gut. Deshalb hat er 5 Sterne verdient.
-
MARY
> 24 hourPurchased to increase ability and reliability to connect to a weak wifi router signal. Works beautifully. Result is more than I could have hoped for. Great purchase.
-
Floyd Carter
> 24 hourPlugged it in,presed the button and worked 100%. Can highly recommend this product for use in the home. Bit expensive but worth every penny.
-
GfA
> 24 hourSehr schnelle Lieferung. TOP.
|
|
|
|
|---|---|---|
4*3 dBi External Antennas180° and 90° rotating antennas can eliminate dead area and improve your existing WiFi coverage. For better performance and stable WiFi network with speeds of up to 867Mbps, 2.4GHz has farther penetration while 5GHz has faster speed. |
Smart Signal IndicatorsSignal LED indicates wireless signal strength between WiFi extender and your existing router. After initial setup, you can move your WiFi extender to any electrical outlets by reading the color of signal LED. |
With Vent Hole & WAN / LAN PortAir vents on both sides enhance heat dissipation capacity of the WiFi extender and ensure a safe working environment. Its WAN / LAN Port allows the WiFi extender to act as a wireless adapter to turn a wired device into a wireless one. |
|
|
|
|
|---|---|---|
Repeater Mode - Wireless to WirelessAmplify the WiFi signal of the wireless router, extend the coverage of the WiFi signal, and effectively solve the problem of weak WiFi signal and WiFi dead zone. (Suitable for home, office use) |
Repeater Mode - Wireless to WiredConvert wifi signals into wired signals through network cables to meet the network requirements of wired electronic devices, such as TVs, desktop computers, etc., reduce the distance of network cables, and avoid cluttered network wiring. |
Access Point Mode- Wired to WirelessUse Ethernet cable to connect this WiFi booster range extender to any Internet enabled Ethernet port in your room or Ethernet port of existing router, you can create a new dual band wireless network. Excellent for using at home or when travelling in hotel rooms. |
Reminder:
- The working status of the repeater can refer to its smart indicator light.
- WiFi signal booster is only limited to increase the coverage of the wireless signal, but not to increase the speed of the network.
- When the repeater expands the signal, it does not need to plug in the network cable. It can receive the signal of the router directly by plugging it into the socket, and transmit the wireless signal.
- When the repeater is unplugged or powered off after the setting is completed, it does not need to be reset. The original configuration information has been saved, unless you manually restore the factory state.
