Anycubic Upgraded ABS-Like 3D Printer Resin, Hardness and Toughness 405nm UV-Curing 8K Resin, High Precision and Easy to Post-Process Standard Photopolymer Resin for LCD DLP 3D Printing (Grey, 1kg)

I have had more difficulties with this resin than competitors. I am not sure if it is just the batch or the temperature but I have had more failed layers with this than its competition. It still does its job but I have found myself doing several reprints. It is usable but requires some tinkering to get to a decent state. I will probably avoid repurchasing this resin for a while.

Resina de facil utilização e com um excelente acabamento

This resin very, very strong but it must be used in very well ventilated areas because it smells terrible while printing. Also, be aware that printers with exposure times up to 18 seconds are not recommended. Only use this if your printer is optimized for up to 3 second exposures. Even with the smell I would still recommend this resin.

Easy to print and good results with Anycubic Mono.

Habe kaum brauchbare Teile damit drucken können, trotz verschiedenster Anpassung der Parameter. Drucke ja schon ein paar Jahre, aber sowas habe ich noch nicht erlebt. Selbst 2,5mm dicke Teile sind auch nicht schwarz, sondern eher bräunlich durchsichtig. Die weingen brauchbaren Teile ließen sich unglaublich schwer reinigen. Auch in der Waschbox setzte sich das Harz überall zu einer extrem klebrigen Masse ab, die sich kaum mit verschiedensten Lösemitteln entfernen ließen. Wie extrem zäher Kaugummi. Eine richtige Sauerei. Hat mich Tage gekostet, alles wieder sauber zu bekommen. Daher kann ich dieses Harz nicht empfehlen. Werde es entsorgen und nie wieder in die Nähe meines Druckers lassen.

I was amazed by this clear resin initially. All my prints were coming out almost as clear as water! Then I put a few pieces out in the sun to cure and they came back completely yellowed! Not just a hint of yellow, full blown translucent yellow! I even tried to add dye and it still turned yellow; the dyed color is basically ruined. I googled this and it turns out clear resin has a tendency to turn yellow from uv light. If I had known this, I would not have gotten this clear resin. They should have put a clear warning on the listing. Even if you coat it with something, itll eventually turn yellow from uv light.

The product is okay. You must make sure that your room temp is at least 24deg C. You will also have to adjust your printer settings to values higher than you might otherwise have used. Once dialed in print quality is very good

I found this to be nothing like ABS. very very brittle. I print for film and TV and i would never use this again. I see someone else from the UK having same problem...it could be temperature sensitive as its been cold here for months.

Das Harz ist sehr spröde und riecht sehr unangenehm. Habe vorher immer Elegoo ABS like resins verwendet, die ein wenig flexibler sind. Habe sowohl mit anyycubic als auch mit elegoo Druckern gearbeitet. Werde ich nicht noch einmal kaufen.

I tried this after using Anycubic washable resin and to be honest, it seems very brittle for something that is advertised to be ABS Like. I bought two bottles thinking it would be really good but now I wish I had only bought one. The only pro I see with this is it has good detail on the prints