Anycubic Upgraded ABS-Like 3D Printer Resin, Hardness and Toughness 405nm UV-Curing 8K Resin, High Precision and Easy to Post-Process Standard Photopolymer Resin for LCD DLP 3D Printing (Grey, 1kg)

Habe kaum brauchbare Teile damit drucken können, trotz verschiedenster Anpassung der Parameter. Drucke ja schon ein paar Jahre, aber sowas habe ich noch nicht erlebt. Selbst 2,5mm dicke Teile sind auch nicht schwarz, sondern eher bräunlich durchsichtig. Die weingen brauchbaren Teile ließen sich unglaublich schwer reinigen. Auch in der Waschbox setzte sich das Harz überall zu einer extrem klebrigen Masse ab, die sich kaum mit verschiedensten Lösemitteln entfernen ließen. Wie extrem zäher Kaugummi. Eine richtige Sauerei. Hat mich Tage gekostet, alles wieder sauber zu bekommen. Daher kann ich dieses Harz nicht empfehlen. Werde es entsorgen und nie wieder in die Nähe meines Druckers lassen.

After my first print with this resin (using the recommended settings for my Mono X 6k) I can say without a doubt this is one of the strongest resin blends I have experienced. Rather than snap, it will flex or remain completely stiff against strong forces. I struggled to bend a smaller part that would traditionally have snapped. The smell is definitely noticeable, however I have never found it to be obnoxious or unable to be delt with any more than normal resin.

Ive been getting some really good results with this resin without having to do any troubleshooting. My models are coming out clean with streamlined edges and smooth finish, with the toughness that comes with using ABS like resins. This resin has been easy to use with both of my printers, and doesnt require any special parameters during post or for curing. In terms of odor, its barely noticeable which is a plus. SETTINGS: * Printer = Mars 2 Mono, Halot One Plus * Layer = 0.05mm * Bottom layers = 10 * Bottom exp time = 50s * Layer exp time = 4s * Lift delay = 4s * Cure time = 15min * Wash time = 25min Superb resin that provides consistent and reliable results.

Conforme à la description. Emballage soigné

This resin very, very strong but it must be used in very well ventilated areas because it smells terrible while printing. Also, be aware that printers with exposure times up to 18 seconds are not recommended. Only use this if your printer is optimized for up to 3 second exposures. Even with the smell I would still recommend this resin.

The product not only meet my expectations But it has exceeded them

Im using this resin with my Creality Halot-One printer, and the best thing I can say about any resin is that it worked on my default settings with no fiddling. It makes nice clean prints with crisp edges and details. It cleans off easily and has good flexibility and strength when cured. I mostly use it to make miniatures for gaming, and I cant say strongly enough that the prints come out looking every bit as good as the models did on my screen. As Ive said with other Anycubic resins, phrases like low odor really are in the nose of the beholder, but while I can definitely smell this resin, the odor doesnt coat the back of my throat like some do. That alone makes this resin worth the cost in my book!

It’s much nicer than regular resin but still pretty brittle for my purposes.