Anycubic Upgraded ABS-Like 3D Printer Resin, Hardness and Toughness 405nm UV-Curing 8K Resin, High Precision and Easy to Post-Process Standard Photopolymer Resin for LCD DLP 3D Printing (Grey, 1kg)

cette résine est excellente jadore. fait grave le taf. jai du mal a marrêter dimprimer XD

The quality and detail I get from this resin is astounding. Using the recommended initial settings from the Anycubic website and an old first generation Photon.

imprimes... y queda abs-like xDDD no tiene mas.....

This is without a doubt the worst resin I’ve ever used. Fails nearly every time and separates within about 1 hour of mixing. Will never purchase again.

When printing big pieces, the finished product has a yellowish color, but that is already expected. Still, sturdy as hell and a good buy.

I have had more difficulties with this resin than competitors. I am not sure if it is just the batch or the temperature but I have had more failed layers with this than its competition. It still does its job but I have found myself doing several reprints. It is usable but requires some tinkering to get to a decent state. I will probably avoid repurchasing this resin for a while.

This resin very, very strong but it must be used in very well ventilated areas because it smells terrible while printing. Also, be aware that printers with exposure times up to 18 seconds are not recommended. Only use this if your printer is optimized for up to 3 second exposures. Even with the smell I would still recommend this resin.

This was my first time using ABS like resin, so I expected a super strong odor and having to completely change my print settings and so on. I was surprised to find odor wise the smell is basically the same as the many other resins Ive used, not stronger or worse. Print wise i did have to adjust my exposure time slightly but so far 2 prints in and Ive gotten great results. post care is the same as any other resin.

Incuriosito dalle critiche ed possessore di Anycubic Mono x, ho deciso di acquistare questa resina Abs like colore nero. A parte che i feedback positivi sono di Recensione Vine di un prodotto gratuito e quindi da non tener in considerazione, ho voluto provare resine del produttore macchina. Laspetto delle stampe è orrendo, fatte varie prove su modelli diversi e di calibrazione, dove per spessori sotto i 2 mm la resina risulta semi trasparente, mentre per spessori più consistenti un nero sbiadito. E già qui un po deluso, rispetto ad altre marche (cit. Elegoo ABS like dove il colore è molto più intenso), le resina risulta sbiadita, nei dettagli e nella durezza lascia un po a desiderare. Se parliamo del costo, non irrisorio e pagata ben 42€/LT, il risultato complessivo è disastroso. Provate varie impostazioni e slicer, ma il risultato non cambia. A questo punto meglio investire qualcosa in più e scegliere resine con prestazioni/dettaglio/resistenza molto più superiori sia nella carta, che nella realtà (es Formfutura e/o Phrozen) Sconsiglio vivamente lacquisto

Ive been using the Anycubic ABS-like to do some bigger prints that I wanted to make sure werent brittle and would be a little more sturdy (think props for costumes). Its working really well so far. I have had to adjust my settings a little bit from my regular resin, but a little trial and error with something new isnt unexpected. On my Mars 3 pro, Im doing some heavier prints, so I increased exposure on bottom layers and on all other layers by a bit, also using beefier supports--parts of my test print stuck to the FEP, so wanted to avoid that. Later prints with updated settings have been working well.