8 Pack Strip Disc Stripping Wheel - for Angle Grinders Remove Rust Paint Stripping Wheel Clean Coating Welds Rust Oxidation (4 x 5/8)

It just came in today and in no time I was able to remove all of the loose paint from my houses foundation. The next sunny day it will be ready for fresh paint

These are great quality. They fit on the grinder like they should and are well balanced. They are very aggressive and remove paint quickly. They also last much longer than the black ones from the big box stores.

These are a great way to remove rust when preparing the surface for welding or painting. I turn to these before ever using a wire wheel or sanding disc. Good functional tool. One issue is the grit designation or lack of it. There is no information on the discs, and two colors: blue and purple. For abrasive products this usually means different grits. Only indication is in the Amazon description which notes 60 grit. Is this for one color or both? Other than that these are very useful.

I am pleasantly surprised that these abrasive stripping wheels as they lasted as long as they did. I am grinding and stripping of old welds on a project and needed some stripping wheels. I see these available and at a great price and thought it would take four or five of them to complete my job. Here I am, only used one of the wheels and my job is complete. I have a H. Freight 4 special grinder using the 5/8 arbor. This is some tough mesh and resin they used for these wheels. I used the wheels on 2024 Aluminum with about a 47 hardness and they worked great and didnt damage the material. I also used the wheels on 310 Annealed stainless steel with no problem. It was able to cut out with ease. 5 stars to WMAZtool for their TOUGH Stripping Wheels! Thanks :)

So far I think this disk works well. They do not last as much as other overprice disks. But they do the job.

These are a great way to remove rust when preparing the surface for welding or painting. I turn to these before ever using a wire wheel or sanding disc. Good functional tool. One issue is the grit designation or lack of it. There is no information on the discs, and two colors: blue and purple. For abrasive products this usually means different grits. Only indication is in the Amazon description which notes 60 grit. Is this for one color or both? Other than that these are very useful.

These discs chucked into an angle grinder are quite powerful at removing surface coatings. Being high speed, high RPMs, its not a subtle process but fast and thus very effective. Do beware of lead paint though. I think stripping lead paint is not advised by any mechanical means. The abrasive material has some give to it, which means that it is fairly gentle on the substrate material. It did not try it on wood, but on metal, concrete or glass, its fair to say that you can remove the coating without fear of damaging the substrate. These currently sell for under $3 per disc after coupon. While that does not seem super cheap to me, it represents a reasonable value.

These work well enough for surface prep for removing rust and old paint prior to welding and priming, however, there is zero indication as to what grit these are.

The Strip Disc Stripping Wheel was using to strip rust of an outdoor metal shelving and hand rails. It did a good job of strip off the major of the rust on a metal shelve, on the hand rails about 65%. There are few places it can not get to and require a difference stripper and/or manually.

Impressive. The grinding material seems to be glued or fused to the arbor plate. I need this type of glue for everything! With that said - the grinding material sticks well to the plate it is attached to which of course is important. And what is this grinding material? Description states high-strength wear-resistant fiber mesh and combines resin elastomer and high-quality black diamond. It certainly does the job and does it well. All you need is a light touch to start. Work smarter - not harder. The grinding material seems to be flexible yet sturdy. Takes some finesse to get it done right. I easily removed the rust from entire metal leg I show in the picture and the grinding disc showed minimal loss of material. These should last for quite a while. I used the blue for removing the rust because I believe the purple discs are for heavier jobs. This was magically answered in the question section - not the description. I had to tighten the grinding disc to my angle grinder by hand. My tightening tool does not reach into the depths of the disc because of the thickness of the grinding material. I wore gloves and turned the wheel with the grinders lock on until it wouldnt turn anymore. I am confident it is secure but will keep an eye on it. Reverse this procedure to remove the disc. It is a perfect fit for my tool. No material other than rust went flying. I thought the material might grind off but it was not noticeable at least. Eventually I am sure they wear down. It looks like they might even clog up but that will depend on the material you are grinding/polishing. Of course, always use eye protection and unplug your tool when changing wheels. I consider myself very aware of possible hazards but lost the tip of one finger years ago to a silly mistake. Luckily, I have nine more fingers that still work fairly well. Always be safe. The product appears sturdy and well built. Very well built. These will make some hard jobs easy. A must have for the toolbox. They are a great value for an eight-pack. Neat product.